OVLBB4C7 OPTEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Issue 1.0 0705 Page 1 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Round Blue Through-hole LED Lamp (3mm) Part Number Material Emitted Color Intensity Typ. mcd OVLBB4C7 InGaN Blue 900 Lens Color Water Clear OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OVLBB4C7 x High Brightness with Well-defined Spatial Radiation Patterns x UV-resistant Epoxy Lens x Blue (470nm) The OVLBB4C7 is a high-intensity InGaN LED mounted in a clear plastic T-1 package. Its UV-resistant epoxy lens makes this device an optimal solution for outdoor applications. This LED provides a well-defined and even emis- sion pattern.
Applications
x Signage and Architectural Lighting x Backlighting x Automotive
Issue 1.0 0705 Page 2 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Round Blue Through-hole LED (3mm) OVLBB4C7 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range -40 ~ +100°C Operating Temperature Range -40 ~ +85°C Reverse Voltage 5 V Continuous Forward Current 20 mA Peak Forward Current (10% Duty Cycle, 1KHz) 50 mA Power Dissipation 80 mW Current Linearity vs. Ambient Temperature -0.2 mA/°C LED Junction Temperature 125°C Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260°C Note: 1. Solder time less than 5 seconds at temperature extreme.
Electrical Characteristics
TA = 25oC unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Iv Luminous Intensity 525 900 ---- mcd IF = 20mA VF Forward Voltage ---- 3.4 4.0 V IF = 20mA IR Reverse Current ---- ---- 50 µA VR = 5V D Dominant Wavelength 465 470 475 nm IF = 20mA 2 ½H-H 50% Power Angle ---- 45 ---- deg IF = 20mA P Peak Wavelength ---- 466 ---- nm IF = 20mA Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content <1000PPM. Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLBB4C7 may be filled with any or all bins contained as below. Beam Pattern Rank H J K L Forward Volt- 1440 1025 7R 735 7Q 525 7P Dominant Wavelength (nm) Luminous intensity is at 7P bin or above. 465 470 475 Luminous Intensity (mcd) BM BJ
Issue 1.0 0705 Page 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Round Blue Through-hole LED (3mm) OVLBB4C7 Typical Electro-Optical Characteristics Curves Relative Luminous Intensity vs. Ambient Temperature Relative Luminous Intensity vs. Wavelength mA Half Power WL = 25nm Forward Current vs. Forward Voltage V mA Relative Luminous Intensity vs. Forward Current mA Forward Current vs. Ambient Temperature mA Reverse Current vs. Reverse Voltage V A V
Issue 1.0 0705 Page 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Round Blue Through-hole LED (3mm) OVLBB4C7 Packing Information: Available in Bulk or Reel Bulk: 500 pcs/bag Carrier Tape Dimensions 13-Inch Reel: 2500 pcs/reel Moisture Resistant Reel Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label
Issue 1.0 0705 Page 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue Change Description Approval Date 1.0 Initial Release J. Haynie 7/20/05 Round Blue Through-hole LED (3mm) OVLBB4C7