PN8016 CHIPOWN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 11
Technical content
Features
■ Internal 800V avalanche-rugged smart power VDMOSFET ■ Internal HV Start-up Circuit ■ Supporting Buck, Buck-Boost and Flyback topologies ■ Variable Output Voltage 3.3V~18V adjusted by FB resistors ■ Semi enclosed steady output current 300mA @230VAC,5V ■ Frequency modulation for low EMI ■ Excellent constant voltage regulation and High efficiency ■ Excellent Protection Coverage: Over Load Protection（OLP） Over Temperature Protection（OTP） Under Voltage Lockout（UVLO）
Applications
■ non-isolated assistant power supply ■ Household appliance ■ S m a r t H o m e ■ LED Package/Order Information Order Code Package PN8016SSC-R1B SOP-7 Typical Circuit
www .chipown.com © 2018 W uxi Chipown Microelectronics Limited R ev .1809 Sept. -2018 2 / 11 Pin Definitions Pin Name Pin Number Pin Function Description VDD 1 VDD supply FB 2 Output voltage feedback SW 3 Drain of the internal MOSFET GND 4、5、6、7 Ground Typical Power Part number Input Voltage Steady output power (1) Peak Power(2) PN8016 85-265 V AC 1.5W(5V300mA) 1.5W(5V400mA) Note: 1. Maximum output power in a semi enclosed design meas ured at 75°C ambient temperature, Duration:2 hours 2. Peak power in a semi enclosed design measured at 75°C ambient temperature, Duration:1 min Block Diagram
www .chipown.com © 2018 W uxi Chipown Microelectronics Limited R ev .1809 Sept. -2018 3 / 11 Absolute Maximum Ratings Lead Temperature (Soldering, 10Secs)……………...260 ℃ Package Thermal Resistance Rθ Note：1. Test standard: ESDA/JEDEC JDS-001-2014. 2. Air discharge to pins of PN8016 with ESD Generator, Enterprise internal standards, for reference only.
Electrical Characteristics
(TA = 25°C, VDD = 15 V , unless otherwise specified) PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNIT Power Section Drain Break-down voltage BVDSS I SW =250uA 750 820 V Off-state drain current I OFF V sw =500V 100 μA Drain-source on state resistance RDS(on) ISW = 400mA, TJ =25°C 10 Ω Start up threshold V SW_START VDD=VDDon – 1V 30 V Supply Voltage Section VDD start up threshold V DDon 12 13.5 15 V VDD under voltage shutdown threshold VDDoff 10 11 12 V VDD voltage Hysteresis V DDhys 2.5 V VDD clamp voltage V DDclamp 16 20 23 V Supply Current Section VDD charge current I DDch VDD=9V -2.5 mA Operating supply current I DD0 V FB=2V,VDD=15V 150 330 450 uA Off-state current I DD1 V FB=2V,VDD=11V 80 120 150 uA Operating supply current, with protection tripping IDDFAULT VDD＝15V 150 uA Current Sense Section Drain current limit I limit 490 540 590 mA Leading edge blanking time TLEB 300 ns Feedback Input Section Minimum turn OFF time T offmin 15 18 21 us Minimum turn ON time T onmax 10 13 16 us MOSFET feedback turn-on Reference Voltage VREF 2.45 2.5 2.55 V
www.chipown.com © 2018 Wuxi Chipown Microelectronics Limited Rev.1809 Sept.-2018 4 / 11 PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNIT OLP Reference Voltage V REF_OLP 1.55 1.7 1.85 V OLP delay Time T OLP 150 ms Thermal Shutdown Section OTP threshold T SD 135 150 °C OTP Protect Hysteresis T HYST 30 °C
www.chipown.com © 2018 Wuxi Chipown Microelectronics Limited Rev.1809 Sept.-2018 5 / 11 Typical Characteristics Plot -50 -25 0 25 50 75 100 125 150 30RDS( on ) (Ω) Junction Temperture( )℃ -50 -25 0 25 50 75 100 125 150 750 800 850 900 950BVDSS (V) Junction Temperture( )℃ (a) RDS(on) vs Tj ( b ) B V DSS vs Tj -50 -25 0 25 50 75 100 125 150 2.46 2.48 2.50 2.52 2.54VREF (V) Junction Temperture( )℃ -50 -25 0 25 50 75 100 125 150 20TOFFMIN (us) Junction Temperture( )℃ (c) VREF vs Tj ( d ) T offmin vs Tj -50 -25 0 25 50 75 100 125 150 12.0 12.5 13.0 13.5 14.0 14.5 15.0VDDON (V) Junction Temperture( )℃ -50 -25 0 25 50 75 100 125 150 10.0 10.5 11.0 11.5 12.0VDDOFF (V) Junction Temperture( )℃ (e) VDDon vs Tj (f) V DDoff vs Tj
www.chipown.com © 2018 Wuxi Chipown Microelectronics Limited Rev.1809 Sept.-2018 7 / 11 Detection(OLD),VDD Under-Voltage Lockout (UVLO).And all these protections have self-recovery mode. OLP----If the FB pin voltage remains in lower than 1.7V for more than 150ms, the IC will self-restart. OTP----If the inner junc tion temperature exceeds 150℃,the IC will shut down switching, until the junction temperature falls to 120℃. OLD----If the FB pin voltage is lower than 100mV after soft-start up, the IC will self-restart. UVLO----If VDD pin Voltage drops below 11V, the internal high-voltage current source returns to supply 2.5mA current to charge the external VDD capacitor until VDD rises to V DDon. Otherwise, self-restart time can be changed by VDD capacitor. The larger the capacitor, the longer the self-restart time is.
