PS7212-1A-E4

PS72121A CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

4 PIN SOP, 100 V

1-CH OPTICAL COUPLED MOSFET PS7212-1A

FEATURES

• SMALL AND THIN PACKAGE: 4 pin SOP, Height = 2.1 mm
• 1 CHANNEL TYPE: 1a output
• LOW LED OPERATING CURRENT: IF = 2 mA
• DESIGNED FOR AC/DC SWITCHING LINE CHANGER
• LOW OFFSET VOLTAGE
• SURFACE MOUNT AVAILABLE: PS7212-1A-E3, E4, F3, F4

DESCRIPTION

The PS7212-1A is a solid state relay containing GaAs LEDs on the light emitting side (input side) and normally open (N.O.) MOS FETs on the output side. It is suitable for analog control because of its low offset and high linearity.

APPLICATIONS

• LAPTOP PC, PDA
• MODEM, CARD
• TELEPHONE, FAX
• MEASUREMENT EQUIPMENT California Eastern Laboratories Note: 1. Test Circuit for Switching Time IF Pulse Input Input Monitor VO Monitor VL Rin RL Input 50% VO = 5 V 90% 10% ton toff Output PART NUMBER PS7214-1A SYMBOLS PARAMETERS UNITS MIN TYP MAX VF Forward Voltage, IF = 10 mA V 1.2 1.4 IR Reverse Current, VR = 5 V µA 5.0 ILOFF Off-State Leakage Current, VD = 100 V µA 0.03 1.0 COUT Output Capacitance, VD = 0 V, f = 1 MHz pF 57 IFon LED On-State Current, IL = 200 mA mA 2.0 Ron On-state Resistance, I F = 10 mA, IL = 10 mA Ω 3.0 6.0 IF = 10 mA, IL = 200 mA t≤10 ms tON Turn-on Time1, IF = 10 mA, VO = 5 V, PW ≥ 10 ms ms 0.35 1.0 tOFF Turn-off Time1, IF = 10 mA, VO = 5 V, PW ≥ 10 ms ms 0.08 0.2 RI-O Isolation Resistance, VI-O = 1.0 kVDC Ω 109 CI-O Isolation Capacitance, V = 0 V, f = 1 MHz pF 0.5 Diode Coupled ELECTRICAL CHARACTERISTICS (TA = 25 °C) MOSFET 1 2 PS7212-1A

SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current (DC) mA 50 VR Reverse Voltage V 5.0 PD Power Dissipation mW 50 IFP Peak Foward Current2 A1 MOSFET VL Break Down Voltage V 100 IL Continuous Load Current mA 200 ILP Pulse Load Current3 mA 400 (AC/DC Connection) PD Power Dissipation mW 300 Coupled BV Isolation Voltage 4 Vr.m.s. 1500 PT Total Power Dissipation mW 350 TA Operating Ambient Temp. °C -40 to +80 TSTG Storage Temperature °C -40 to +100 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at T A = 25 °C, RH = 60 % between input and output. PS7212-1A SYMBOLS PARAMETERS UNITS MIN TYP MAX IF LED Operating Current mA 2 10 20 VF LED Off Voltage V 0 0.5 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) PART NUMBER PS7212-1A OUTLINE DIMENSIONS (Units in mm) 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 4.0±0.5 2.540.05 0.4 7.0±0.3 4.4 0.5±0.3 +0.10 -0.050.15 1 2 +0.10 -0.05 2.0 2.05 +0.08 -0.05 +0.08 -0.05 0.25 M Top View

ORDERING INFORMATION

PS7212-1A Magazine case, 100 pcs PS7212-1A-E3 Embossed Tape, 900 pcs/reel PS7212-1A-E4 PS7212-1A-F3 Embossed Tape, 3500 pcs/reel PS7212-1A-F4

TYPICAL PERFORMANCE CURVES (TA = 25°C) 100 02 5-25 50 75 80 100 300 200 100 02 5-25 50 75 80 100 1.6 1.4 1.2 1.0 0.8 02 5-25 50 75 100 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 125 100 20 40 80 100 120 60 f = 1 MHz TA = 80˚C 25˚C 10-3 10-4 10-5 10-6 10-7 10-8 10-9 0 2 04 06 08 0 100 120 200 100 IF = 10 mA -100 -200 MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature, TA (°C) Maximum Forward Current, I F (mA) Ambient Temperature, TA (°C) Maximum Load Current, I L (mA) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE Forward Voltage, V F (V) Ambient Temperature, TA (°C) Output Capacitance, C OUT (pF) Applied Voltage, VD (V) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE Off-state Leakage Current, IL off (A) Applied Voltage, VD (V) LOAD CURRENT vs. LOAD VOLTAGE Load Current, IL (mA) Load Voltage, VL (V)

