UTO2025 TELEDYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

  • Frequency Range: 100 to

2000 MHz

  • High Dynamic Range
  • Medium Gain: 11.0 dB (Typ)
  • Low Noise: 3.0 dB (Typ)
  • High Power: +27 dBm (Typ)
  • Temperature Compensated

Applications

  • Power AMP Driver
  • High Intercept Requirements

Description

The 2025 Series is a wideband, high-power GaAs FET RF ampli- fier. The combination of high output power and low noise figure provide a unit with very high dynamic range. Active bias and resistive feedback provide for stability over temperature and bias voltage variations. Input/ output blocking capacitors couple the RF through the amplifier, while a low VSWR is maintained through inductive tuning. The

2025 Seri es amplifiers are avail-

able in either the TO-8 hermetic case or connectored TC-1A package. UTO/UTC 2025 Series Pin Configuration UTO—TO-8T RF IN RFOUT UTC—TC-1A GROUND CASE GROUNDV + RFOUTRFIN Schematic Maximum Ratings Parameter Maximum DC Voltage +17 Volts Continuous RF Input Power +19 dBm Operating Case Temperature –55 to +100°C Storage Temperature –62 to +150°C “R” Series Burn-In Temperature +100°C Thermal Characteristics1 θJC 36°C/W Active Transistor Power Dissipation 1.28 W Junction Temperature Above Case Temperature 46 °C MTBF (MIL-HDBK-217E, AUF @ 90°C) 217,400 Hrs. Weight: (typical) UTO—2.1 grams; UTC—21.5 grams RFOUT RFIN

(Measured in 50 Ω system @ +15 VDC nominal unless otherwise noted) Symbol UnitTC = –55 to +85°C 100-2000 9.0 ±1.0 5.5 +24.0 2.2:1 2.2:1 +32.0 MHz dB dB dB dBm dBm dBm dBm mA T C = 0 to 50°C Guaranteed Specifications Typical TC = 25°C 100-2000 11.0 ± 0.3 3.0 +27.0 1.8:1 1.6:1 +37.0 +47.0 +53.0 175 100-2000 9.5 ± 1.0 4.5 +25.0 2.0:1 2.0:1 +33.0 Characteristic Frequency Range Small Signal Gain (Min.) Gain Flatness (Max.) Noise Figure (Max.) Power Output @ +1 dB Comp. (Min.) Input VSWR (Max.) Output VSWR (Max.) Two Tone 3rd Order Intercept Point Two Tone 2nd Order Intercept Point One Tone 2nd Harmonic Intercept Point DC Current BW GP NF P 1dB IP IP2 HP2 ID Typical Performance Over Temperature (@ +15 VDC unless otherwise noted) Key: +25°C +85°C -55°C Gain, dB 100 Gain Frequency, MHz 500 1700 2100 Noise Figure, dB Frequency, MHz Noise Figure 900 1300 100 500 1700 2100900 1300 Power Output @ 1 dB Gain Compression, dBm Power Output Frequency, MHz VSWR Input VSWR Frequency, MHz VSWR Output VSWR Frequency, MHz 2.0 1.0 1.75 IP3, dBm Third-Order Intercept Point Frequency, MHz Second-Order Intercept Point Frequency, MHz Second-Harmonic Intercept Point Frequency, MHz 4055IP2, dBm HP 2, dBm 100 900 500 1300 1.5 1.25 2.0 1.0 1.75 1.5 1.25 1700 2100 100 900 500 1300 1700 2100 100 900500 1300 1700 2100 100 900 500 1300 1700 2100 100 900500 1300 1700 2100 100 900 500 1300 1700 2100

Automatic Network Analyzer Measurements (Typical production unit @ +25 °C ambient) Bias = 15.00 Volts Current = 174.00 mAS-Parameters FREQ GPDEL PHASE GHz Mag Ang dB Ang dB Ang Mag Ang K ns DEG LINEARIZATION RANGE: .10 to 2.00 GHz S11 S21 S12 S22

UTO – 509R Screening Option Blank = No Screening R = R-Series Screening For more information on R-Series screening, see Reliability Screening, Pub. 5963-3240E. Model Number Prefix UTO- UTM- PPA- Model Number UTC – 509-1 Connector Option For TC-1 case the only connector option available is the -1. The -1 option consists of a SMA Female connector on both the input and output (see note). Model Number Prefix UTC- Model Number Note: R-Series screening is not available in the TC-1 case as the case is non-hermetic.

.031 .031 .50 DIA .450 DIA MAX .200 .017 0.185 ±0.015 +.002 - 001 .150 TYP .300 TYP GROUND CASE GROUND V .150 TYP APPROXIMATE WEIGHT 2.1 GRAMS +RF IN RF OUT GLASS RING .060 DIA TYP (3X) NOTES (UNLESS OTHERWISE SPECIFIED): 1. DIMENSIONS ARE SPECIFIED IN INCHES 2. TOLERANCES: xx ± .02 xxx ± .010

.350 .890 .460 .310 DC INPUT .38 (2) PL .24 .19SMA JACK (FEMALE) (2) PL .180 .640 .905 .095 .250 .570 2-56 UNC-2B x .15 DEEP THREADED INSERT (4) PL .460 .310 .350 1.000 .820 PRODUCT MARKING AREA TYPICAL WEIGHT WITH CONNECTORS = 21.5 GRAMS RF .100 V + IN RF OUT NOTES: 1. THE TC-1 CASE IS A NON-HERMETIC CASE. 2. THE ONLY CONNECTOR OPTION AVAILABLE FOR THE TC-1 CASE IS THE –1, SMA FEMALE CONNECTORS AT BOTH INPUT AND OUTPUT PORTS. AGC (IF REQUIRED) .890 .500 NOTES (UNLESS OTHERWISE SPECIFIED): 1. DIMENSIONS ARE SPECIFIED IN INCHES 2. TOLERANCES: xx ± .02 xxx ± .010 Contact Teledyne Microwave Solutions: 650-691-9800 650-962-6845 fax Check for updates: www.teledynemicrowave.com