PM501

PM500 ARTESYN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

PM500 INPUT VOLTAGE SUFFIX 115±10VAC (NONE) 220±20VAC D 240±20VAC K VM500 Series only VM534D INPUT VOLTAGE SUFFIX 200 to 233VAC D OUTPUT SPECIFICATIONS Voltage accuracy ±1.0% max. Voltage adjustability PM529 and PM563 only Yes Line regulation See table Load regulation See table Temperature coefficient ±0.02%/°C Overvoltage protection See table on facing 6.2V typical page for relevant models Output power limit Typical 130% to 200% FL Short circuit protection Switch off/on 100% to 200% FL INPUT SPECIFICATIONS Input voltage range See tables below Input frequency range PM500, See Note 3 47Hz to 400Hz VM500 47Hz to 63Hz Safety ground Less than 3.5mA leakage current @ 50Hz GENERAL SPECIFICATIONS Efficiency 40% typical Isolation voltage PM series, no suffix 700VAC PM series, suffix D 2500VAC PM series, suffix K 2500VAC VM534D 3000VAC Switching frequency Linear Approvals and Safety VM534D IEC950 standards Safety PM5xx CSA22.2-143/-154, UL478 Case material Non-conductive black plastic Weight Case A 181g (6.4oz) Case B1 (incl. VM534D) 340g (12oz) Case B2 408g (14.4oz) Case B3 635g (22.4oz) Case H 227g (8oz) MTBF See Note 4 710,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating amb. –25°C to +71°C Non-operating amb. –25°C to +85°C Derating, 50°C to 71°C 2.5%/°C Cooling Free-air convection Relative Humidity Non-condensing 20% to 95% RH Vibration Encapsulated Recommended for new design-ins PM500 and VM500 SERIES Single, dual and triple output [ 2 YEAR WARRANTY ]

• OVP on 5V outputs
• Split bobbin wound
• PCB mounting
• UL and CSA approved
• 115, 220 and 240VAC input
• Short circuit protection
• The VM500 Series has EN60950 approval These encapsulated, PC-mountable linear power modules feature 23 single output, 14 dual output and 13 triple output models for a wide variety of printed circuit board applications. The 5V output of all models have overvoltage crowbar protection as a standard feature. For maximum safety, all power transformers are split bobbin wound, rather than layer wound, to give total isolation with low coupling capacitance between primary and secondary. Conservative design and rating of these modules results in reliable operation and long life. Standard input voltage is 115VAC; other optional inputs are 220 and 240VAC. Most models are available in standard and alternate pin configurations for second sourcing applications. This series includes 5 sub- miniature modules for lower power applications where minimum circuit board space is available. SPECIFICATION All specifications are typical at nominal input, full load at 25 ° C unless otherwise stated PAGE 1

OUTPUT OUTPUT OVP REGULATION RIPPLE AND CASE AVAILABLE MODELS VOLTAGE CURRENT LINE LOAD NOISE 110VAC 220VAC 240VAC SINGLE OUTPUT 5VDC 250mA Yes ±0.02% ±0.04% 1mV rms B1 PM533D 5VDC 500mA Yes ±0.02% ±0.04% 1mV rms B1 PM534 PM534D PM534K 5VDC 500mA Yes ±0.02% ±0.04% 2.8mV rms B1 VM534D 5VDC 1000mA Yes ±0.02% ±0.04% 1mV rms B2 PM542 PM542D PM542K 5VDC 2000mA Yes ±0.02% ±0.05% 1mV rms B3 PM545 PM545D PM545K 12VDC 240mA No ±0.02% ±0.02% 0.5mV rms B2 PM515 PM515D 12VDC 400mA No ±0.02% ±0.02% 1mV rms B3 PM516D 12VDC 600mA No ±0.02% ±0.02% 1mV rms B3 PM517D 24VDC 100mA No ±0.02% ±0.02% 0.5mV rms B2 PM566D 24VDC 200mA No ±0.02% ±0.02% 0.5mV rms B3 PM567D 24VDC 400mA No ±0.02% ±0.02% 1mV rms B3 PM568D SUB MINIATURE SINGLE OUTPUT SERIES (1) 5VDC 250mA No ±0.05% ±0.05% 0.5mV rms H PM529 PM529D PM529K 12VDC 100mA No ±0.02% ±0.02% 0.5mV rms A PM563 PM563D DUAL OUTPUT ±12VDC ±120mA No ±0.02% ±0.02% 0.5mV rms B1 PM536 PM536D ±12VDC ±240mA No ±0.02% ±0.02% 0.5mV rms B2 PM537D ±12VDC ±400mA No ±0.02% ±0.02% 0.5mV rms B3 PM597 PM597D PM597K ±15VDC ±25mA No ±0.20% ±0.20% 2mV rms B1 PM538 ±15VDC ±100mA No ±0.02% ±0.02% 0.5mV rms B1 PM505 PM505D ±15VDC ±200mA No ±0.02% ±0.02% 0.5mV rms B2 PM565 PM565D ±15VDC ±350mA No ±0.02% ±0.02% 1mV rms B3 PM501 PM501D PM501K TRIPLE OUTPUT (2) 5V/±12VDC 300/±180mA No ±0.02% ±.05%/±.02% 0.5mV rms B2 PM595S PM595DS 5V/±12VDC 500/±120mA No ±0.02% ±.05%/±.02% 0.5mV rms B2 PM591D 5V/±15VDC 300/±150mA Yes ±0.05% ±.10%/±.05% 0.5mV rms B2 PM594 PM594DS 5V/±15VDC 500/±100mA Yes ±0.05% ±.10%/±.05% 0.5mV rms B2 PM590 PM590D PM590K Notes

