OVLGO0C7B9

OVLGO0CXB9 OPTEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Issue 1.0 0505 Page 1 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com

1 ANODE 2 CATHODE

High-Intensity Orange LED in Plastic T-1¾ Package OVLGO0CxB9 x Narrow Beam Angle x High Luminous Intensity x Water Clear Plastic Package x Orange (615nm) The OVLGO0CxB9 is a high intensity AlInGaP LED mounted in a clear plastic T-1¾ package. The device incorpo- rates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light over a wide range of drive currents, this LED is useful in applications requiring higher on-axis brightness than that achievable with standard lamps.

Applications

x Indoor/Outdoor Applications x Message Boards x Store Front Signage x Indicators Product Photo Here Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLGO0C6B9 AlInGaP Orange 10000 Water Clear OVLGO0C7B9 12500 OVLGO0C8B9 16000 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS

Issue 1.0 0505 Page 2 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com T-1¾ High-Intensity Orange LED OVLGO0CxB9 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +85 °C Reverse Voltage 5 V Continuous Forward Current2 50 mA Peak Forward Current (10% Duty Cycle, 1KHz) 100 mA Power Dissipation 120 mW

2000 V Electrostatic Discharge

Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260 °C Note: 1. Solder time less than 5 seconds at temperature extreme.

Electrical Characteristics

TA = 25oC unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Iv Luminous Intensity x = 6 6300 10000 ---- mcd IF = 20mA 7 8000 12500 ---- 8 10000 16000 ---- VF Forward Voltage ---- 2.0 2.4 V IF = 20mA IR Reverse Current ---- ---- 10 µA VR = 5V P Peak Wavelength ---- 621 ---- nm IF = 20mA D Dominant Wavelength ---- 615 ---- nm IF = 20mA 2 ½H-H 50% Power Angle ---- 6 ---- deg IF = 20mA

Issue 1.0 0505 Page 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com T-1¾ High-Intensity Orange LED OVLGO0CxB9 Typical Electro-Optical Characteristics Curves Relative Intensity vs. Radiation Angle Forward Current vs. Forward Voltage V mA Relative Luminous Intensity vs. Forward Current mA Relative Luminous Intensity vs. Ambient Temperature Forward Current vs. Ambient Temperature mA Relative Luminous Intensity vs. Wavelength mA Half Power WL = 18nm

Issue 1.0 0505 Page 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue Change Description Approval Date 1.0 Initial Release J. Haynie 6/7/05 T-1¾ High-Intensity Orange LED OVLGO0CxB9