DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

30 W DC-DC Converter P30D-Series

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

  • 4:1 wide input voltage range
  • Standard 2" x 1" package
  • Single, dual and triple output
  • High efficiency up to 91 %
  • Soft start
  • Over current protection
  • Over voltage protection
  • Over temperature protection
  • Continuous short circuit protection
  • Adjustable output voltage
  • On/Off - remote control input
  • Heat sink optional Model guide Designation key Output power Series designation Input voltage range Output voltage Output configuration Case option P PHI-CON 30 30 W D 24 9…36 V 3R3 3.3 V S single output blank standard 48 36…75 V 05 5 V D ± Dual output K heatsink 12 12 V 15 15 V Page 1 of 8 Type Input voltage Input current Output main Output auxilary. Efficiency [%] typ. Capacity load [µF] max. nominal [VDC] range [VDC] no load [mA] max. full load [mA] typ. Voltage [VDC] current [mA] Voltage [VDC] current [mA] Single output Dual output Triple output

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Specifications Derating at Standard version without heat sink Derating at heat sink version Page 2 of 8 General Switching frequency 330 kHz, typ. Standard in accordance with EN / IEC 60950-1 Radiated emissions EN55032 level A Conducted emissions (see fig. 3) EN55032 level A ESD IEC61000-4-2 pref. criteria A Radiated immunity IEC61000-4-3 pref. criteria A Fast transient (see figure 3) IEC61000-4-4 pref. criteria A Surge (see figure 3) IEC61000-4-5 pref. criteria A Conducted immunity IEC61000-4-6 pref. criteria A PFMF IEC61000-4-8 pref. criteria A Reliability calculated MTBF (MIL-HDBK-217 F) @ 25 °C P30DxxxxS; > 435 000 h P30DxxxxD: > 435 000 h P30DxxxxSxxD: > 320 000 h Environmental Operating ambient temperature -40 … 75 °C (with derating) -40 … 50 °C (without derating) Storage temperature -55 …125 °C Cooling Air convection 16...33 cm/s Maximum case temp. 105 °C, max. Over temperature protection 115 °C, typ Thermal impedance @ free air confection (35…65 LFM) Without heatsink: 12 K/W Without heatsink: 10 K/W Storage humidity 95 %, non condensing Physical Dimensions 50.8 x 25.4 x 12 mm Weight P30DxxxxS: 45 g P30DxxxxSK: 56 g Case material Copper Potting material Epoxy, UL94-V0 rated RoHS compliant yes Absolute maximum ratings Input surge voltage 100 ms max. P30D24xx: 50 VDC P30D48xx: 100 VDC Soldering temperature ≤ 260 °C, ≤ 10 s, ≥ 1.5 mm distance from case Input Input Filter: Pi- type Start up voltage P30D12xx: 8.6 V, typ. P30D48xx: 17.8 V, typ. Under voltage lockout P30D12xx: 7.9 V, typ. P30D48xx: 16 V, typ. Start up time 30 ms, typ. Input reflected ripple current 20 mAp-p, typ (see figures. 1) Remote control input Pin 3 (see figure 4) “on” Open input or 3.0…12 V “off” Short to -Vin or 0…1.2 V Input idle current @ rem. Ctrl "off" 5 mA @ nominal Vin Isolation input to output Isolation voltage, 60 sec, & Input to output or to case 1600 VDC, min. Resistance 109 Ω, min. Capacitance 1000 pF, typ. Output Voltage tolerance P30DxxxxS; P30DxxxxD: ± 1 % P30DxxxxSxxD main: ± 1 % P30DxxxxSxxD auxilary: ± 5 % Over voltage protection with Z-diode clamp P30Dxx3R3: 3.9 V P30Dxx05: 6.2 V P30Dxx12: 15 V P30Dxx15: 18 V Line regulation P30DxxxxS: ± 0.5 %, max. P30DxxxxD: ± 0.5 %, max. P30DxxxxSxxD main: ± 1 % P30DxxxxSxxD auxilary: ± 5 % Load regulation @ 0…100% load change P30DxxxxS: ± 0.5 %, max. P30DxxxxD: ± 1 %, max. P30DxxxxSxxD main: ± 1 %, max. P30DxxxxSxxD auxilary: ± 5 % max. Voltage trim range (only P30DxxxxS, single output) ± 10 %, max. (see fig. 5) Ripple and noise (at 20 MHz BW) (see figures 2) P30DxxxxS: ≤100 mVp-p, max. P30DxxxxD: ≤100 mVp-p, max. P30DxxxxSxxD main: ≤50 mVp-p P30DxxxxSxxD auxilary: ≤75 mVp-p Short circuit protection Hiccup, automatic recovery Temperature coefficient ± 0.02 % / °C Transient recovery time 250 µs, typ. @ 25 % load change steps Transient response deviation ± 3 %, max. @ 25 % load change steps Over load protection 150 %, max. of full load

