DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

10 W DC-DC Converter P10D-Series

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

  • Wide 4:1 input range
  • Efficiency up to 85 %
  • 1500 VDC isolation
  • Continuous short circuit protection
  • On/Off-Control input optional
  • Standard package 2” x 1” x 0.4”
  • MTBF 1.12 Mio. h
  • Wide operating temperature range -40..85 °C Model guide Type Input voltage Input current Output voltage [VDC] Output current Efficiency [%] typ. Capacitive load (note1) [µF] max. nominal [VDC] range [VDC] No load [mA] max. Full load [mA] typ. [mA] min. [mA] max. Single Output P10D243R3S 24 9...36 25 350 3.3 0 2000 80 3300 P10D2405S 24 9...36 25 510 5.0 0 2000 82 3300 P10D247R2S 24 9...36 25 500 7.2 0 1388 83 1000 P10D2409S 24 9...36 25 500 9.0 0 1111 83 680 P10D2412S 24 9...36 25 490 12.0 0 833 85 680 P10D2415S 24 9...36 25 490 15.0 0 666 85 470 P10D483R3S 48 18...72 20 175 3.3 0 2000 79 3300 P10D4805S 48 18...72 20 255 5.0 0 2000 82 3300 P10D487R2S 48 18...72 20 250 7.2 0 1388 83 1000 P10D4809S 48 18...72 20 250 9.0 0 1111 83 680 P10D4812S 48 18...72 20 245 12.0 0 833 85 680 P10D4815S 48 18...72 20 245 15.0 0 666 85 470 Dual Output P10D2405D 24 9...36 25 510 ±5.0 0 ±1000 82 2 x 2200 P10D247R2D 24 9...36 25 500 ±7.2 0 ±694 83 2 x 470 P10D2409D 24 9...36 25 500 ±9.0 0 ±555 83 2 x 470 P10D2412D 24 9...36 25 490 ±12.0 0 ±416 85 2 x 470 P10D2415D 24 9...36 25 490 ±15.0 0 ±333 85 2 x 330 P10D4805D 48 18...72 20 255 ±5.0 0 ±1000 82 2 x 2200 P10D487R2D 48 18...72 20 250 ±7.2 0 ±694 83 2 x 470 P10D4809D 48 18...72 20 250 ±9.0 0 ±555 83 2 x 470 P10D4812D 48 18...72 20 245 ±12.0 0 ±416 85 2 x 470 P10D4815D 48 18...72 20 245 ±15.0 0 ±333 85 2 x 330 Specifications Page 1 of 5 Input Under voltage protection P10D24xxx Lock in: 8.6 VDC, typ. Lock out: 8 VDC, typ. Under voltage protection P10D48xxx Lock in: 16 VDC, typ. Lock out: 14 VDC, typ. Start up time 20 ms, typ. Filter π - type Reflected input ripple current 35 mAp-p, typ. (see Fig. 1) Remote control (optional) Pin 6 (see fig. 4) On: open or 2.5…5.5 VDC Off: 0…0.7 VDC Off state input idle current 2.5 mA Isolation Voltage: Input to output 1.5 kVDC for 1 min. Input or output to Case 1 kVDC for 1 min. Resistance 109 Ω Capacitance 1200 pF, typ. Output Voltage accuracy ± 1 % Load voltage regulation ± 0.5 %, at 10..100 % load Line voltage regulation ± 0.5 %, max. Over current protection 140 % of max. Iout Dual output cross deviation ± 5 %, max. at 75 % load difference between the outputs Short circuit protection Continuous Short circuit restart Automatic Ripple and noise (at 20 MHz BW) 75 mVp-p, max. (see Figure 2) Temperature coefficient ± 0.02 % / °C General Switching frequency 300 kHz, typ. Safety standards EN-, IEC-, cUL-, UL 60950-1 EN-, IEC-, cUL-, UL 62368-1 Reliability calc. MTBF (MIL-HDBK-217F) 1.12 Mio. h EMC Radiated emissions EN 55032 class A Conducted emissions (see note 2) EN 55032 class A ESD IEC61000-4-2 perf. crit. B RS IEC61000-4-3 perf. crit. A EFT IEC61000-4-4 perf. crit. A Surge (see note 3) IEC61000-4-5 perf. crit. A CS IEC61000-4-6 perf. crit. A PFMF IEC61000-4-8 perf. crit. A Environmental Operating temperatur (ambient) -40 ... 85 °C Storage temperature -40 ... 125 °C Case temperature 100 °C, max. Derating None required Humidity 95 % max. non condensing Cooling Free air convection, 30..65 LFM Thermal impedance Without heatsink: 12 K / W Physical Dimensions 50.8 x 25.4 x 10.16 mm Weight 31 g Case material Nickel coated brass Potting material Epoxy (UL94V-0 rated) Pin material Brass solder coated Absolute maximum ratings Input voltage P10D24xxx 50 VDC, max. 100 ms Input voltage P10D48xxx 100 VDC, max. 100 ms Soldering temperature ≤ 260 °C max. for ≤ 10 s max., ≥ 1.5 mm distance from case

