DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

10 W DC-DC Converter P10A-Series

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

  • Wide 2:1 input range
  • Efficiency up to 86 %
  • Isolation 1500 VDC
  • Continuous short circuit protection
  • On/Off-Control input optional
  • Standard package 2” x 1” x 0.4”
  • Wide operating temperature range -40..85 °C Model guide Type Input voltage Input current Output voltage [VDC] Output current Efficiency [%] typ. Capacitive load (note1) [µF] max. nominal [VDC] range [VDC] No load [mA] max. Full load [mA] typ. [mA] min. [mA] max. Single Output P10A123R3S 12 9...18 30 705 3.3 0 2000 78 2200 P10A1205S 12 9...18 30 1015 5.0 0 2000 82 2200 P10A127R2S 12 9...18 30 1005 7.2 0 1388 83 1000 P10A1209S 12 9...18 30 1005 9.0 0 1111 83 1000 P10A1212S 12 9...18 30 990 12.0 0 833 84 680 P10A1215S 12 9...18 30 990 15.0 0 666 84 470 P10A1218S 12 9...18 30 980 18.0 0 555 85 470 P10A1224S 12 9...18 30 980 24.0 0 416 85 330 P10A243R3S 24 18...36 25 350 3.3 0 2000 78 2200 P10A2405S 24 18...36 25 510 5.0 0 2000 82 2200 P10A247R2S 24 18...36 25 500 7.2 0 1388 83 1000 P10A2409S 24 18...36 25 495 9.0 0 1111 84 1000 P10A2412S 24 18...36 25 495 12.0 0 833 84 680 P10A2415S 24 18...36 25 490 15.0 0 666 85 470 P10A2418S 24 18...36 25 490 18.0 0 555 85 470 P10A2424S 24 18...36 25 485 24.0 0 416 86 330 P10A483R3S 48 36...72 20 175 3.3 0 2000 78 2200 P10A4805S 48 36...72 20 250 5.0 0 2000 83 2200 P10A487R2S 48 36...72 20 250 7.2 0 1388 83 1000 P10A4809S 48 36...72 20 250 9.0 0 1111 84 1000 P10A4812S 48 36...72 20 250 12.0 0 833 84 680 P10A4815S 48 36...72 20 250 15.0 0 666 84 470 P10A4818S 48 36...72 20 245 18.0 0 555 85 470 P10A4824S 48 36...72 20 245 24.0 0 416 86 330 Dual Output P10A123R3D 12 9...18 30 1070 ±3.3 0 ±1000 78 2 x 1000 P10A1205D 12 9...18 30 1015 ±5.0 0 ±1000 82 2 x 1000 P10A127R2D 12 9...18 30 1005 ±7.2 0 ±694 83 2 x 680 P10A1209D 12 9...18 30 990 ±9.0 0 ±555 84 2 x 470 P10A1212D 12 9...18 30 990 ±12.0 0 ±416 84 2 x 470 P10A1215D 12 9...18 30 980 ±15.0 0 ±333 85 2 x 330 P10A1218D 12 9...18 30 980 ±18.0 0 ±277 85 2 x 220 P10A1224D 12 9...18 30 980 ±24.0 0 ±208 85 2 x 220 P10A243R3D 24 18...36 25 350 ±3.3 0 ±1000 78 2 x 1000 P10A2405D 24 18...36 25 510 ±5.0 0 ±1000 82 2 x 1000 P10A247R2D 24 18...36 25 500 ±7.2 0 ±694 83 2 x 680 P10A2409D 24 18...36 25 500 ±9.0 0 ±555 83 2 x 470 P10A2412D 24 18...36 25 495 ±12.0 0 ±416 84 2 x 470 P10A2415D 24 18...36 25 495 ±15.0 0 ±333 84 2 x 330 P10A2418D 24 18...36 25 490 ±18.0 0 ±277 85 2 x 220 P10A2424D 24 18...36 25 490 ±24.0 0 ±208 85 2 x 220 P10A483R3D 48 36...72 20 175 ±3.3 0 ±1000 78 2 x 1000 P10A4805D 48 36...72 20 255 ±5.0 0 ±1000 82 2 x 1000 P10A487R2D 48 36...72 20 250 ±7.2 0 ±694 84 2 x 680 P10A4809D 48 36...72 20 250 ±9.0 0 ±555 84 2 x 470 P10A4812D 48 36...72 20 245 ±12.0 0 ±416 85 2 x 470 P10A4815D 48 36...72 20 245 ±15.0 0 ±333 85 2 x 330 P10A4818D 48 36...72 20 240 ±18.0 0 ±277 86 2 x 220 P10A4824D 48 36...72 20 240 ±24.0 0 ±208 86 2 x 220 Part number designation structure Output power Series Input voltage Output voltage Outputs Primary / secondary isolation P10 A 24 05 S 10 Watt 12 9..18 V 3R3 3.3 V S Single blank 1.5 kVDC 24 18..36 V 05 5 V D Dual ± 48 36..72 V 7R2 7.2 V 09 9 V 12 12 V 15 15 V 18 18 V 24 24 V Page 1 of 5

