OVLFY3C7 OPTEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 1 of 4 Round Yellow Through-hole LED Lamp (5 mm) OVLFY3C7 x High brightness with well-defined spatial radiation patterns x UV-resistant epoxy lens x Yellow (589 nm) Product Photo Here Part Number Material Emitted Color Intensity Typ. (mcd) Lens Color AlInGaP Yellow Water Clear OVLFY3C7 5700 The OVLFY3C7 is a high-intensity AlInGaP LED mounted in a clear plastic T-1¾ package. Its UV-resistant epoxy lens makes this device an optimal solution for outdoor applications. This LED provides a well-defined and even emission pattern.
Applications
x Traffic and pedestrian signals x Signage and architectural lighting x Backlighting x Automotive DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. RoHS Moisture
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 2 of 4 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Round Yellow Through-hole LED (5 mm) OVLFY3C7 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +85° C Reverse Voltage 5 V Continuous Forward Current2 30 mA Peak Forward Current (10% Duty Cycle, 1KHz) 100 mA Power Dissipation 78 mW Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260° C Current Linearity vs. Ambient Temperature -0.5 mA/° C LED Junction Temperature 125° C Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Design of Heat Dissipation should be considered.
Electrical Characteristics
TA = 25oC unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Iv Luminous Intensity 3115 5700 ---- mcd IF = 20 mA VF Forward Voltage ---- 2.2 2.6 V IF = 20 mA IR Reverse Current ---- ---- 10 µA VR = 5 V P Peak Wavelength ---- 593 ---- nm IF = 20 mA D Dominant Wavelength ---- 589 ---- nm IF = 20 mA 2 ½ 50% Power Angle ---- 30 ---- deg IF = 20 mA Spectra Half Width ---- 25 ---- nm IF = 20 mA Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content <1000 PPM.. Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLFY3C7 may be filled with any or all bins contained as below. Rank G H J 6 Forward Voltage (VF) 6105– 8550 X 4360– 6105 W 3115– 4360 V Dominant Wavelength (nm) Luminous Intensity (mcd) 585 589 592 595 Luminous intensity is at V bin or above.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 3 of 4 Round Yellow Through-hole LED (5 mm) OVLFY3C7 Typical Electro-Optical Characteristics Curves Reverse Current vs Reverse Voltage A V Forward Current vs Ambient Temperature mA Relative Luminous Intensity vs Wavelength nm Beam Pattern Relative Luminous Intensity vs Forward Current mA Relative Luminous Intensity vs Ambient Temperature Forward Current vs Forward Voltage mA V
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 4 of 4 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Carrier Tape Dimensions: Loaded quantity 1000 pieces per reel Round Yellow Through-hole LED (5mm) OVLFY3C7 Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label Packing Information: Available in bulk or reel Bulk: 500 pcs/bag 13-inch reel: 1000 pcs/reel