OVLGG0CXB9 OPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Issue 1.0 0505 Page 1 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com

1 ANODE 2 CATHODE

High-Intensity Green LED in Plastic T-1¾ Package OVLGG0CxB9 x Narrow Beam Angle x High Luminous Intensity x Water Clear Plastic Package x Green (525nm) The OVLGG0CxB9 is a high intensity InGaN LED mounted in a clear plastic T-1¾ package. The device incorpo- rates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light over a wide range of drive currents, this LED is useful in applications requiring higher on-axis brightness than that achievable with standard lamps.

Applications

x Indoor/Outdoor Applications x Message Boards x Store Front Signage x Indicators Product Photo Here Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLGG0C4B9 InGaN Green 4000 OVLGG0C5B9 5000 OVLGG0C6B9 6300 Water Clear OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS

Issue 1.0 0505 Page 2 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com T-1¾ High-Intensity Green LED OVLGG0CxB9 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +85 °C Reverse Voltage 5 V Continuous Forward Current2 25 mA Peak Forward Current (10% Duty Cycle, 1KHz) 100 mA Power Dissipation 100 mW

150 V Electrostatic Discharge

Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260 °C Note: 1. Solder time less than 5 seconds at temperature extreme.

Electrical Characteristics

TA = 25oC unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Iv Luminous Intensity x = 4 2500 4000 ---- mcd IF = 20mA 5 3200 5000 ---- 6 4000 6300 ---- VF Forward Voltage ---- 3.5 4.0 V IF = 20mA IR Reverse Current ---- ---- 50 µA VR = 5V P Peak Wavelength ---- 518 ---- nm IF = 20mA D Dominant Wavelength ---- 525 ---- nm IF = 20mA 2 ½H-H 50% Power Angle ---- 6 ---- deg IF = 20mA

Issue 1.0 0505 Page 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com T-1¾ High-Intensity Green LED OVLGG0CxB9 Typical Electro-Optical Characteristics Curves Relative Intensity vs. Radiation Angle Forward Current vs. Forward Voltage V mA Relative Luminous Intensity vs. Forward Current mA Relative Luminous Intensity vs. Ambient Temperature Forward Current vs. Ambient Temperature mA % Relative Luminous Intensity vs. Wavelength mA Half Power WL = 35nm

Issue 1.0 0505 Page 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue Change Description Approval Date 1.0 Initial Release J. Haynie 6/7/05 T-1¾ High-Intensity Green LED OVLGG0CxB9