PM800 ARTESYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

[ 2 YEAR WARRANTY ]

  • Linear topology for low noise applications
  • Tight line and load regulation
  • Short circuit protection
  • Pi input filter
  • Six sided continuous shield
  • No derating The PM800 Series is a comprehensive line of four single output and five dual output DC/DC converters with output power from 10 to 12 Watts. These high performance modules offer excellent regulation with low ripple and noise, and are especially useful in applications where higher output power levels are needed in a compact module. A Pi input filter in all models minimizes reflected ripple current while also providing for input spike attenuation. Six sided continuous shielding, also standard, gives EMI/RFI suppression. All models feature output current limiting, short circuit protection and input/output isolation to 500VDC. Other specifications include: line regulation of ±0.02%; load regulation of ±0.05% for single output models and ±0.02% for dual output models; and an output voltage accuracy of ±3.0%. SPECIFICATION All specifications are typical at nominal input, full load at 25 ° C unless otherwise stated PAGE 1 GENERAL SPECIFICATIONS Efficiency 65% typical Isolation voltage 500VDC, min. Switching frequency 20kHz, min. Case material UL94V-0 Non-conductive black plastic Shielding connection Single output To negative output Dual output To output common Weight 227g (8oz) MTBF Single output 330,000 hours Dual output 233,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient –25°C to +71°C Case +90°C, max. Non-operating amb. –40°C to +125°C Derating None required Cooling Free-air convection cooled Relative humidity Non-condensing 20% to 95% RH OUTPUT SPECIFICATIONS Voltage accuracy ±3.0% Line regulation Line ±8.0% ±0.02% Load regulation NL to FL, single outputs ±0.05% NL to NL, dual outputs ±0.02% Cross regulation Balance - duals (max.) ±0.5% Ripple and noise Single output 0.7mV rms typical, 20MHz BW 50mV pk-pk max. Dual output 0.7mV rms typical, 35 mV pk-pk, max. Transient response Singles, NL to FL 300mV typ., 0.1µs Duals, FL to NL 400mV typ., 0.1µs Singles, NL to FL 50mV typ., 0.1µs Duals, FL to NL 50mV typ., 0.1µs Temperature coefficient Single output ±0.02%/°C, max. Dual output ±0.01%/°C, max. Short circuit protection Auto-restart, 130°C thermal max. 8 hours protection INPUT SPECIFICATIONS Input voltage range See table on facing page Input filter See Note 3 Pi network

VOLTAGE 60% FL 80% FL 100% FL 0.040(1.0) DIA. PINS 0.88 (22.4) 0.22 (MIN.) (5.6) 2.20 (55.9) – OUT+ OUT – IN+ IN 2.50 (63.5) NC 0.50 (12.7) 0.50 (12.7) 0.60 (15.2) 1.60 (40.6) 3.50 (88.9) 1.60 (40.6) INSERTS 4-40 THREAD 0.125 (3.2) DEEP 0.15 (3.8) 0.60 (15.2) 2.20 (55.9) – OUT+ OUT – IN+ IN 2.50 (63.5) COM 0.50 (12.7) 0.50 (12.7) 0.60 (15.2) 1.60 (40.6) 3.50 (88.9) 1.60 (40.6) INSERTS 4-40 THREAD 0.125 (3.2) DEEP 0.15 (3.8) 0.60 (15.2) ALL DIMENSIONS IN INCHES (mm) SINGLE OUTPUT MODELS DUAL OUTPUT MODELSCASE B1 REFLECTED RIPPLE CURRENT (1) Notes 1 Figures are peak-to-peak, max. 2 Load regulation measured from no load to full load.

3 Fixed frequency design provides for easier input filtering and better noise

performance. INPUT OUTPUT OUTPUT INPUT CURRENT REGULATION MODEL VOLTAGE VOLTAGE CURRENT NO LOAD FULL LOAD LINE LOAD (2) NUMBER 5VDC 5VDC 2000mA 250mA 3080mA 108mA ±0.02% ±0.05% PM801 5VDC 12VDC 940mA 278mA 3470mA 122mA ±0.02% ±0.05% PM803 12VDC ±12VDC ±525mA 115mA 1620mA 55mA ±0.02% ±0.02% PM861 12VDC ±15VDC ±412mA 110mA 1590mA 54mA ±0.02% ±0.02% PM862 24VDC 5VDC 2000mA 50mA 640mA 32mA ±0.02% ±0.05% PM821 24VDC ±12VDC ±525mA 55mA 780mA 39mA ±0.02% ±0.02% PM871 24VDC ±15VDC ±412mA 55mA 770mA 38mA ±0.02% ±0.02% PM872 48VDC 5VDC 2000mA 26mA 320mA 32mA ±0.02% ±0.05% PM841 48VDC ±12VDC ±525mA 27mA 390mA 39mA ±0.02% ±0.02% PM891 10 to 12 Watt Nominal input DC/DC converters SPECIAL APPLICATION MODELS | 10-12W DC/DC PAGE 2http://www.artesyn.com DS_PM800_19980401.PDF Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Ar tesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompa ny the sale of any such product(s) or information contained herein.