OVLGJ0C3B9 OPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com

1 ANODE 2 CATHODE

High-Intensity Yellow-Green LED in Plastic T-1¾ Package OVLGJ0C3B9 x Narrow beam angle x High luminous intensity x Water clear plastic package x Yellow-Green (575 nm) The OVLGJ0C3B9 is a high intensity AlInGaP LED mounted in a clear plastic T-1¾ package. The device incorporates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light over a wide range of drive currents, this LED is useful in applications requiring higher on-axis brightness than that achievable with standard lamps.

Applications

x Indoor/Outdoor Applications x Message Boards x Store Front Signage x Indicators Product Photo Here Part Number Material Emitted Color Intensity Typ. mcd Lens Color AlInGaP Yellow-Green Water Clear OVLGJ0C3B9 2300 DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. Data is subject to change without prior notice. RoHS

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com T-1¾ High-Intensity Yellow-Green LED OVLGJ0C3B9 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range -40 ~ +100 ° C Operating Temperature Range -40 ~ +85 ° C Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260 ° C Reverse Voltage 5 V Continuous Forward Current2 25 mA Peak Forward Current (10% Duty Cycle, 1KHz) 180 mA Power Dissipation 100 mW Note: 1. Solder time less than 5 seconds at temperature extreme.

Electrical Characteristics

TA = 25oC unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Iv Luminous Intensity 1500 2300 ---- IF = 20 mA VF Forward Voltage ---- 2.0 2.4 V IF = 20 mA IR Reverse Current ---- ---- 10 µA VR = 5 V P Peak Wavelength ---- 575 ---- nm IF = 20 mA D Dominant Wavelength ---- 573 ---- nm IF = 20 mA 2 ½H-H 50% Power Angle ---- 6 ---- deg IF = 20 mA mcd Spectral Bandwidth ---- 20 ---- nm IF = 20 mA

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com T-1¾ High-Intensity Yellow-Green LED OVLGJ0C3B9 Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage V mA Relative Luminous Intensity vs. Wavelength mA Half Power WL = 18nm Relative Luminous Intensity vs. Forward Current mA Relative Luminous Intensity vs. Ambient Temperature Forward Current vs. Ambient Temperature mA Relative Intensity vs. Radiation Angle