PS30_16 COPAL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PRESSURE SWITCHES WITH GAUGE PS30 ■ MODEL NUMBER DESIGNATION P S 3 0 - 1 0 2 R - N Series name Rated pressure range 102R：−100 ~ 100 kPa 103R：−0.1 MPa ~ 1.00 MPa Switch output interface N：NPN open collector P：PNP open collector ※Please refer to the LIST OF MODEL NUMBERS when placing orders. ■ LIST OF MODEL NUMBERS Switch output interface Rated pressure range Pressure reference −100 ~ 100 kPa −100 ~ 1000 kPa PS30-102R-N PS30-103R-N PS30-102R-P PS30-103R-P NPN PNP Part name Material Base Housing Panel sheet “O” ring Pressure port Pressure transducer1 P-2000 Fluoro-rubber Brass (Ni-plated) ABS (Acrylonitrile-butadiene-styrene) Polyester INTERNAL STRUCTURE

  • Optimum for pneumatic equipment and semiconductor manufacturing equipment
  • Larger size display and high luminance LED for best visibility
  • Eight switch output modes
  • Low consumption by nondisplay mode ■FEATURES ϚʔΩϯά marking Compatible with EMC directive

± 2 %F.S. maximum after test General specificationsDisplay PowerSwitch output Item Model number 102R 103R ■STANDARD SPECIFICATIONS Pressure reference Gauge Non-corrosive gases − 100 ~ 100 − 100 ~ 1000 200 1500 500 2000 − 10 ~ 50 0 ~ 50 35 ~ 85（No condensation） − 20 ~ 70（Atmospheric pressure, humidity 65 %RH maximum） Approx. 60（Including 1.5 m cable） 12 ~ 24 V ± 10 %（Including ripple voltage） 100 (DC 500 V)

500 V AC, 60 s（Leakage current 1 mA maximum）

M5 female screw, “O” ring groove (P8) LED（2 and 1/2 digit） ± 1 %F.S. 1 count Open collector output (NPN or PNP)

30 V DC 100 mA maximum Short-circuit protection

1.2 V (NPN), 2.2 V (PNP) Output 1 (SW1), Output 2 (SW2) Light on when output is ON. 0 ~ 30 counts（Adjustable） ± 0.3 maximum Approx 5, 25, 250（Adjustable） Pressure medium Rated pressure range kPa Maximum pressure kPa Break-down pressure kPa Operating temp. range °C Compensated temp. range °C Operating humidity %RH Storage temp. °C Net weight g Supply voltage V DC Consumption current mA maximum Thermal error Insulation resistance MΩminimum Dielectric strength Pressure port Display element Rated display range kPa MPa Display accuracy Resolution No. of outputs Output interface Switching capacity Residual voltage V maximum Display Switch hysteresis Repeatability %F.S. Response ms

  • Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 24 V DC. PS30 PRESSURE SWITCHES WITH GAUGE ※ １ Change in the pressure indication, switch operating points. ■ENVIRONMENTAL CHARACTERISTICS Test item Test conditions Vibration 10 ~ 500 Hz, 98.1 m/s2 or 1.5 mm P-P , 3 directions for 2 hours each 490 m/s2, 3 directions for 3 times each 0 ~ Rated pressure、106 cycles 40 °C, 90 ~ 95 %RH, 240 hrs. EMI : EN55011: 2007, A2 : 2007 Group 1, class B EMS : EN61326-1 : 2006 Table 2 Switch operating pressure : ± 5 %F.S., maximum during tset Shock Pressure cycling Moisture resistance EMC

PRESSURE SWITCHES WITH GAUGE ■ OUTLINE DIMENSIONS Unless otherwise specified, tolerance : ± 0.5 (Unit : mm) 4-core cable ( 4)φ Housing ABS Base ABS SW1 PS30 □31

20 Depth 6

Pressure port (Brass, Ni-plated) M5 female depth 5 “O” ring groove (P8) 2–M 3 □30SW2 kPa L = 1500 100 AWG26 ULNo.2844 ■ INTERNAL ELECTRICAL SCHEMATICS ■ SELECTION OF DISPLAY MULTIPLIER ■ SWITCH OUTPUT MODE

  • NPN ● PNP Please refer to the right list. (Note) Diagonal column : No unit can be selected due to resolution and number of digits. ×1 −100 ~ 100 ×1 −0.10 ~ 1.00 ×0.75 −75 ~ 75 102R 103R Display multiplier Display range Display multiplier Display range Output Mode OperationSelection number SW 1 SW 2 Separate Setting 1 Note 1 Lower limit : Setting 1 Upper limit : Setting 1 Note 2 Setting 1 Note 1 Lower limit : Setting 1 Upper limit : Setting 1 Note 2 Window comparator Separate Window comparator HI ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ LO A B HI LO A B Separate mode Window comparator mode （HI operation） （LO operation） （A operation） （B operation） P1: SW1 P2: SW2 P1 P2 P1 P2 OFF ON ON ON ON -Pr OFF OFF OFF Pr -Pr Pr -Pr Pr H H P1: SW1 P2: SW2 OFF ON -Pr Pr H H H H H H P1：Setting 1、P2：Setting 2 H：Switch hysteresis P1≦P2 or P1≧P2 P1≦P2+2H (Note 1) In the Separte Mode, setting 1 corresponds to SW1, and Setting 2 corresponds to SW2. (Note 2) In the Window Comparator Mode, the minimum value for SW1 and SW2 corresponds to Setting 1 and the maximum value corresponds to Settng 2. Wire color Brown Black White Blue Connection Power B Switch output 1 Switch output 2 Common PS30 Pressure indication LED 1 ＬＥＤ Indicator2 Load S.Output2 Common Sensor Power B Main circuit S.Output1 Load Pressure LED Pressure indication 2 ＬＥＤ Indicator1 Common S.Output2 S.Output1 Power B LoadLoad Pressure Main circuitSensor

PRESSURE SWITCHES WITH GAUGE ■HOW TO MOUNT OPTIONAL ACCESSORIES (Sold separately) □31 20 4 – φ3.3 2 – Rc1/8 Pressure port Material : Zink die-casting / nickel plate Material：SUS304 t = 1.5 396 20φ4.2 x 5.2 Slot φ4.2 2-φ3.5 18Fixed Body（PS30） “O” ring（P8） Port block M3×10 Male screw (2 pcs.) SW1 PS30 SW2 kPa 42.6） （5.7） 4.5 23.5 40 36 +0.5 36 +0.5 Panel cut dimension (Panel board thickness : 1 ~ 3.6 mm) Panel holder cover Panel holder Body（PS30） Mounting panel Panel stopper 2 pcs. Holder cover set Panel holder set

  • Port block ●How to mount port block
  • Rear panel mounting bracket Material：SUS304 t = 1.5 2-φ3.5 20 φ4.2 φ4.2 x 5.2 Slot Fixed
  • Panel mounting bracket
  • Panel mounting bracket (Option)
  • How to mount panel holder cover set Description Rear panel bracket setACPG-001 Rear panel bracket and M3 x 4 male screw (2 pcs.) Panel bracket and M3 x 4 male screw (2 pcs.) Panel holder cover Panel holder Panel stopper (2 pcs.) Panel holder cover Panel holder Port block “O” ring (P8) M3 x 10 Male screw 2 pcs. Seal screw 1 pc. ACPG-002 ACPG-003 ACPG-004 ACPG-005 Panel bracket set Panel holder set Holder cover set (For protecting operating panel) Port block Name Contents