PHV TRACOPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Features
◆ Compact high voltage power supplies ◆ Full SMD design with ceramic capacitors for highest reliability ◆ Positive or negative polarity models ◆ Excellent output stability ◆ Low temperature coefficient ◆ Ultra low ripple ◆ Remote voltage programming 0 to 100 % ◆ Short circuit protection ◆ Shielded metal case ◆ 3-year product warranty Order code Input voltage range Output voltage Output current max. PHV 12-350S10P 0...+350 VDC 10 mA PHV 12-350S10N 0...–350 VDC 10 mA PHV 12-0.5K1000P 0...+500 VDC 10 mA PHV 12-0.5K1000N 12 VDC 0...–500 VDC 10 mA PHV 12-1.0K5000N 0...–1000 VDC 5 mA Models The PHV series are regulated miniature high voltage power modules using SMD and hybrid technology. They are designed for PCB mounting. The use of high stability components guarantees a minimal temperature drift and a very stable output voltage. Typical applications for these HV power supplies are photomultiplier tubes, gas chromatography, analytical instruments and wherever where small size and high output voltage stability is requested. Order code P for positive output polarity Order code N for negative output polarity High Voltage Power Supplies PHV Series, 3.5 – 5 Watt not recommended for new design in
http://www.tracopower.com Page 2 of 4 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications Input voltage +10.8 to +16.5 VDC Reserve voltage protection none Conducted noise (input) internal filter Output Specifications Voltage set accuracy ±5 % Voltage adjustement range 0 – 100 % (adjustable with external voltage 0 to +6 VDC or with 5 kOhm variable resistor) Remote On/Off control On = pin 2 to pin 5 open Off = pin 2 to pin 5 short Regulation – Input variation Vin min. to Vin max. 0.01 % max. – Load variation 0–100% 0.01 % max. Ripple and noise (20 MHz Bandwidth) 100 mVpk-pk typ. Temperature coefficient ±0.01 %/K Stability 0.05 % 8h after warm-up time Output current limitation 1 10 % of lout max., constant current Short circuit protection continuous General Specifications Temperature ranges – Operating –10°C to +75°C – Case temperature +90°C max. – Storage –25°C to +75°C Derating 4 %/K above 50°C Humidity (non condensing) 30 – 95 % rel H max. Efficiency 60 – 65 % Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >300‘000 h Isolation (Input/Output) – Voltage none Switching frequency 90 kHz typ. (fixed) Vibration 5 – 10 Hz amplitude 10 mm pk-pk 10 – 55 Hz acceleration 2 G Thermal shock acceleration 20 G max. time 1 1 ms. Environmental compliance – Reach www.tracopower.com/products/phv-reach.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material Steel chrome-nickel plated Weight 65 g (2.29 oz) Soldering temperature max. 260°C / 10 sec. High Voltage Power Supplies PHV Series 3.5 – 5 Watt
http://www.tracopower.com Page 3 of 4 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Connection Diagram Connection for remote control by variable resistor Connection for remote control voltage control –Vin +Vin Load Vout Com HV out 54 3 SW1 ON/OFFV refV adj R2 R1 –Vin +Vin Load Vout Com HV out 54 3 SW1 ON/OFFV refV adj VR = 5 kOhm (open) Remote voltage control 0 – 6 V 47 µF 47 mF 4700 pF 4700 pF Open=ON Short=OFF Open=ON Short=OFF PHV Series PHV Series 80% 100% 60% 40% 20%
0 Ohm 5 kOhmR1
0 Ohm5 kOhmR2 Output Voltage [%]
80% 100% 60% 40% 20% Output Voltage [%] 2V 3V 4V 5V 6V Voltage Control High Voltage Power Supplies PHV Series 3.5 – 5 Watt
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com Page 4 of 4 Outline Dimensions Pin 1 +Vin (Vcc) 2 –Vin (GND) 3 V adj. 4 V ref.
5 ON/OFF*
6 Common
7 Vout
Rev. October 15, 2018 Dimensions in [mm], () = Inch Pin diameter: 0.8 ±0.05 (0.03 ±0.002) Tolerances: ±0.5 (±0.02) High Voltage Power Supplies PHV Series 3.5 – 5 Watt 12345 Bottom view 40.64 9.7 11 typ 20.329.8 5.08 5.08 5.08 (1.57) (2.36) (1.6) (0.38) (0.2) (0.2) (0.2) 7.3 (0.29) 12345 Bottom view 40.64 5.08 9.7 11 typ 20.329.8 5.08 5.08 5.08 (1.57)(0.8) (2.36) (1.6) (0.38) 7.3 (0.29) PHV 12-350 S 10P /N: all other models: *on request: add suffix RC