OVFSW6C8 OPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Issue 1.0 0505 Page 1 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin White LED Lamp (7.6mm) OVFSW6C8 x Packaged in tubes x Compatible with automatic placement equipment x Compatible with infrared and vapor phase reflow solder process x Mono-color type x Pb-free The OVFSW6C8 is designed with higher forward voltage to maximize brightness and incorporates a low-profile lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low cur- rent requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square package allows high-density arrays to form light engines.

Applications

x Automotive: Rear Stop/Turn Signal Lamps/Truck Marker Lamps x Mood-setting Decoration and Landscape Lighting x Special Decorative Interior/Exterior Lighting x Special Effects Stage Lighting x Illumination for Signs and Channel Letters Product Photo Here Part Number Material Emitted Color Intensity Typ. mcd OVFSW6C8 InGaN White 1200 Lens Color Water Clear RoHS Data is subject to change without prior notice. 2,3 ANODE 1,4 CATHODE

Issue 1.0 0505 Page 2 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin White LED Lamp (7.6mm) OVFSW6C8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -30 ~ +80°C Operating Temperature Range -20 ~ +75°C Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260°C Reverse Voltage 5 V Continuous Forward Current 30 mA Peak Forward Current (10% Duty Cycle, PW ”—VHF 100 mA Power Dissipation 140 mW Note: 1. Solder time less than 3 seconds at temperature extreme.

Electrical Characteristics

TA = 25o C unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 770 1200 ---- mcd IF = 30mA VF Forward Voltage ---- 4.0 4.6 V IF = 30mA IR Reverse Current ---- ---- 100 µA VR = 5V 2 ½ 50% Power Angle ---- 60 ---- deg IF = 30mA Chromaticity Coordinates Rank V10 V11 V12 V13 V14 V15 Forward Voltage (VF) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. Standard Bins (IF = 30mA) Lamps are sorted to luminous intensity (IV), forward voltage (VF), and dominant wavelength ( D) bins shown. Orders for OVFSW6C8 may be filled with any or all bins contained as below. Luminous intensity is at S bin or above. 1520-2130 U 1100-1520 T 770-1100 S A B1 B2 Luminous Intensity (mcd) C Dominant Wavelength (nm) Rank A B1 B2 Chromaticity Coordinates C

Issue 1.0 0505 Page 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin White LED Lamp (7.6mm) OVFSW6C8 CIE Chromaticity Diagram x y

Issue 1.0 0505 Page 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin White LED Lamp (7.6mm) OVFSW6C8 Typical Electro-Optical Characteristics Curves mA Forward Current vs. Forward Voltage V 100 nm Relative Luminous Intensity vs. Wavelength mA 0 20 40 60 80 100 R j – pin=250°C/ W R j – a=400°C/ W Maximum Forward DC Current vs. Ambient Temperature Reverse Current vs. Reverse Voltage A -50 -40 -30 -20 -10 0 -10 -20 -30 -40 -50 V 100 Far Field Pattern 50% Power Angle: 60° 400 500 600 700 800 100% 75% 50% 25% Half Power WL = 150nm Relative Luminous Intensity vs. Forward Current 2.5 2.0 1.5 1.0 0.5 0 20 60 80 100 mA

Issue 1.0 0505 Page 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin White LED Lamp (7.6mm) OVFSW6C8 Moisture Resistant Packaging 60/Tube Aluminum Moisture-proof Bag Desiccant Bar Code Label

Issue 1.0 0505 Page 6 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue Change Description Approval Date 1.0 Initial Release R. Bailey 5/19/05 4-Pin White LED Lamp (7.6mm)