P20A12S1P5 HY-LINE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

20W DC-DC Converter P20A-Series

  • Output current up to 6A
  • 20 W maximum output power
  • Adjustable Output Voltage
  • 2:1 wide input voltage range
  • Six-Sided continuous shield
  • High efficiency up to 89%
  • Standard 2" x 1" x 0.4" package
  • Fixed switching frequency Model selection guide Typ Input nominal voltage [VDC] Input current full-load [mA] Output voltage [VDC] Output current [mA] Output ripple & noise, BW: 20MHz [mVp-p] Efficiency typ. [%] Capacitor load max. [µF] Single output P20A12S1P5 9...18 1014 1.5 6000 60 78 65000 P20A12S1P8 9...18 1200 1.8 6000 60 79 65000 P20A12S2P5 9...18 1582 2.5 6000 60 83 33000 P20A12S3P3 9...18 1698 3.3 5000 60 85 13000 P20A12S05 9...18 2008 5.0 4000 75 87 6800 P20A12S12 9...18 2037 12.0 1670 75 86 2200 P20A12S15 9...18 2027 15.0 1330 75 86 755 P20A24S1P5 18…36 492 1.5 6000 100 80 65000 P20A24S1P8 18…36 585 1.8 6000 100 81 65000 P20A24S2P5 18…36 781 2.5 6000 60 84 33000 P20A24S3P3 18…36 838 3.3 5000 60 86 13000 P20A24S05 18…36 980 5.0 4000 60 89 6800 P20A24S12 18…36 1006 12.0 1670 60 87 2200 P20A24S15 18…36 1001 15.0 1330 75 87 755 P20A48S1P5 36...75 247 1.5 6000 75 80 65000 P20A48S1P8 36...75 288 1.8 6000 75 82 65000 P20A48S2P5 36...75 391 2.5 6000 100 84 33000 P20A48S3P3 36...75 414 3.3 5000 100 87 13000 P20A48S05 36...75 490 5.0 4000 60 89 6800 P20A48S12 36...75 497 12.0 1670 60 88 2200 P20A48S15 36...75 501 15.0 1330 60 87 755 Dual output P20A12D12 9...18 2032 ±12.0 ±833 60 86 2 x 680 P20A12D15 9...18 2034 ±15.0 ±667 75 86 2 x 450 P20A24D12 18…36 1004 ±12.0 ±833 75 87 2 x 680 P20A24D15 18…36 993 ±15.0 ±667 75 88 2 x 450 P20A48D12 36...75 496 ±12.0 ±833 100 88 2 x 680 P20A48D15 36...75 496 ±15.0 ±667 100 88 2 x 450 EMC Characteristics Conducted emissions EN55022 Class A Radiated emissions EN55022 Class A ESD EN61000-4-2 Perf. Criteria B Radiated immunity EN61000-4-3 Perf. Criteria A Fast transient EN61000-4-4 Perf. Criteria B Surge EN61000-4-5 Perf. Criteria B Conducted immunity EN61000-4-6 Perf. Criteria A Page 1 of 2 Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

All dimensions in inches (mm) Pin Pitch tolerance ±0.014 (0.35) 20W DC-DC Converter P20A-Series Specifications Input Filter L-C type Input surge voltage for 100mS max. 12V type 36 VDC max 24V type : 50 VDC max. 48V type : 100 VDC max. Remote CTRL On: open or 3..12 V DC Off: 0...1.2 VDC Remote CTRL input current -2.5mA Remote CTRL input reference -Input Output Power 20W max Voltage accuracy ± 1% Voltage adjustability ± 10% Cross regulation dual output 5% @ 25% & 100% of full load 1.8V outp.: 3.9V 12V outp.: 15V 2.5V outp.: 3.9V 15V outp.: 18V Over voltage protection zener diode clamp 3.3V outp.: 3.9V Over load protection 150% Short circuit protection Hicc up, automatics recovery Line regulation ± 0.2% Load voltage regulation ± 0.5% Temperature coefficient ± 0.02% / °C Transient response recovery time 250 µs / 25% load step change Minimum load Single: 0%, Dual: 10% Dimensions Derating Pin connections Pin Single Dual 1 + Input + Input 2 - Input - Input 3 + Output + Output

4 Trim Common

6 CTRL CTRL

Start up time@power- /remote on 10ms typ. Switching frequency 500 kHz, typ. Isolation voltage 1600 V DC Isolation Resistance 10 Ω Isolation Capacitance 1000 pF, max. Start up time @ nominal Vin and constant resistor load 10ms typ. MTBF Bellcore TR-NWT-000332 @Ta 40°C, 50% stress: 1.791x10 hrs Safity standards in accordance to EN60950-1, IEC60950-1, UL60950-1 Environmental Operating temperature -40 °C to +85 °C (with derating) Storage temperature -55 °C to +105 °C Maximum case temperature 100°C Thermal impedance Nature convection 12°/Watt Thermal shock MIL-STD-810D Vibration 10..55Hz, 10G, 30min, X,Y, Z axis Relative humidity 5% to 95% RH Physical Dimensions 1 x 2 inches 50.8 x 10.2 x 25.4 mm Weight 27 g Base material Non-conductive black plastic Case material Nickel-coated copper Potting material Epoxy (UL94-V0) Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Life Support Policy : HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 3 / 06 f Output can be externally trimmed by using the method shown below. ( ) for dual output TRIM UP TRIM DOWN