PS720C-1A CEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
4-PIN SOP, 0.1 Ω LOW ON-STATE RESISTANCE
60 V BREAK DOWN VOLTAGE
1.25 A CONTINUOUS LOAD CURRENT
1-ch Optical Coupled MOS FET Document No. PN10778EJ02V0DS (2nd edition) Date Published January 2010 NS −NEPOC Series−
DESCRIPTION
The PS720C-1A is a low on-state resi stance solid state relay containing a GaAs LED on the input side and MOS FETs on the output side. It is suitable for PLC, etc., because of its large continuous load current and low on-state resistance.
FEATURES
- Low on-state resistance (R on = 0.1 Ω TYP.)
- Large continuous load current (I L = 1.25 A) PIN CONNECTION (Top View)• High-speed switching time (t on = 2 ms TYP., toff = 0.05 ms TYP.)
- 1 channel type (1 a output) 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET
- Designed for AC/DC switching line changer
- Small and thin package (4-pin SOP, Height = 2.1 mm)
- High isolation voltage (BV = 1 500 Vr.m.s.)
- Low offset voltage • Ordering number of taping pr oduct: PS720C-1A-E3: 900 pcs/reel : PS720C-1A-F3: 3 500 pcs/reel
- Pb-Free product • Safety standards
- UL approved: No. E72422
APPLICATIONS
- Measurement equipment
- FA equipment The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
PACKAGE DIMENSIONS (UNIT: mm) 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 2.54 4.0±0.5 0.05+0.08 –0.05 2.05+0.08 –0.05 0.40+0.10 –0.05 0.25 M 1 2 4 3 PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 5 mm Outer Creepage Distance 5 mm Isolation Distance 0.4 mm MARKING EXAMPLE (LASER MARKING) No.1 pin Mark Assembly Lot Type Number PS720C-1A *1 Bar : Pb-Free Remark Applicable type numbers are underlined below N03 1 Week Assembled Year Assembled (Last 1 Digit) Rank Code 0C-A N031 Data Sheet PN10778EJ02V0DS 2
ORDERING INFORMATION Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number PS720C-1A PS720C-1A-A Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS720C-1A PS720C-1A-E3 PS720C-1A-E3-A Embossed Tape 900 pcs/reel (UL approved) PS720C-1A-F3 PS720C-1A-F3-A Embossed Tape 3 500 pcs/reel *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V Power Dissipation PD 50 mW Peak Forward Current I FP 1 A MOS FET Break Down Voltage VL 60 V Continuous Load Current IL 1.25 A Pulse Load Current (AC/DC Connection) ILP 2.5 A Power Dissipation PD 300 mW Isolation Voltage BV 1 500 Vr.m.s. Total Power Dissipation PT 350 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +100 °C *1 PW = 100 μs, Duty Cycle = 1% *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at T A = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. Data Sheet PN10778EJ02V0DS 3
RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 5 10 20 mA LED Off Current IF 0.1 mA ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF I F = 5 mA 1.1 1.4 V Reverse Current IR V R = 5 V 5 μA MOS FET Off-state Leakage Current ILoff V D = 60 V 10 1 000 nA Output Capacitance Cout V D = 0 V, f = 1 MHz 230 pF Coupled LED On-state Current IFon I L = 1.25 A 4 mA On-state Resistance Ron I F = 10 mA, IL = 1.25 A 0.1 0.19 Ω Turn-on Time *1, 2 t on I F = 10 mA, VO = 5 V, RL = 500 Ω, 2 10 ms Turn-off Time *1, 2 t off PW ≥ 10 ms 0.05 0.5 Isolation Resistance RI-O V I-O = 1.0 kVDC 10 Ω Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.5 pF *1 Test Circuit for Switching Time VL R IF LRin Pulse Input Input monitor monitor VO ton toff 10 % 90 % Input Output 50 % VO = 5 V *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. Data Sheet PN10778EJ02V0DS 4
TAPING SPECIFICATIONS (in millimeters) PS720C-1A-E3 Tape Direction Outline and Dimensions (Tape) 1.55±0.1 2.0±0.05 4.0±0.1 1.75±0.1 4.6±0.1 2.9 MAX. 0.38.0±0.1 2.4±0.1 1.5+0.1 7.4±0.1 5.5±0.05 12.0±0.2 Outline and Dimensions (Reel) Packing: 900 pcs/reel 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 180+0 φ –1.5 –060φ Data Sheet PN10778EJ02V0DS 5
Outline and Dimensions (Tape) 1.55±0.1 2.0±0.05 4.0±0.1 1.75±0.1 4.6±0.1 2.9 MAX. 0.38.0±0.1 2.4±0.1 1.5+0.1 7.4±0.1 5.5±0.05 12.0±0.2 Outline and Dimensions (Reel) Packing: 3 500 pcs/reel 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 330±2.0φ 100±1.0φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 13.0±0.2φ Data Sheet PN10778EJ02V0DS 6
RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering
- Peak reflow temperature 260°C or below (package surface temperature)
- Time of peak reflow temperature 10 seconds or less
- Time of temperature higher than 220°C 60 seconds or less
- Time to preheat temperature from 120 to 180°C 120± 30 s
- Number of reflows Three
- Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 220°C Package Surface Temperature T (°C) Time (s) (heating) to 10 s to 60 s 260°C MAX. Recommended Temperature Profile of Infrared Reflow 120±30 s (preheating) 180°C 120°C (2) Wave soldering
- Temperature 260°C or below (molten solder temperature)
- Time 10 seconds or less
- Preheating conditions 120 °C or below (package surface temperature)
- Number of times One
- Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron
- Peak temperature (lead part temperature) 350 °C or below
- Time (each pins) 3 seconds or less
- Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. (4) Cautions
- Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10778EJ02V0DS 7
- Protect against static electricity when handling. 2. Avoid storage at a high te mperature and high humidity. Data Sheet PN10778EJ02V0DS 8
Data Sheet PN10778EJ02V0DS 9 PS720C-1A The information in this document is current as of January, 2010. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E0904E (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific":
Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.
- Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.
- Do not burn, destroy, cut, crush, or chemically dissolve the product.
- Do not lick the product or in any way allow it to enter the mouth.