PM500CE ARTESYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Single, dual and triple output [ 2 YEAR WARRANTY ]

  • Encapsulated package
  • 1 to 10.5W units
  • 230VAC input (115VAC version, see PM500)
  • PCB mounting
  • Short circuit protection
  • EN55022, EN55011 conducted emissions level B
  • EN61000-4-2, -3, -4, -5, -6 immunity compliant
  • Meets EN60950 The PM500CE series is an encapsulated, board mountable linear AC/DC power module with the CE mark to demonstrate compliance with the Low Voltage Directive for European applications. The series has single, dual and triple output models with industry standard output configurations operating from an input voltage of 230VAC making the PM500CE series suitable for a wide range of low power PCB applications. The PM500CE series includes 1W to 10.5W modules. Each module has short circuit protection and the 5V outputs also have overvoltage protection. Conservative design and rating of these modules results in reliable operation and long life. The PM500CE design is a low emissions design with tightly regulated outputs making the series especially suitable for test, measurement and instrumentation equipment. SPECIFICATION All specifications are typical at nominal input, full load at 25 ° C unless otherwise stated PAGE 88 OUTPUT SPECIFICATIONS Voltage accuracy ±1.0% max. Voltage adjustability Yes Line regulation See table Load regulation See table Temperature coefficient ±0.02%/°C Overvoltage protection 5V outputs only 6.2V typical (See Note 4) Output power limit Typical 130% to 200% FL Short circuit protection Switch off/on 100% to 200% FL INPUT SPECIFICATIONS Input voltage range 230VAC ±10% Input frequency range (See Note 2) 47Hz to 400Hz Safety ground <3.5mA @ 50Hz leakage current EMC CHARACTERISTICS Conducted emissions EN55022 Level B Radiated emissions EN55022 Level B ESD air EN61000-4-2, level 3 Perf. criteria 1 ESD contact EN61000-4-2, level 4 Perf. criteria 1 Surge EN61000-4-5, level 3 Perf. criteria 1 Fast transients EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity EN61000-4-3, level 3 Perf. criteria 1 Conducted immunity EN61000-4-6, level 3 Perf. criteria 1 GENERAL SPECIFICATIONS Efficiency 40% typical Isolation voltage 3000VAC Isolation capacitance 50pF Approvals and (See Note 5) Meets EN60950 standards Case material UL94V-0 Non-conductive black plastic Weight Case B1 340g (12oz) Case B2 408g (14.4oz) Case B3 635g (22.4oz) MTBF (See Note 3) 710,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating amb. –25°C to +71°C Non-operating amb. –25°C to +85°C Derating, 50°C to 71°C 2.5%/°C Cooling Free-air convection cooled Relative Humidity Non-condensing 20% to 95% RH

1 Triple output models only: the 5V output common is isolated from the

±12VDC or ±15VDC common. 2 Some units should be derated for operation at 400Hz. Please contact the factory for details. factory for details.

4 Triple output models only: overvoltage protection is only available on the

5V outputs.

5 All models are only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product. ALL DIMENSIONS IN INCHES (mm) 1.62 (41.1) 0.040 (1.0) DIA. PINS B1 B2 B3 1.25 (31.8) 0.88 (22.4) 0.20 (5.1) MIN. SIDE VIEWCASE B DUAL OUTPUT MODELS 0.50 (12.7) - OUT COM + OUT 0.60 (15.2) AC AC 2.20 (55.9) 1.60 (40.6) 3.50 (88.9) 0.15 (3.8) 2.50 (63.5) 1.60 (40.6) 0.50 (12.7) 0.60 (15.2) INSERTS

4.40 THREAD

0.125 (3.2) DEEP 2.20 (55.9) COM COM + 5V 0.50 (12.7) 0.60 (15.2) AC AC 1.60 (40.6) 3.50 (88.9) 0.15 (3.8) 2.50 (63.5) 1.60 (40.6) 0.50 (12.7) 0.60 (15.2) INSERTS 0.125 (3.2) DEEP CASE B TRIPLE OUTPUT MODELS STANDARD PINOUT 2.20 (55.9) 0.50 (12.7) 0.60 (15.2) AC AC 1.60 (40.6) 3.50 (88.9) 0.15 (3.8) 2.50 (63.5) 1.60 (40.6) 0.50 (12.7) 0.60 (15.2) INSERTS 0.125 (3.2) DEEP CASE B SINGLE OUTPUT MODELS +- OUT OUT NC OUTPUT OUTPUT OVP (4) REGULATION RIPPLE AND CASE AVAILABLE MODELSVOLTAGE CURRENT LINE LOAD NOISE SINGLE OUTPUT 5VDC 500mA Yes ±0.02% ±0.04% 1mV rms B2 PM534CE 5VDC 1000mA Yes ±0.02% ±0.04% 1mV rms B2 PM542CE 5VDC 2000mA Yes ±0.02% ±0.05% 1mV rms B3 PM545CE DUAL OUTPUT ±12VDC ±240mA No ±0.02% ±0.02% 0.5mV rms B2 PM537CE ±12VDC ±400mA No ±0.02% ±0.02% 0.5mV rms B3 PM597CE ±15VDC ±100mA No ±0.02% ±0.02% 0.5mV rms B2 PM505CE ±15VDC ±200mA No ±0.02% ±0.02% 0.5mV rms B2 PM565CE ±15VDC ±350mA No ±0.02% ±0.02% 1mV rms B3 PM501CE TRIPLE OUTPUT (1) 5V/±12VDC 500/±120mA Yes ±0.02% ±.05%/±.02% 0.5mV rms B2 PM591CE 5V/±15VDC 500/±100mA Yes ±0.05% ±.10%/±.05% 0.5mV rms B2 PM590CE 1 to 10.5 Watt AC/DC encapsulated modules ENCAPSULATED LINEAR AC/DC POWER SUPPLIES | 1-10.5W AC PAGE 89http://www.artesyn.com Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Ar tesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompa ny the sale of any such product(s) or information contained herein. DS_PM500CE_20000101.PDF