P10C24S33W HY-LINE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

10W DC-DC Converter P10C-Series

  • 10 W Output Power
  • 4:1 Wide Input Voltage Range
  • Optional Remote Control Input
  • International Safety Standard
  • Six-Sided Continuous Shield
  • High Efficiency up to 84%
  • Standard 2" X 1" X 0.4" Package
  • Fixed Switching Frequency Model selection guide Typ Input nominal voltage [VDC] Input current full-load [mA] Output voltage [VDC] Output current [mA] Efficiency typ. [%] Capacitor load max. [uF] Output over voltage protection [V] Single output P10C24S05W 9...36 548 5 2000 80 4700 6.2 P10C24S12W 9...36 532 12 830 82 680 15 P10C24S15W 9...36 551 15 670 80 470 18 P10C48S05W 18...75 274 5 2000 80 4700 6.2 P10C48S12W 18...75 259 12 830 84 680 15 P10C48S15W 18...75 262 15 670 84 470 18 Dual output P10C24D05W 9...36 548 ±5 ±1000 80 2 x 680 6.2 P10C24D12W 9...36 547 ±12 ±416 80 2 x 330 15 P10C24D15W 9...36 548 ±15 ±333 80 2 x 110 18 P10C48D05W 18...75 271 ±5 ±1000 81 2 x 680 6.2 P10C48D12W 18...75 281 ±12 ±416 78 2 x 330 15 P10C48D15W 18...75 270 ±15 ±333 81 2 x 110 18 Page 1 of 2 Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

10W DC-DC Converter P10C-Series Specifications Input Filter π Pi type Start up time @ R-load 20ms typ. Input surge voltage for 100mS max. 24V type : 50 VDC max. 48V type : 100 VDC max. Remote CTRL (Option) Positive logic Suffix “P” On: open or 3.5..12 VDC Off: 0...1.2 VDC Negative logic Suffix “N” On: 0...1.2 V DC Off: open or 3.5..12 VDC Remote CTRL input current -2.5mA Remote CTRL input reference -Input Remote off, Input current 20mA Output Power 10W max Voltage accuracy ± 2% Ripple and noise (at 20 MHz BW) Single type: 50mVp-p Dual type: 75mVp-p Short circuit protection Hicc up, automatics recovery Line voltage regulation ± 0.2% Load voltage regulation single: ± 0.5% dual: ±1% Temperature coefficient ± 0.02% / °C Minimum load 10% to maintain the specified regulation Dimensions Derating All dimensions in inches (mm) Pin Pitch tolerance ±0.014 (0.35) Pin connections Standard Pin Single Dual 1 + Input + Input 2 - Input - Input 3 + Output + Output

4 No Pin Common

6 CTRL (Option) CTRL (Option)

Switching frequency 300 kHz, typ. Isolation voltage 1600 V DC Isolation Leakage current 1 mA Isolation Resistance 10 Ω Isolation Capacitance 300 pF, typ. Standard in accordance with EN60950-1, IEC60950-1, UL60950-1 MTBF Bellcore TR-NWT-000332 @Ta 40°C, 50% stress: 1.976x10 hrs Environmental Operating temperature -25 °C to +85 °C (standard, derating) Option “-M1” -40 °C to +85 °C (no derating) Option “-M2” (W-series) -40 °C to +85 °C (with derating) Storage temperature -55 °C to +105 °C Maximum case temp. +100 °C Humidity 5% to 95% RH Cooling Free-air convection Physical Dimensions 1 x 2 x 0.4 inches 50.8 x 10.2 x 25.4 mm Weight 27 g Case material Nickel-coated copper Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Life Support Policy : HY-LINE does not authorize the use of any of its products for use in life s upport devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 9 / 05 f