DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

˙ MODEL NUMBER DESIGNATION P S 6 - 1 0 2 V - N A R Series name Pressure port Output Switch output interface Rated pressure range Pressure reference 102ɿ100 kPa 103ɿ1000 kPa GɿGauge VɿGauge (Vacuum) RɿR1/8 male screw with M5 female screw MɿM5 female screw Aɿ1 SW output and adjustable hysteresis + Analog output Wɿ2 SW outputs NɿNPN open collector PɿPNP open collector PRESSURE SWITCHES WITH GAUGE PS6 Part name Material Pressure port Housing “O” ring Sensor module board Protection panel Main panel POM (Polyoxymethylene) PC (Polycarbonate) Fluoro-rubber ——— PET (Polyethyleneterephthalate) INTERNAL STRUCTURE (M5 female screw) /g79/g3Solidstate pressure switch with no mechanical moving parts /g79/g32 types of pressure ports are available /g79/g3Open collector output of either NPN or PNP is available /g79/g3Analog output type available ˙FEATURES ˙ LIST OF MODEL NUMBERS Pressure port R 1/8 male screw M 5 female screw Outputs Adjustable hysteresis switch output + Analog output NPN open collector output PNP open collector output NPN open collector output PNP open collector output NPN open collector output PNP open collector output NPN open collector output PNP open collector output Switch outputs (2 points) Adjustable hysteresis switch output + Analog output Switch outputs (2 points) Switch output 102V 102G 103G 0 ~ −100 kPa 0 ~ 100 kPa 0 ~ 1000 kPa ɹɹɹPS6-102V-NARɹɹɹɹɹɹPS6-102G-NARɹɹɹɹɹPS6-103G-NAR ɹɹɹPS6-102V-PARɹɹɹɹɹɹPS6-102G-PARɹPS6-103G-PAR ɹɹɹPS6-102V-NWRɹɹɹɹɹPS6-102G-NWRɹPS6-103G-NWR ɹɹɹPS6-102V-PWRɹɹɹɹɹɹPS6-102G-PWRɹPS6-103G-PWR ɹɹɹPS6-102V-NAMɹɹɹɹɹɹPS6-102G-NAM PS6-103G-NAM ɹɹɹPS6-102V-PAMɹɹɹɹɹɹPS6-102G-PAMɹPS6-103G-PAM ɹɹɹPS6-102V-NWMɹɹɹɹɹɹPS6-102G-NWMɹPS6-103G-NWM ɹɹɹPS6-102V-PWMɹɹɹɹɹɹPS6-102G-PWMɹPS6-103G-PWM ˞Verify the above model numbers when placing orders. marking Compatible with EMC directive

PRESSURE SWITCHES WITH GAUGE General specificationsDisplay Power Item Model number PS6 102V 102G 103G ˙STANDARD SPECIFICATIONS Pressure reference Gauge Non-corrosive gases 0 ~ −100 0 ~ 100 0 ~ 1000 200 200 1500 500 500 2000 −10 ~ 60 0 ~ 50 35 ~ 85ʢNo condensationʣ −20 ~ 70ʢAtmospheric pressure, humidity 65 %RH maximumʣ Approx. ʢIncluding cableʣ 12 ~ 24 V ± 10 %ʢIncluding ripple percentageʣ 100 (500 V DC)

500 V AC, 60 sʢLeakage current 1 mA maximumʣ

R 1/8ʢ.Female screwʣor . 2-digit LED −0 ~ −99 kPa 0 ~ 99 kPa .0 ~ .99 MPa ± 3 %F.S. ± 2counts 1 count Pressure medium Rated pressure range kPa Maximum pressure kPa Break-down pressure kPa Operating temp. range °C Compensated temp. range °C Operating humidity %RH Storage temp. °C Net weight g Supply voltage V DC Consumption current mA max. Insulation resistance M Ω min. Dielectric strength Pressure port Display element Rated display range Display accuracy ʙ ˆ ʢReference temp. 25 °Cʣ Resolution /g79/g3Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 12 V DC. Switch outputAnalog output Approx. 0 ~ 15 % of the set value (W type only 2 % F.S. maximum)