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Measure circuit input reflected ripple current Figure 1a Single output Figure 1b Dual output version Figure 1c Triple output version Measure circuit output ripple and noise voltage Figure 2a Single output Page 3 of 8 33 µF + +Vin Load -Vout -Vin/GND +Vout 4.7 µH Measure point DC DC ESR <1 Ω @ 100 kHz The input reflected ripple current is measured through a source inductor 4.7 µH and a source capacitor Cin 33 µF, ESR <1 Ω at 100 kHz at nominal input voltage and full load. 33 µF + +Vin -Vout -Vin/GND 4.7 µH Measure point DC DC ESR <1 Ω @ 100 kHz Com +Vout Load 33 µF + +Vin Load -Aux -Vin/GND +Vout 4.7 µH Measure point DC DC ESR <1 Ω @ 100 kHz Com +Aux RL 1 µF +Vin -Vout +Vout DC DC GND CH1 -Vin/GND

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Measure circuit output ripple and noise voltage Figure 2b Dual output version Figure 2c Triple output version Recommended circuit to meet the EMC standard conducted emission EN 55032 Figure 3a Single output Figure 3b Dual output Page 4 of 8 RL RL 1 µF 1 µF +Vin -Vout -Vin/GND +Vout DC DC CH1 CH2 COM RL 1 µF RL RL 1 µF +Vin -Aux -Vin/GND +Vout DC DC GND CH1 CH3 COM +Aux CH2 1 µF +Vin - Vin/GND +Vin Load -Vout -Vin +Vout DC DC L EMI-Filter to meet class A EFT & Surge-Filter CY Cin Cin +Vout Load Com -Vout +Vin - Vin/GND +Vin -Vin DC DC L EMI-Filter to meet class A EFT & Surge-Filter CY Cin Cin

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Figure 3c Triple output version Figure 4 On / Off remote control circuit for positive logig Figure 5 Trimming application note (Single output version only) Output voltage trim function allows the user to increase or decrease the output voltage set point. The output voltage is adjustable in a range of ±10 %. Page 5 of 8 Table to figures 3a, 3b and 3c Type Cin C1 L CY P30D24xxx 220 µF/100 V 100 µF, 100 V 12 µH 470 pF, 2kV, MLCC P30D48xxx 220 µF/100 V 100 µF, 100 V 12 µH 470 pF, 2kV, MLCC +Vin -Vin/GND Ctrl +Vin Load -Vout +Vout DC DC Remote control input on: 3… 12 V or open Input off: 0…1.2 V -Vin/GND +Vout Load Com +Aux -Aux +Vin - Vin/GND +Vin -Vin DC DC L EMI-Filter to meet class A EFT & Surge-Filter CY Cin Cin Load 5 -Vout 4 +Vout DC DC

6 Trim

-Vin/GND +Vin

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Note: 1. All parameter are specified at 25 °C, 75 % air humidity, nominal input voltage and full load unless otherwise noted. 2. P30D series is usable with parallel connected output. Page 6 of 8

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Dimensions Dimensions in mm 1. Pin diameter tolerance: ± 0.05 mm 2. Pin length tolerance: ± 0.35 mm 3. Pitch tolerance: ± 0.35 mm 4. Case tolerance: ± 0.5 mm 5. Stand off tolerance: ± 0.1 Page 7 of 8 Pin assignment single, dual output P30DxxxxS P30DxxxxD 1 +Vin +Vin 2 -Vin -Vin 3 Rem. Ctrl. Rem. Ctrl. 4 + Vout + Vout 5 - Vout Com

6 Trim - Vout

Single and dual output converter Single and dual output converter

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Dimensions Page 8 of 8 Pin assignment triple output P30DxxxxSxxD 1 +Vin 2 -Vin 3 Rem. Ctrl. 4 + Aux 5 - Aux

6 Com

PHI-CON is a trademark of HY-LINE Holding GmbH. Only for professional use by professionals ! Not for resale or distribution to the general public in any way ! Read the instructions carefully before using! Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express wr itten approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 20180207 f Triple output converter Triple output converter Dimensions in mm 1. Pin diameter tolerance: ± 0.05 mm 2. Pin length tolerance: ± 0.35 mm 3. Pitch tolerance: ± 0.35 mm 4. Case tolerance: ± 0.5 mm 5. Stand off tolerance: ± 0.1 mm