P5W243R3S HY-LINE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

5W DC-DC Converter P5W-Series

  • Wide 4:1 input range
  • -40...+85°C operatio n temperature range
  • Isolation up to 3500 V DC
  • MTBF > 1.121 MHours
  • Continuous short circuit protection
  • Efficiency up to 82% Model selection guide Input current Typ Input voltage range [VDC] No-load [mA] Full-load [mA] Output voltage [VDC] Output current [mA] Efficiency typ. [%] Capacitive load (*1) [µF] Single output Dual output Add suffix “H” for 3.5kV isolation voltage Note: *1 Test by nominal input voltage and constant resistor load Page 1 of 3 Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

5W DC-DC Converter P5W-Series Specifications Input : Filter Pi Network Input reflected ripple current 35 mAp-p (*2) Absolute max. input voltage Isolation: Rated voltage input/output 3 sec.

1500 VDC, Standard

3500 VDC, Suffix “H”

Ω Capacitance 500 pF, typ. Output: Voltage accuracy ± 1 % Line voltage regulation ± 0.5 %, max. Load voltage regulation ± 0.5 %, max. Temperature coefficient ± 0.02 % / °C Ripple and noise (at 20 MHz BW) 60 mVp-p, max. (*3) Short circuit protection Continuous Short circuit restart Automatic General: Switching frequency 266 kHz, typ. Safety in accordance with IEC60950-1:2001 Note: *2 Measured input reflected ripple current with a simulated source inductance of 12µH *3 Typical value at nominal input voltage and full load *4 It's recommended to add C: 68µF, C: 33µF and L: 12µH in input and to achieve EN55022 conducted class A Application circuit Efficiency vs output current Page 2 of 3 Environmental: Operating temperatur (ambient) -40 °C to +85 °C Case temperature 100 °C max. Storage temperature -40 °C to +125 °C Derating see diagram Humidity Up to 95 %, Cooling Free-air convection Physical : Dimensions 31.75 x 20.32 x 10.16 mm Weight 17 g Case material Nickel-coated copper Potting material Epoxy (UL94V-0 rated) Pin soldering temperature 260 °C for 10 s distance 1.5 mm from case EMC in accordance with Radiated emissions EN55022 class A Conducted emissions EN55022 class A (*4) ESD IEC61000-4-2 perf. criteria B RS IEC61000-4-3 perf. criteria A EFT IEC61000-4-4 perf. criteria B CS IEC61000-4-6 perf. criteria A PFMF IEC61000-4-8 perf. criteria A Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

5W DC-DC Converter P5W-Series Dimensions Pin connections Pin 1.5 / 3.5kVDC Single Dual 2 -V Input -V Input 3 -V Input -V Input

9 Omitted Common

11 N.C. -V Output 14 +V Output +V Output 16 -V Output Common 22 +V Input +V Input 23 +V Input +V Input Page 3 of 3 Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Life Support Policy : HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Com pany. Life support systems are dev ices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 11.10 f