30 V 80 mA maximum

0.8 (NPN), 1.2 (PNP) 0 ~ 100 of rated pressure ˞ Red LED ON (W type only : SW1 Red, SW2 Green) ± 3 Approx. 2 1 ~ 5 1 ± 0.1 4 ± 0.1 ʢLoad resistance 5 kΩ minmumʣ Adjustable range Switching capacity Residual voltage V maximum Display Accuracy ʙ ˆ '4 ʢReference temp. 25 °Cʣ Switch hysteresis Response ms Output voltage V Zero voltage V Span voltage V Output current mA maximum ˞ɿPlease set adjusting torque at 30 mN·m maximum. ˞ɿThe actual setting range adjustable by VR has a little overrunning margin beyond the rated display of 0 through 99. This could cause the setting value of VR may be under “0” or over “99”. Open collector output (NPN or PNP) Adjustable by VR 1 or 2No. of outputs Output interface Setting method

Set valueʵ100 kPa Rated pressureBarometic pressure Barometic pressure ON OFF ON FGLED Pressure indication A.Output ̡̙̚ɹIndicator1 Common Sensor Power B Main circuit S.Output Load Pressure FGLED Pressure indication A.Output Common S.Output Power B Load Pressure Main circuitSensor ̡̙̚ɹIndicator1 FG 1 ̡̙̚ɹIndicator2 Load S.Output2 Common Sensor Power B Main circuit S.Output1 Load Pressure FG 2 ̡̙̚ɹIndicator1 Common S.Output2 Power B LoadLoad Pressure Main circuit Sensor S.Output1 /g79/g3NAM, NAR (NPN/Adjustable hysteresis switch) /g79/g3PS6-102V /g79/g3PS6- ˎˎˎG /g79/g3PAM, PAR (PNP/Adjustable hysteresis switch) PS6 PRESSURE SWITCHES WITH GAUGE ˙ CIRCUIT DIAGRAMS ˙ ENVIRONMENTAL CHARACTERISTICS Test item Test conditions Permissible change Vibration 10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s 2, 3 directions for 2 hours each 196 m/s2, 3 directions for 3 times each 40 °C, 90 ~ 95 %RH, 240 hrs. 0 ~ Rated pressure, 106 cycles EMI : EN55011: 2007, A2 : 2007 Group 1, class B/g253 EMS : EN61326-1 : 2006 Table 2 Pressure indication, switch operating pressure and analog output variation : ± 2 %F.S., maximum each after test Pressure indication, switch operating pressure and analog output variation : ± 5 %F.S., maximum during test Shock Moisture resistance Pressure cycling EMC ˙ SWITCHING OPERATION ˔The switch turns on at the set pressure and turns off at the set pressure minus the hysteresis. ˞ ˎ A ˎ is adjustable hysteresis type. /g79/g3NWM, NWR (NPN/2 switch outputs) /g79/g3PWM, PWR (PNP/2 switch outputs)

˙OUTLINE DIMENTIONS Unless otherwise specified, tolerance : ± 0.5 (Unit: mm) PS6 PRESSURE SWITCHES WITH GAUGE Polyacetal Polycarbonate Mounting hole 2 – 3.3φ 4-core shielded cable L = 1500 50 AWG26 ULNo.2844 ( 3.8)φ 52.5 8.5 4.5 R1/8 Pressure port M5 depth 5 Hysteresis setting VR ˞Used to set the switch 2 for two-switch output model Recommended adjusting torque 30 mN·m maximumDisplay selector switch (ME/SW) ˞For two-output switch (ME/S1/S2) Recommended adjusting torque 25 mN·m maximum Switch status LED 1 (Red) Switch status LED 2 (Green) ˞Only for two-switch output model Pressure indication Pressure setting VR ˞Used to set the switch 1 for two-output type Recommended adjusting torque 30 mN·m maximum Polyacetal Polycarbonate Mounting hole 2 – 3.3φ 52.5 4.5 Pressure port M5 Depth 2 – M3 Depth 4.5 Pressure indication Switch status LED 1 (Red) Switch status LED 2 (Green) ˞Only for two-switch output model Display selector switch (ME/SW) ˞For two-output switch (ME/S1/S2) Recommended adjusting torque 25 mN·m maximum Hysteresis setting VR ˞Used to set the switch 2 for two-switch output model Recommended adjusting torque 30 mN·m maximum Pressure setting VR ˞Used to set the switch 1 for two-switch output model Recommended adjusting torque 30 mN·m maximum 4-core shielded cable L = 1500 50 AWG26 ULNo.2844 ( 3.8)φ /g79/g3R type (NAR, PAR, NWR, PWR) /g79/g3M type (NAM, PAM, NWM, PWM) Wire color Brown Black White Blue Shield Connection Power B Switch output Analog output Common N.C. PS6 (NAM,NAR, PAM, PAR) Wire color Brown Black White Blue Shield Connection Power B Switch output 1 Switch output 2 Common N.C. PS6 (NWM, NWR, PWM, PWR)