DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

10 W DC-DC Converter P10E-Series

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

  • Wide 2:1 input range
  • 1500 VDC isolation
  • MTBF > 1 Mio. h
  • Continuous short circuit protection
  • Over current protection Model guide Type Input voltage Input current Output voltage [VDC] nom. Output current Efficiency [%] typ. Capacitor load (see 1) [mA] max. Nominal [VDC] Range [VDC] No load [mA] max. Full load [mA] typ. [mA] min. [mA] max. Single output P10E122R5S 12 9...18 10 790 2.5 0 3000 81 2200 P10E123R3S 12 9...18 10 1005 3.3 0 3000 84 2200 P10E1205S 12 9...18 10 990 5.0 0 2000 86 2200 P10E1212S 12 9...18 10 980 12.0 0 833 87 820 P10E1215S 12 9...18 10 960 15.0 0 667 89 470 P10E242R5S 24 18...36 10 380 2.5 0 3000 84 2200 P10E243R3S 24 18...36 10 495 3.3 0 3000 85 2200 P10E2405S 24 18...36 10 480 5.0 0 2000 89 2200 P10E2412S 24 18...36 10 485 12.0 0 833 88 820 P10E2415S 24 18...36 10 485 15.0 0 667 88 470 P10E482R5S 48 36...75 10 190 2.5 0 3000 84 2200 P10E483R3S 48 36...75 10 250 3.3 0 3000 85 2200 P10E4805S 48 36...75 10 240 5.0 0 2000 88 2200 P10E4812S 48 36...75 10 245 12.0 0 833 87 820 P10E4815S 48 36...75 10 240 15.0 0 667 88 470 Dual output P10E1212D 12 9...18 10 980 ±12.0 0 ±416 87 2 x 220 P10E1215D 12 9...18 10 970 ±15.0 0 ±333 88 2 x 150 P10E2412D 24 18...36 10 485 ±12.0 0 ±416 88 2 x 220 P10E2415D 24 18...36 10 475 ±15.0 0 ±333 90 2 x 150 P10E4812D 48 36...75 10 245 ±12.0 0 ±416 87 2 x 220 P10E4815D 48 36...75 10 245 ±15.0 0 ±333 87 2 x 150 Specifications Page 1 of 4 Input Filter Pi Network Reflected input ripple current 20 mAp-p (Figure 1) Start up time 20 ms, typ. Isolation: In / Out Rated voltage (60 s) 1500 VDC, Standard Input or output to case 1000 VDC Resistance 109 Ω Capacitance 1000 pF, typ. Output Voltage accuracy ± 1 % Line regulation ± 0.5 %, max. Load regulation @ 0…100 % load change ± 0.5 % @ P10ExxxxS ± 1% @ P10ExxxxD & P10Exx3R3x Over current protection 150 %, typ. of max. current Short circuit protection Continuous (automatic restart) Ripple and noise (at 20 MHz BW) 75 mVp-p, max. Dual output cross deviation @ 75 % load difference 5 %, max. Temperature coefficient ± 0.02 % / °C Transient recovery time 200 µs, typ.@ 25 % load steps Output over voltage protection, Z-diode clamping P10Exx2R5S, P10Exx3R3S 3.9 V P10Exx05S 6.2 V P10Exx12x 15 V P10Exx15x 18 V General Switching frequency 330 kHz, typ. Safety standards IEC, EN, UL, cUL60950-1 IEC, EN, UL, cUL62368-1 Reliability calc. MTBF (MIL-HDBK-217F) 1 Mio. h @ Ta 25 °C EMC specifications Radiated emissions EN55032 Class A Conducted emissions EN55032 Class A (see Fig. 3) ESD IEC61000-4-2 perf. criteria A RS IEC61000-4-3 perf. criteria A EFT (see Fig. 3) IEC61000-4-4 perf. criteria A Surge (see Fig. 3) IEC61000-4-5 perf. criteria A CS IEC61000-4-6 perf. criteria A PFMF IEC61000-4-8 perf. criteria A Environmental Operating ambient temperature -40 … 85 °C Case temperature 100 °C, max. Storage temperature -40 … 125 °C Derating See SOA diagram Humidity 95 % max., non condensing Cooling Air convection 30..60 LFM Physical Weight 17 g Potting material Epoxy (UL94V-0 rated) Case material Nickel coated copper Absolute maximum ratings Input voltage < 100 ms P10E12xxx 25 VDC P10E24xxx 50 VDC P10E48xxx 100 VDC Lead soldering Temperature 260 °C for 10 s, distance from package 1.5 mm

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch 1. Specified by nominal in voltage and constant resistive load. 2. Parallel operation of DC/DC-Converter outputs is not recommendet. 3. The P10E-series is not usable in IGBT and MOSFET driver applications. Figure 1 Measure circuit input reflected ripple current Figure 2 Measure circuit output ripple & noise voltage Figure 3 Page 2 of 4 47 µF + +Vin Load -Vout -Vin/GND +Vout 12 µH Measure point DC DC ESR <1 Ω @ 100 kHz 1 µF ceramic +Vin -Vout -Vin +Vout Load DC DC 220 µF

100 V +

+Vin -Vin Load -Vout +Vout DC DC 100 µF 100 V 12 µH EMI-Filter to meet class B EFT & Surge-Filter

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Page 3 of 4

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Dimensions Page 4 of 4 Pin assignment Pin Single Dual 2 -V Input -V Input 3 -V Input -V Input

9 No Pin Common

11 Not Connected. -V Output 14 +V Output +V Output 16 -V Output Common 22 +V Input +V Input 23 +V Input +V Input PHI-CON is a trademark of HY-LINE Holding GmbH. Only for professional use by professionals ! Not for resale or distribution to the general public in any way ! Read the instructions carefully before using! Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 20171108 f All units in mm 1. Pin diameter tolerance ±0.05 mm 2. Pin pitch tolerance ±0.35 mm 3. Case tolerance ±0.5 mm