PS7211-2A

PS7211-2A CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

SYMBOLS PARAMETERS UNITS MIN TYP MAX VF Forward Voltage, IF = 10 mA V 1.2 1.4 IR Reverse Current, VR = 5 V µA5 ILoff Off-state Leakage Current, VD = 100 V µA 0.03 1.0 C out Output Capacitance, VD = 0 V, f = 1 MHz pF/ch 57 IFon LED On-state Current, IL = 100 mA mA 2.0 On-state Resistance, R ON1 IF = 10 mA, IL = 10 mA Ω 3.4 6.0 R ON2 IF = 10 mA, IL = 100 mA, t ≤ 10 ms tON Turn-on Time1 IF = 10 mA, VO = 5 V, PW ≥ 10 ms ms 0.16 1.0 tOFF Turn-off Time1 0.02 0.2 R I-0 Isolation Resistance, VI-0 = 1.0 KV Ω 109 C I-0 Isolation Capacitance, V = 0 V, f = 1 MHz pF/ch 0.4

FEATURES

• DUAL CHANNEL: 1a + 1a output
• LOW LED OPERATING CURRENT: IF = 2 mA
• DESIGNED FOR AC/DC SWITCHING LINE CHANGER
• SMALL AND THIN PACKAGE: 8-pin SOP, Height = 2.1 mm
• LOW OFFSET VOLTAGE
• AVAILABLE IN TAPE AND REEL

DESCRIPTION

The PS7211-2A is a solid state relay containing GaAs LEDs on the light emitting side (input side) and MOSFETs on the output side. It is suitable for analog signal control because of its low offset and high linearity.

APPLICATIONS

• EXCHANGE EQUIPMENT
• MEASUREMENT EQUIPMENT
• FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25°C)

8 PIN SOP 100 V

2-CH OPTICAL COUPLED MOSFET PS7211-2A Diode MOSFET 876 5 4321 PS7211-2A Note: 1. Test Circuit for Switching Time: IF Pulse Input Input Monitor VO Monitor VL R in R L Input 50% VO = 5 V 90% 10% ton toff Output California Eastern Laboratories Coupled

ABSOLUTE MAXIMUM RATINGS 1 (TA = 25°C) PS7211-2A SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current (DC) mA 50 VR Reverse Voltage V 5 PD Power Dissipation mW/ch 50 IFP Peak Forward Current2 A1 MOSFET VL Break Down Voltage V 100 IL Continuous Load Current mA 100 ILP Pulse Load Current3 AC/DC Connection mA 260 PD Power Dissipation mW/ch 180 Coupled BV Isolation Voltage 4 V 1500 PT Total Power Dissipation mW 460 TOP Operating Temperature °C -40 to +80 TSTG Storage Temperature °C -40 to +100 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage 2. PW = 100 µs, Duty Cycle 1%. 3. PW = 100 ms, 1 shot. 4. AC voltage for 1 minute at T A = 25 °C, RH = 60 % between input and output. PS7211-2A OUTLINE DIMENSIONS (Units in mm) 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOSFET 6. MOSFET 7. MOSFET 8. MOSFET SYMBOLS PARAMETERS UNITS MIN TYP MAX I F LED Operating Current mA 2 10 20 VF LED Off Voltage V 0 0.5 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) PART NUMBER PS7211-2A PART NUMBER PACKAGE PACKING STYLE PS7211-2A 8 PIN SOP Magazine case 45 pcs PS7211-2A-F3 Embossed tape 1500 pcs/reel PS7211-2A-F4

ORDERING INFORMATION

9.08±0.5 1234 876 5 2.05 2.54 0.5 0.5 ± 0.3 7.0±0.3 4.4 0.15 +0.10 -0.05 0.4±0.3 +0.08 -0.05 +0.10 -0.05 +0.08 -0.05 0.40 TOP VIEW