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Specifications Note: 1. The maximum capacitive load is specified at minimal input voltage and constant resistive load. 2. With input filter circuit to meet of conducted emissions EN55032 class A. (See figure 3) 3. An external input blocking capacitor is required if the converter has to meet IEC61000-4-5. Suggested capacitor type: KY-series, 220 µF, 100 V, Nippon Chemicon. (See figure 3) 4. No load operation will not damage the converter, however they may not meet all listed parameters. Figure 1 Measurement circuit for reflected input ripple current Page 2 of 5 EMC Radiated emissions EN55032 class A Conducted emissions (see figure 3) EN55032 class A ESD IEC61000-4-2 perf. crit. A RS IEC61000-4-3 perf. crit. A EFT (see figure 3) IEC61000-4-4 perf. crit. A Surge (see figure 3) IEC61000-4-5 perf. crit. A CS IEC61000-4-6 perf. crit. A PFMF IEC61000-4-8 perf. crit. A Environmental Operating ambient temperature -40 ... 85 °C Storage temperature -40 ... 125 °C Case temperature 100 °C, max. Derating None required Humidity 95% max. non condensing Cooling Free air convection, 30…60 LFM Physical Dimensions 50.8 x 25.4 x 10.16 mm Weight 31 g Case material Nickel coated brass Potting material Epoxy (UL94V-0 rated) Pin material Brass, nickel coated Absolute maximum ratings Input voltage P10A12xxx 25 VDC, max. 100 ms Input voltage P10A24xxx 50 VDC, max. 100 ms Input voltage P10A48xxx 100 VDC, max. 100 ms Soldering temperature min. 1.5 mm distance from case 260 °C max. for 10 s max. Input Start up time @ resistive Load and Vin nominal 20 ms, typ. Filter π - type Reflected input ripple current 35 mAp-p, typ. (see Fig. 1) Isolation Voltage: Input to output Suffix blank: 1.5 kVDC for 60 s Input or output to Case 1 kVDC for 1 min. Resistance 109 Ω Capacitance 500 pF, typ. Output Voltage tolerance ± 1 % Load regulation at 0..100 % load Single output: ± 0.5 %, Dual output: ± 1 % Line voltage regulation ± 0.5 %, max. Over current protection 140 %, typ. of max. Iout Short circuit protection Continuous Short circuit restart Automatic Ripple and noise (at 20 MHz BW) 100 mVp-p, max. (see Fig. 2) Temperature coefficient ± 0.02 % / °C Transient recovery time at 25 % load change steps 250 µs, typ. Transient response deviation at 25 % load change steps ± 3 %, max. General Switching frequency 200 kHz, typ. Safety standards EN-, IEC-, UL-, cUL 60950-1 EN-, IEC-, UL-, cUL 62368-1 Reliability calc. MTBF @ 25 °C (MIL-HDBK-217F) 1.12 Mio. h 47 µF + +Vin Load -Vout -Vin/GND +Vout 12 µH Measure point DC DC ESR <1 Ω @ 100 kHz

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Figure 2 Measurement method for output ripple voltage (BW 0…20 MHz) Single output Dual output Figure 3 Recommended input filter circuit to meet EFT & Surge and EMI specifications BOM to Figure 3 Family Cin C1 C2 L C3 P10A12xxx 220 µF, 100 V 330 µF, 100 V 100 µF, 100V 12 µH 1 nF, 3 kVDC P10A24xxx 220 µF, 100 V 330 µF, 100 V 100 µF, 100V 12 µH 1 nF, 3 kVDC P10A48xxx 220 µF, 100 V 330 µF, 100 V 100 µF, 100V 12 µH 1 nF, 3 kVDC Page 3 of 5 RL 1 µF +Vin -Vout +Vout DC DC GND CH1 -Vin/GND RL RL 1 µF 1 µF +Vin -Vout -Vin/GND +Vout DC DC CH1 CH2 COM +Vin -Vin/GND +Vin Load -Vout -Vin +Vout DC DC L EMI-Filter EFT & Surge-Filter Cin KY-Series + Nippon Chemicon ESR < 0.1Ω

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Page 4 of 5

Deutschland: Schweiz: Inselkammerstraße 10 Hochstrasse 355 D-82008 Unterhaching CH-8200 Schaffhausen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch Page 5 of 5 Pin assignment Pin Single output Dual output 1 + V input + V input 2 - V input - V input 3 + V output + V output

4 No pin Common

PHI-CON is a trademark of HY-LINE Holding GmbH. Only for professional use by professionals ! Not for resale or distribution to the general public in any way ! Read the instructions carefully before using! Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 20180712 f Note: All dimensions in mm 1. Pin diameter tolerance ± 0.05 2. Pin pitch tolerance ± 0.35 3. Pin length tolerance ± 0.35 4. Case tolerance ± 0.5