www .chipown.com © 2018 W uxi Chipown Microelectronics Limited R ev .1809 Sept. -2018 8 / 11 Typical Application 470uF/16V 4.7uF/400V 0.56mH (8*10mm) 4.7uF/400V Component Parameter and Layout Considerations: 1. For 2KV differential mode surge, a diode D1* 1N4007 is recommended. 2. The pad between Pin 2 (VDD) and Pin 3 (SW) is not recommended for SOP-7 package of PN8016.
www .chipown.com © 2018 W uxi Chipown Microelectronics Limited R ev .1809 Sept. -2018 9 / 11
Package Information
Min.(mm) Nom.(mm) Max.(mm) S i z e symbol Min.(mm) Nom.(mm) Max.(mm) A1 0.10 0.15 0.25 L1 1.04REF A2 1.25 1.40 1.65 L2 0.25BSC A3 0.50 0.60 0.70 R 0.07 — — b 0.38 — 0.51 R1 0.07 — — c1 0.17 0.20 0.23 θ1 15° 17° 19° D 4.80 4.90 5.00 θ2 11° 13° 15° E 5.80 6.00 6.20 θ3 15° 17° 19° E1 3.80 3.90 4.00 θ4 11° 13° 15° e 1.270(BSC) Top mark Package PN8016 YWWXXXXX SOP-7 Note: Y: Year Code; WW: Week Code; XXXXX: Internal Code Notes: 1. This drawing is subjected to change without notice. 2. Body dimensions do not include mold flash or protrusion.
www .chipown.com © 2018 W uxi Chipown Microelectronics Limited R ev .1809 Sept. -2018 10 / 11 Tape and Reel Information A (mm) T (mm) (mm) H (mm) ØC (mm) ØD (mm) d (mm) (mm) (mm) (mm) 330±1.0 +1/-0 12.4 +1/-0 100±0.5 12.00 +0.5/-0.2 17.70 ±0.40 2.00 +0.5/-0.2 6.60 ±0.1 5.2±0.1 1.9±0.1 W (mm) F (mm) (mm) (mm) (mm) (mm) ØD0 (mm) ØD1 (mm) Pin 1 Quadrant 12.00 ±0.1 5.50±0.1 1.75 ±0.10 4.00 ±0.10 8.0 ±0.1 2.0 ±0.1 1.5 +0.1/-0 1.55 ±0.05 UL Notes: 1. This drawing is subjected to change without notice. 2. All dimensions are nominal and in mm. 3. This drawing is not in scale and for reference only. Customer can contact Chipown sales representative for further details. 4. The number of flange openings depends on the reel size and assembly site. This drawing shows an example only.
www .chipown.com © 2018 W uxi Chipown Microelectronics Limited R ev .1809 Sept. -2018 11 / 11 Important Notice Wuxi Chipown Microelectronics Co. Ltd. reserves the right to make changes without further notice to any products or specifications herein. Wuxi Chipown Microelectronics Co. Ltd. does not assume any responsibility for use of any its products for any particular purpose, nor does Wuxi Chipown Microelectronics Co. Ltd assume any liability arising out of the application or use of any its products or circuits. Wuxi Chipown Microelectronics Co. Ltd does not convey any license under its patent rights or other rights nor the rights of others.