TYPICAL PERFORMANCE CURVES (TA = 25°C unless otherwise specified) 100 02 5-25 50 75 80 100 150 100 02 5-25 50 75 80 100 1.6 1.4 1.2 1.0 0.8 02 5-25 50 75 100 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 10-9 10-8 10-5 10-4 10-6 10-7 10-3 0 20 60 80 100 12040 25°C TA = 80°C -200 -1.0 -0.5 0.5 1.0 -100 100 200 IF = 10 mA MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) Maximum Forward Current, I F (mA) Maximum Forward Current, I F (mA) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE Ambient Temperature, TA (°C) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE Forward Voltage, V F (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE Applied Volltage, VD (V) Load Volltage, VL (V) LOAD CURRENT vs. LOAD VOLTAGE Load Current, I L (mA) Applied Volltage, VD (V) Output Capacitance, C out (pF) Off-state Leakage Current, I Loff (A) 100 125 0 20 40 80 125 100 f = 1 MHz

Normalized to 1.0 at TA = 25 °C IF = 10 mA IL = 10 mA 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 02 5 5 0 7 5 100 n = 50 pcs IF = 0 mA IL = 10 mA 1.5 2.0 2.5 1.0 0.5 0 51 0 2 0 3 0 25 VO = 5 V 0.4 0.5 0.3 0.2 0.1 0 51 0 2 0 3 0 25 VO = 5V n = 50 pcs IF = 10 mA VO = 5 V 0.040.02 n = 50 pcs IF = 10 mA VO = 5 V TYPICAL PERFORMANCE CURVES (TA = 25°C unless otherwise specified) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT Ambient Temperature, TA (°C) Normalized On-state Resistance, R on ( Number (pcs) On-state Resistance, Ron (Ω ) Forward Current, IF (mA) Forward Current, IF (mA) Turn-on Time, t on (ms) Turn-off Time, t off (ms) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION Turn-on Time, ton (ms) Turn-off Time, toff (ms) Number (pcs)Number (pcs)

Normalized to 1.0 at TA = 25 °C IF = 10 mA VO = 5 V 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 02 5 5 0 7 5 100 Normalized to 1.0 at TA = 25 °C IF = 10 mA VO = 5 V 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 02 5 5 0 7 5 100 TYPICAL PERFORMANCE CURVES (TA = 25°C unless otherwise specified) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Ambient Temperature, TA (°C) Normalized Turn-on Time, t on (ms) Normalized Turn-off Time, t off (ms) Ambient Temperature, TA (°C) 2.0 ± 0.1 1.55 ± 0.1 12.0 ± 0.1 7.6 ± 0.1 2.8 ± 0.1 0.3 7.5 ± 0.1 10.45 ± 0.1 1.75 ± 0.1 16.0 ± 0.3 2.0 ± 0.5 16.4 +2.0 -0.0 φ21.0 ± 0.8 φ330 φ100±5.0 φ13.0±1.0 2.5 PS7211-2A-F3 PS7211-2A-F4 TAPING SPECIFICATIONS (Units in mm) TAPE DIRECTION REEL OUTLINE and DIMENSIONS TAPE OUTLINE AND DIMENSIONS

EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 Internet: http://WWW.CEL.COM 10/08/2001 DATA SU BJECT TO CHANGE WITHOUT NOTICE RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

• Peak reflow temperature 235 °C or below (package surface temperature)
• Time of temperature higher than 210 °C 30 seconds or less
• Number of reflows Two
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (2) Dip soldering
• Temperature 260 °C or below (molten solder temperature)
• Time 10 seconds or less
• Number of times One
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions
• Fluxes Avoid removing the residual flux with freon-based cleaning solvent.
• Avoid shorting between portion of frame and leads. Time (s) Package Surface Temperature T (˚C) 100 to 160 ˚C 60 to 120 s (preheating) (heating) to 10 s to 30 s 235 ˚C (peak temperature) 210 ˚C * : Portion of frame * * Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.