3.0 2.5 2.0 1.5 1.0 0.5 02 5-25 50 75 100 Normalized to 1.0 at TA = 25° C, IF = 10 mA, IL = 10 mA n = 50 pcs IF = 10 mA IL = 10 mA VO = 5 V 2.5 2.0 1.5 1.0 0.5 0 5 1 01 52 02 53 0 VO = 5 V 0.5 0.4 0.3 0.2 0.1 0 5 10 15 20 25 30 n = 50 pcs IF = 10 mA VO = 5 V n = 50 pcs IF = 10 mA VL = 5 V TURN-ON TIME vs. FORWARD CURRENT Forward Current, IF (mA) Turn-on Time, t on (mS) NORMALIZED ON-STATE RESISTANCE vs. APPLIED VOLTAGE Normalized On-state Resistance, R on (Ω) On-state Resistance, Ron (Ω) Number (pcs) ON-STATE RESISTANCE DISTRIBUTION TURN-OFF TIME vs. FORWARD CURRENT Forward Current, IF (mA) Turn-off Time, t off (mS) TURN-ON TIME DISTRIBUTION Number (pcs) Turn-on Time, ton (ms) TURN-OFF TIME DISTRIBUTION Number (pcs) Turn-off Time, toff (ms) TYPICAL PERFORMANCE CURVES (TA = 25°C) Ambient Temperature, TA (°C)

3.0 2.5 2.0 1.5 1.0 0.5 -25 0 25 50 75 100 Normalized to 1.0 at TA = 25° C, IF = 10 mA, VO = 5 V 3.0 2.5 2.0 1.5 1.0 0.5 -25 0 25 50 75 100 Normalized to 1.0 at TA = 25° C, IF = 10 mA, VO = 5 V TYPICAL PERFORMANCE CURVES (TA = 25°C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE Normalized Turn-on Time, t on (ms) Ambient Temperature, TA (°C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Normalized Turn-off Time, t off (ms) Ambient Temperature, TA (°C) TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) TAPE DIRECTION OUTLINE AND DIMENSIONS (REEL) 2.0 ± 0.1 1.55 ± 0.1 8.0 ± 0.1 4.6 ± 0.1 2.4 ± 0.1 0.3 5.5 ± 0.1 7.4 ± 0.1 1.75 ± 0.1 12.0 ± 0.2 2.0±0.5 13.0±1.0 φ13.0±0.5 φ180 φ60 φ13.0±0.5 φ21.0±0.8 15° 15° 2.0 PS7212-1A-E3 PS7212-1A-E4

TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) TAPE DIRECTION OUTLINE AND DIMENSIONS (REEL) 2.0 ± 0.1 1.55 ± 0.1 8.0 ± 0.1 4.6 ± 0.1 2.4 ± 0.1 0.3 5.5 ± 0.1 7.4 ± 0.1 1.75 ± 0.1 12.0 ± 0.2 2.0±0.5 12.4 +2.0 -0.0 φ21.0±0.8 φ330 φ80±5.0 φ13.0±0.5 6.0±1 1.5±0.5 60° 120 1.5 PS7212-1A-F3 PS7212-1A-F4

EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 06/04/2001DATA SUBJECT TO CHANGE WITHOUT NOTICE PS7212-1A Time (s) Package Surface Temperature T (˚C) 100 to 160 ˚C 60 to 120 s (preheating) (heating) to 10 s to 30 s 235 ˚C (peak temperature) 210 ˚C RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

• Peak reflow temperature 235 °C or below (package surface temperature)
• Time of temperature higher than 210 °C 30 seconds or less
• Number of reflows Two
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (2) Dip soldering
• Temperature 260 °C or below (molten solder temperature)
• Time 10 seconds or less
• Number of times One
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions
• Fluxes Avoid removing the residual flux with freon-based cleaning solvent.