P10F243R3S HY-LINE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

10W DC-DC Converter P10F-Series

  • Wide 4:1 Input Range
  • 1600 V DC Isolation
  • MTBF >1 MHours
  • Continuous Short Circuit Protection
  • Over Load Protection
  • Over Voltage Protection
  • Efficiency up to 88%
  • 15 mA no load Input Current
  • Wide Operation Temperature Range -40...85°C
  • On / Off Remote Control Input
  • Soft Start Model selection guide Input current Typ Input voltage range [VDC] no load [mA] full load [mA] Output voltage [VDC] Output current [mA] Efficiency typ. [%] Capacitor load max. [µF] Single output P10F243R3S 9...36 15 440 3.3 2700 85 1200 P10F2405S 9...36 15 480 5.0 2000 87 1200 P10F2412S 9...36 15 475 12.0 833 88 270 P10F2415S 9...36 15 475 15.0 667 88 180 P10F483R3S 18...75 15 225 3.3 2700 84 1200 P10F4805S 18...75 15 240 5.0 2000 87 1200 P10F4812S 18...75 15 240 12.0 833 87 270 P10F4815S 18...75 15 240 15.0 667 87 180 Dual output P10F2405D 9...36 15 495 ±5.0 ±1000 85 2 x 820 P10F2412D 9...36 15 480 ±12.0 ±420 87 2 x 120 P10F2415D 9...36 15 480 ±15.0 ±330 87 2 x 100 P10F4805D 18...75 15 250 ±5.0 ±1000 85 2 x 820 P10F4812D 18...75 15 240 ±12.0 ±420 88 2 x 120 P10F4815D 18...75 15 240 ±15.0 ±330 88 2 x 100 Page 1 of 3 Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

10W DC-DC Converter P10F-Series Specifications Input Filter Pi Network Start up time with R-load 20 ms typ. Remote CTRL on/off, Pin1 On: 3...12 V or open input Off: 0...1.2 V Standby current 5mA typ Isolation: Rated voltage (for 60 s) 1600 V DC (flash tested 3s) Resistance 10 9 Ω Capacitance 1500 pF, typ. Output Voltage accuracy ± 1.2%, max. Voltage balance (dual outputs) ± 1% Temperature coefficient ± 0.02% / °C Ripple and noise (at 20 MHz BW) 85 mVp-p, max. Short circuit protection Indefinite (hiccup), Automatic restart Over load protection 170 % of Iout max. Over voltage protection 2.5 V, 3.3 V out type 3.9 V Z-diode clamping (±) 5.0 V out type 6.2 V Z-diode clamping (±) 12 V out type (±)15 V Z-diode clamping (±) 15 V out type (±)18 V Z-diode clamping Line voltage regulation ± 0.2 %, max. Load regulation 0...100% load single ± 0.5%, max. dual ± 1%, max. Cross regulation @ dual output ± 5 % Transient recovery time 250 µs typ. Transient response drift 3 % Page 2 of 3 General Switching frequency 270 kHz Safety Standard IEC 60950-1:2001 Reliability calculated MTBF (MIL-HDBK-217F) >1 Mhours @ 25°C EMC Characteristics Radiated Emissions EN55022 class A Conducted Emissions EN55022 class A ESD EN61000-4-2 Crit. B RS EN61000-4-3 Crit. A EFT EN61000-4-4 Crit. B Surge EN61000-4-5 Crit. B CS EN61000-4-6 Crit. A PFMF EN61000-4-8 Crit. A Environmental Operating temperatur (ambient) -40 °C to +85 °C See derating curve Case temperature 105 °C max. Storage temperature -40 °C to +125 °C Humidity Up to 95 %, non-condensing Cooling Free-air convection Physical Dimensions 31.75 x 20.32 x 10.16 mm Weight 18 g Case material Nickel-coated copper metal Potting material Epoxy (UL94V-0 rated) Absolute maximum ratings Pin soldering temperature 1.5mm distance from body 260°C for 10sec Input peak voltage for 0.1s -0.7 VDC …50 V DC @ 24 V type -0.7 VDC …100 V DC @ 48 V type Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch 12µH, LD1-120-R Coiltronics + INPUT 22 / 23 14 + OUTPUT Remote ON maximum 330µF KR-Series 1 C-Load Nippon Chemicon see table Remote OFF 2 / 3 16 - INPUT - OUTPUT DC/DC - Converter

10W DC-DC Converter P10F-Series Efficiency vs load Dimensions Pin connections Pin Single Dual 1 Remote contr. Remote contr. 2 -V Input -V Input 3 -V Input -V Input

9 Omitted Common

11 N.C. -V Output 14 +V Output +V Output 16 -V Output Common 22 +V Input +V Input 23 +V Input +V Input Page 3 of 3 Life Support Policy : HY-LINE does not authorize the use of any of its products for use in life support devices or syst ems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 2.10 f Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch