OVFSQ4C8 OPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Issue 1.0 0505 Page 1 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin Red-Orange LED Lamp (7.6mm) OVFSQ4C8 x Packaged in tubes x Compatible with automatic placement equipment x Compatible with infrared and vapor phase reflow solder process x Mono-color type x Pb-free The OVFSQ4C8 is designed with higher forward voltage to maximize brightness and incorporates a low-profile lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low cur- rent requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square package allows high-density arrays to form light engines.

Applications

x Automotive: Rear Stop/Turn Signal Lamps/Truck Marker Lamps x Mood-setting Decoration and Landscape Lighting x Special Decorative Interior/Exterior Lighting x Special Effects Stage Lighting x Illumination for Signs and Channel Letters x Traffic Signals, Pedestrian and Walkway Signs Product Photo Here Part Number Material Emitted Color Flux Typ. mlm OVFSQ4C8 AlInGaP Red-Orange 4500 Lens Color Water Clear RoHS Data is subject to change without prior notice. 2,3 ANODE 1,4 CATHODE

Issue 1.0 0505 Page 2 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin Red-Orange LED Lamp (7.6mm) OVFSQ4C8 Storage Temperature Range -40 ~ +100°C Operating Temperature Range -40 ~ +100°C Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260°C Reverse Voltage 5 V Continuous Forward Current2 70 mA Peak Forward Current (10% Duty Cycle, PW ”—VHF 200 mA Power Dissipation 220 mW Absolute Maximum Ratings TA = 25o C unless otherwise noted Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Heat sink is adequate if the device is operated at ambient temperature higher than 25°C. For long term performance the drive currents between 10mA and 50mA are recommended. Please contact an Optek sales representative for more information on recommended drive conditions.

Electrical Characteristics

TA = 25o C unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS lumen Luminous Flux 3000 4500 ---- mlm IF = 70mA VF Forward Voltage ---- 2.6 3.2 V IF = 70mA IR Reverse Current ---- ---- 100 µA VR = 5V D Dominant Wavelength 612 618 628 nm IF = 70mA 2 ½ 50% Power Angle ---- 40 ---- deg IF = 70mA Standard Bins (IF = 70mA) Lamps are sorted to luminous flux ( V), forward voltage (VF), and dominant wavelength ( D) bins shown. Orders for OVFSQ4C8 may be filled with any or all bins contained as below. Rank V4 V5 V6 V7 V8 Forward Voltage (VF) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 5000-7300 M 4000-6100 L 3500-4800 K 3000-4200 J Luminous flux is at J bin or above. 612 Dominant Wavelength (nm) 628 Luminous Flux mlm)

Issue 1.0 0505 Page 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin Red-Orange LED Lamp (7.6mm) OVFSQ4C8 Typical Electro-Optical Characteristics Curves Relative Luminous Flux vs. Wavelength nm Half Power WL = 23nm Far Field Pattern 50% Power Angle: 40° Forward Current vs. Forward Voltage V mA Relative Luminous Flux vs. Forward Current mA Maximum Forward DC Current vs. Ambient Temperature mA V Reverse Current vs. Reverse Voltage A

Issue 1.0 0505 Page 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 4-Pin Red-Orange LED Lamp (7.6mm) OVFSQ4C8 Moisture Resistant Packaging 60/Tube Aluminum Moisture-proof Bag Desiccant Bar Code Label

Issue 1.0 0505 Page 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue Change Description Approval Date 1.0 Initial Release R. Bailey 5/19/05 4-Pin Red-Orange LED Lamp (7.6mm) OVFSQ4C8