PM300CE ARTESYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Single, dual and triple output [ 2 YEAR WARRANTY ]

  • Encapsulated package
  • 2.5 to 15W modules
  • 230VAC input (115VAC version, see PM300 series)
  • Chassis mounting inserts
  • Terminal strip connections
  • Short circuit protection
  • EN55022, EN55011 conducted emissions level B
  • EN61000-4-2, -3, -4, -5, -6 compliant
  • Meets EN60950 The PM300CE series is an encapsulated, chassis mountable linear AC/DC power module with the CE mark to demonstrate compliance with the Low Voltage Directive for European applications. The series has single, dual and triple output models with industry standard output configurations operating from an input voltage of 230VAC making the PM300CE series suitable for a wide range of low power chassis applications. The PM300CE series includes 2.5W to 15W modules. Each module has short-circuit protection and the 5V outputs also have overvoltage protection. Conservative design and rating of these modules results in reliable operation and long life. There are four threaded inserts in the bottom of each module for convenient chassis mounting. The PM300CE design is a low emissions design with tightly regulated outputs making the series especially suitable for test, measurement and instrumentation equipment. SPECIFICATION All specifications are typical at nominal input, full load at 25 ° C unless otherwise stated PAGE 1 OUTPUT SPECIFICATIONS Voltage accuracy ±1.0%, max. Line regulation See table on facing page Load regulation See table on facing page Temperature coefficient ±0.02%/°C Overvoltage protection 5V outputs only 6.2V typical (See Note 4) Output power limit 130% to 200% FL typ. Short circuit protection 100% to 200% FL INPUT SPECIFICATIONS Input voltage range 230VAC ±10% Input frequency range (See Note 2) 47Hz to 400Hz Safety ground leakage <3.5mA @ 50Hz current EMC CHARACTERISTICS Conducted emissions EN55022 Level B Radiated emissions EN55022 Level B ESD air EN61000-4-2, level 3 Perf. criteria 1 ESD contact EN61000-4-2, level 4 Perf. criteria 1 Surge EN61000-4-5, level 3 Perf. criteria 1 Fast transients EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity EN61000-4-3, level 3 Perf. criteria 1 Conducted immunity EN61000-4-6, level 3 Perf. criteria 1 GENERAL SPECIFICATIONS Efficiency 40% typical Isolation voltage 3000VAC Isolation capacitance 50pF Approvals and Meets EN60950 standards (See Note 5) Case material UL94V-0 Non-conductive black plastic Weight Case C1 567g (20.02oz) Case C2 816g (28.80oz) MTBF (See Note 3) 710,000 hours ENVIRONMENTAL SPECIFICATIONS Temperature Operating ambient –25°C to +71°C Non-operating amb. –25°C to +71°C Derating, 50°C to 71°C 2.5%/°C Cooling Free-air convection cooled Relative Humidity Non-condensing 20% to 95% RH

OUTPUT OUTPUT OVP (4) REGULATION RIPPLE AND CASE AVAILABLE MODELSVOLTAGE CURRENT LINE LOAD NOISE SINGLE OUTPUT 5VDC 500mA Yes ±.05% ±0.10% 2mV rms C1 PM334CE 5VDC 1000mA Yes ±.05% ±0.15% 2mV rms C1 PM342CE 5VDC 2000mA Yes ±.05% ±0.15% 2mV rms C2 PM345CE DUAL OUTPUT ±12VDC ±240mA No ±0.05% ±0.05% 1mV rms C1 PM337CE ±12VDC ±400mA No ±0.05% ±0.05% 1mV rms C2 PM397CE ±15VDC ±100mA No ±0.05% ±0.05% 1mV rms C1 PM302CE ±15VDC ±200mA No ±0.05% ±0.05% 1mV rms C1 PM365CE ±15VDC ±350mA No ±0.05% ±0.05% 1mV rms C2 PM301CE ±15VDC ±500mA No ±0.05% ±0.05% 1mV rms C2 PM396CE TRIPLE OUTPUT (1) 5V/±12VDC 500/±120mA Yes ±0.05% ±0.1%/±0.05% 1mV rms C1 PM391CE 5V/±15VDC 500/±100mA Yes ±0.05% ±0.1%/±0.05% 1mV rms C1 PM390CE ALL DIMENSIONS IN INCHES (mm) – 5V OUT + 5V OUT + 12V OUT + 15V OUT – 12V OUT – 15V OUT AC AC COM AC AC COM NC – OUT + OUT AC AC COM NC + OUT NC 0.75 (19.1) 5.40 BH Screws C1 C2 1.45 (36.8) 2.00 (50.8)2.70 (68.6) 2.00 (50.8) 2.50 (63.5) 4.00 (101.6) 0.35 (8.9) INSERTS

4.40 THREAD

0.125 (3.2) DEEP 0.75 (19.1) Single Output Models Dual Output Models Triple Output Models CASE C Note

1 Triple output models only: the 5V output common is isolated from the

±12VDC or ±15VDC common. 2 Some units should be derated for operation at 400Hz. Please contact the factory for details. for details.

4 Triple output models only: overvoltage protection is only available on the

5V outputs.

5 All models are only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product. 2.5 to 15 Watt AC/DC encapsulated modules ENCAPSULATED LINEAR AC/DC POWER SUPPLIES | 2.5-15W AC PAGE 2http://www.artesyn.com DS_PM300CE_19980401.PDF Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Ar tesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompa ny the sale of any such product(s) or information contained herein.