1 Trim connection on all sub-miniature series modules provides a means of

externally adjusting a units output voltage precisely to its labelled value. To raise the output voltage, connect a resistance (20k Ω , min.) between the trim terminal and the positive (+) output terminal. To lower the output voltage, connect a resistance (20kΩ , min.) between the trim terminal and the negative (–) output terminal.

2 Triple output models only: on standard pin-out models the 5V output

common is isolated from the ±12VDC or ±15VDC common. 3 Some units should be derated for operation at 400Hz. Please contact the factory for details. for details.

5 All models are only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product. ALL DIMENSIONS IN INCHES (mm) SINGLE OUTPUT MODEL 0.50 (12.7) AC AC 2.20 (55.9) 1.60 (40.6) 3.50 (88.9) INSERTS

4.40 THREAD

0.125 (3.2) DEEP 0.15 (3.8) 2.50 (63.5) - OUT OUT 0.60 (15.2) NC 0.20 (5.1) MIN. 0.50 (12.7) 0.60 (15.2) 1.60 (40.6) 0.88 (22.4) 0.040 (1.0) DIA. PINS CASE VM534D 1 to 10.5 Watt AC/DC encapsulated modules AC/DC POWER SUPPLIES | 1.0-10.5W AC PAGE 2http://www.artesyn.com

1.75 (44.5) TRIM 0.80 (20.3) 1.80 (45.7) AC INSERT 0.12 (3.0) DEEP – OUT OUT + AC 0.60 (15.2) 0.275 (7.1) 0.20 (5.1) 0.40 (10.2) 1.55 (39.4) 0.20 (5.1) ALL DIMENSIONS IN INCHES (mm) 0.040 (1.0) DIA. PINS 0.20 (5.1) MIN. 2.00 (50.8) TRIM 0.20 (5.1) 3.00 (76.2) 2.60 (66.0) AC INSERT 0.12 (3.0) DEEP – OUT + OUT AC 1.60 (40.6) 1.00 (25.4) 0.040 (1.0) DIA. PINS 2.25 (57.2) 1.20 (30.5) OR (20K MIN.) (20K MIN.) – OUT + OUT TRIM SUB-MINIATURE SERIES 0.50 (12.7) AC 2.20 (55.9) 1.60 (40.6) 3.50 (88.9) INSERT 0.125 (3.2) DEEP 0.15 (3.8) 2.50 (63.5) - OUT OUT 0.60 (15.2) NC 0.20 (5.1) MIN. 0.50 (12.7) 0.60 (15.2) 1.60 (40.6) 1.62 (41.1) 0.88 (22.4) 0.040 (1.0) DIA. PINS B1 B2 B3 1.25 (31.8) AC 0.50 (12.7) 0.50 (12.7) 0.20 (5.1) MIN. 1.00 (25.4) CASE A CASE H CASE B 2.00 (50.8) ALL DIMENSIONS IN INCHES (mm) CASE B DUAL OUTPUT MODELS 0.50 (12.7) - OUT COM + OUT 0.60 (15.2) AC AC 2.20 (55.9) 1.60 (40.6) 3.50 (88.9) 0.15 (3.8) 2.50 (63.5) 1.60 (40.6) 0.50 (12.7) 0.60 (15.2) INSERTS 0.125 (3.2) DEEP 2.20 (55.9) + 5V COM COM 5V COM COM + 5V 0.50 (12.7) 0.60 (15.2) AC AC 1.60 (40.6) 3.50 (88.9) 0.15 (3.8) 2.50 (63.5) 1.60 (40.6) 0.50 (12.7) 0.60 (15.2) INSERTS 0.125 (3.2) DEEP 0.55 (14.0) 0.55 (14.0) AC AC 1.60 (40.6) 3.50 (88.9) 0.15 (3.8) 2.50 (63.5) 1.60 (40.6) 0.55 (14.0) 0.55 (14.0) INSERTS 0.125 (3.2) DEEP 1.62 (41.1) 0.040 (1.0) DIA. PINS B1 B2 B3 1.25 (31.8) 0.88 (22.4) 0.20 (5.1) MIN. CASE B TRIPLE OUTPUT MODELS STANDARD PINOUT SIDE VIEW CASE B TRIPLE OUTPUT MODELS ALTERNATE PINOUT SUFFIX '-S' Single output PM500 series Dual and triple output PM500 series International Safety Standard Approvals IEC950 Certificate No. IDP080 (VM534D only) UL478 Reg. File No. E131987 CSA22.2-143 and -154 Reg. File No. LR59996 1 to 10.5 Watt AC/DC encapsulated modules AC/DC POWER SUPPLIES | 1.0-10.5W AC PAGE 3