OVLEW1CB9 OPTEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 1 of 5 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OVLEW1CB9 x Narrow beam angle x High luminous intensity x Water clear plastic package x InGaN White x Pb-free The OVLEW1CB9 is a round 5 mm white high-intensity lamp with a 15° viewing angle. It is designed for applications that require high luminous intensity, such as indoor and outdoor displays, marker lights and optical indicators. The phosphor used in the reflector converts the blue emission of the InGaN chip to ideal white light so that the best mode of white light intensity and CIE chromaticity are achieved.
Applications
x Indoor/outdoor displays and applications x Message boards x Store front signage x Indicators Part Number Material Emitted Color Intensity Typ. mcd OVLEW1CB9 InGaN White 9000 Lens Color Water Clear White High-Intensity LED Lamp (5 mm, 15° Viewing Angle)
1 ANODE 2 CATHODE
RETINA MAY OCCUR. RoHS Moisture
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 2 of 5 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Absolute Maximum Ratings TA = 25o C (on metal core PCB1) unless otherwise noted Note: 1. Solder time less than 5 seconds at temperature extreme.
Electrical Characteristics
TA = 25o C (on metal core PCB1) unless otherwise noted Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. To designate luminous intensity ranks, please contact OPTEK. Rank A1 A2 B1 B2 C1 C2 D1 D2 Chromaticity Coordinates Luminous Intensity (mcd) Luminous Intensity is at J2 bin or above. A1 A2 B1 B2 C1 C2 14250-18000 L1 11250-14250 K2 9000-11250 K1 7150-9000 J2 Chromaticity Coordinates (x, y) Standard Bins (IF = 20mA) Lamps are sorted to luminous flux ( V) and chromaticity coordinates (x, y) bins shown. Orders for OVLEW1CB9 may be filled with any or all bins contained as below. White High-Intensity LED Lamp OVLEW1CB9 Storage Temperature Range -40 ~ +100 ° C Operating Temperature Range -40 ~ +85 ° C Reverse Voltage 5 V Continuous Forward Current 25 mA Peak Forward Current (10% Duty Cycle, 1KHz) 100 mA Power Dissipation 100 mW Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260 ± 5° C Electrostatic Discharge 150 V SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 7150 9000 ---- mcd IF = 20 mA VF Forward Voltage ---- 3.5 4.0 V IF = 20 mA IR Reverse Current ---- ---- 50 µA VR = 5 V 2 ½ 50% Power Angle ---- 15 ---- deg IF = 20 mA x Chromaticity Coordinates
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 3 of 5 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. CIE Chromaticity Diagram White High-Intensity LED Lamp OVLEW1CB9
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 4 of 5 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Typical Electro-Optical Characteristics Curves Forward Current vs Forward Voltage mA V Forward Current vs Ambient Temperature mA White High-Intensity LED Lamp OVLEW1CB9 Chromaticity Coordinate vs Forward Current mA Co-ordinate Relative Luminous Intensity vs Forward Current mA 150% 100% 50% Relative Luminous Intensity vs Wavelength nm 100% 80% 60% 40% 20% Relative Intensity vs Angle Displacement Radiation Angle 100% 50%
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 5 of 5 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Packing Information: 500 pieces per Bag White High-Intensity LED Lamp OVLEW1CB9