PM900 ARTESYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Voltage accuracy ±1.0%, max. Line regulation NL to FL ±0.02% Load regulation FL to NL, Single outputs ±0.04% FL to NL, Dual outputs ±0.05% Cross regulation Dual outputs ±0.5%, max (Voltage balance) Ripple and noise Single output 10mV pk-pk, typical, 20MHz BW 65mV pk-pk, max. Dual output 6mV pk-pk, typical, 35mV pk-pk, max. Transient recovery NL to FL, all outputs 10µs time to 0.1% of final FL to NL, single output 200µs value FL to NL, dual output 20µs Temperature coefficient Single output ±0.02%/°C Dual output ±0.01%/°C Current limit 130% to 180% Iout Short circuit protection See Note 4 Thermal limit INPUT SPECIFICATIONS Input voltage range See table on facing page Input filter See Note 3 Pi network EMC CHARACTERISTICS Conducted emissions EN55022, EN55011, FCC 15 Level B GENERAL SPECIFICATIONS Efficiency Single output 61%, min. Dual output 62%, min. Isolation voltage 500VDC, min. Switching frequency Fixed 20kHz, min. Case material UL94V-0 Non-conductive black plastic Weight 57g (2oz) MTBF 680,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient –25°C to +71°C Non-operating amb. –40°C to +125°C Case +95°C, max Derating None required Cooling Free-air convection cooled Relative humidity Non-condensing 20% to 95% RH Altitude Operating 10,000 feet max. Non operating 40,000 feet max. Vibration 5Hz to 500Hz 2.4G rms (approx.) PM900 SERIES Single and dual output [ 2 YEAR WARRANTY ]

  • Extremely tight line and load regulation
  • Short circuit protection
  • Pi input filter
  • Low ripple output current
  • Conducted noise EN55022, EN55011 level B
  • Linear topology for high output accuracy and regulation The PM900 Series of 5 and 6 Watt DC/DC converters are a broad line of high performance modules with many important features and specifications as standard. All models contain Pi-type input filters to minimise reflected ripple current. They are packaged in low profile 2.0 x 2.0 x 0.4 inch cases with standard and two alternate pin-outs designed for direct PC card mounting. The units also feature output current limiting, short-circuit protection and input/output isolation of 500VDC. Other specifications include: an efficiency of 65%; line regulation of ±0.02%; load regulation of ±0.04% for single output models and ±0.05% for dual output models; low ripple and noise (10mV pk-pk for single output models and 6mV pk-pk for dual output models); and an output voltage accuracy of ±1.0%. PM900 Series DC/DC converters are intended for a wide variety of general industrial applications, especially where low noise performance is required. SPECIFICATION All specifications are typical at nominal input, full load at 25 ° C unless otherwise stated PAGE 1 Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Ar tesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompa ny the sale of any such product(s) or information contained herein.

INPUT OUTPUT OUTPUT INPUT CURRENT REFLECTED REGULATION ALT. MODEL VOLTAGE VOLTAGE CURRENT NO LOAD FULL LOAD RIPPLE CURRENT (1) LINE LOAD PIN-OUT (2) NUMBER 5VDC 5VDC 1000mA 125mA 1.54A 54mA ±0.02% ±0.04% A, B PM901 5VDC 12VDC 470mA 140mA 1.73A 61mA ±0.02% ±0.04% PM903 5VDC 15VDC 400mA 150mA 1.84A 64mA ±0.02% ±0.04% PM904 5VDC ±12VDC ±230mA 130mA 1.65A 58mA ±0.02% ±0.05% A PM951 5VDC ±15VDC ±190mA 135mA 1.7A 60mA ±0.02% ±0.05% B PM952 12VDC 5VDC 1000mA 50mA 0.64A 22mA ±0.02% ±0.04% PM911 12VDC 12VDC 470mA 60mA 0.72A 26mA ±0.02% ±0.04% PM913 12VDC ±12VDC ±230mA 55mA 0.69A 24mA ±0.02% ±0.05% PM961 12VDC ±15VDC ±190mA 55mA 0.71A 25mA ±0.02% ±0.05% B PM962 24VDC 5VDC 1000mA 25mA 0.32A 22mA ±0.02% ±0.04% PM921 24VDC 12VDC 470mA 30mA 0.36A 25mA ±0.02% ±0.04% PM923 24VDC 15VDC 400mA 30mA 0.38A 27mA ±0.02% ±0.04% PM924 24VDC ±12VDC ±230mA 25mA 0.34A 24mA ±0.02% ±0.05% A PM971 24VDC ±15VDC ±190mA 30mA 0.35A 25mA ±0.02% ±0.05% B PM972 48VDC 5VDC 1000mA 13mA 0.16A 22mA ±0.02% ±0.04% PM941 48VDC ±12VDC ±230mA 14mA 0.17A 24mA ±0.02% ±0.05% PM991 ALL DIMENSIONS IN INCHES (mm) CASE G Standard Pin Configuration + OUT COM - OUT BOTTOM VIEW - IN + IN 0.04 (1.0) DIA 0.40 (10.2) 0.40 (10.2) 0.60 (15.2) 0.22 (5.6) MIN. 0.40 (10.2) MAX 0.60 (15.2) 2.00 (50.8) 0.80 (20.3) NO PIN* 0.90 (22.9) 2.00 (50.8) 0.20 (5.1) Notes 1 Figures are peak-to-peak.

2 Alternate pin-out versions, if available, are designated by the suffixes

shown. For example, model PM901 is available in two alternate pin-out versions, i.e. PM901A and PM901B. See case drawings below.

3 Fixed frequency design provides for easier input filtering and better noise

performance. 4 Short circuit protection is achieved using a thermal limit at 130°C max. An extended short circuit of >8 hours will affect the units reliability. * On single output models this pin is either not present or should not be connected. ALL DIMENSIONS IN INCHES (mm) 0.15 (3.8) MIN. 2.00 (50.8) 0.40 (10.2) MAX. 0.02 (0.5) DIA. 2.00 (50.8) 1.80 (45.7) 0.30 (7.5) - IN + IN + OUT - OUT COM/NC BOTTOM VIEW 0.20 (5.1) 0.10 (2.5) 0.15 (3.81) 0.15 (3.81) Alternate Pin Configuration - Suffix A 0.50 (12.7) 0.50 (12.7) + OUT - OUT BOTTOM VIEW + IN 0.04 (1.0) DIA. 0.85 (21.6) 0.15 (3.8) 0.40 (10.2) MAX.0.15 (3.8) 2.00 (50.8) 1.65 (41.9) 2.00 (50.8) COM/NC* - IN 0.22 (5.6) MIN 0.85 (21.6) 1.70 (43.2)0.175 (4.4) Alternate Pin Configuration-Suffix B ALL DIMENSIONS IN INCHES (mm) INPUT VOLTAGE 60% FL 80% FL 100% FL 5 to 6 Watt Nominal input DC/DC converters SPECIAL APPLICATION MODELS | 5-6W DC/DC PAGE 2http://www.artesyn.com DS_PM900_19980401.PDF