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Part number ordering key Output power Series Input voltage Output voltage Outputs Remote control P10 D 24 05 S C 10 Watt 24 9..36 V 3R3 3.3 V S single Blank No remote control Input 48 18..72 V 05 5 V D dual 7R2 7.2 V C With control input (Optional) 09 9 V 12 12 V 15 15 V Note: 1. All parameter are typical specified at Ta 25 °C, nominal input voltage and full load unless otherwise specified. 2. Maximal capacitive output load is specified at minimal input voltage and constant resistive load. 3. With input filter circuit to meet of conducted emissions EN 55032 class A. (see Figure 3) 4. An external input blocking capacitor is required if the converter has to meet the surge test IEC 61000-4-5. Suggested capacitor type: KY-series, 220 µF, 100 V, Nippon Chemicon (see Figure 3). Figure 1 Measurement circuit for reflected input ripple current Figure 2 Measurement method for output ripple voltage (BW 20 MHz) Single output version Dual output version Page 2 of 5 47 µF + +Vin Load -Vout -Vin/GND +Vout 12 µH Measure point DC DC ESR <1 Ω @ 100 kHz RL 1 µF +Vin -Vout +Vout DC DC GND CH1 -Vin/GND RL RL 1 µF 1 µF +Vin -Vout -Vin/GND +Vout DC DC CH1 CH2 COM

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Figure 3 Recommended input filter circuit to meet EMI (EN 55032 class A) and Surge (IEC 61000-4-5) specifications BOM to Figure 3 Family Cin C1 C2 L P10D24xxx 220 µF, 100 V 330 µF, 100 V 100 µF, 100V 12 µH P10D48xxx 220 µF, 100 V 330 µF, 100 V 100 µF, 100V 12 µH Figure 4 Application circuit for remote control function. This feature is optional, please see part number ordering key table. Page 3 of 5 +Vin -Vin/GND +Vin Load -Vout -Vin +Vout DC DC L EMI-Filter EFT & Surge-Filter Cin KY-Series + Nippon Chemicon ESR < 0.1Ω +Vin -Vin/GND Ctrl. 6 +Vin Load -Vout +Vout DC DC Remote control input on: 2.5 V…≤5.5 V or open input off: 0…0.8 V -Vin/GND 2

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Page 4 of 5

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Page 5 of 5 Pin assignment Without remote control With remote control Pin Single Dual Single Dual 1 +V input +V input +V input +V input 2 -V input -V input -V input -V input 3 +V output +V output +V output +V output

4 No pin common No pin common

5 -V output -V output -V output -V output

6 No pin No pin Remote CTRL Remote CTRL

PHI-CON is a trademark of HY-LINE Holding GmbH. Only for professional use by professionals ! Not for resale or distribution to the general public in any way ! Read the instructions carefully before using! Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 20180716 f Note: All dimensions in mm 1. Pin diameter tolerance ± 0.05 2. Pin pitch tolerance ± 0.35 3. Pin length tolerance ± 0.35 4. Case tolerance ± 0.5