OPV200 OPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • 850nm VCSEL Technology
  • High thermal stability
  • Low drive current/high output density
  • Narrow and concentric beam angle
  • Up to 1.25 Gbps
  • Recommended for multimode fiber applica- tions
  • Flat Window
  • Burned in for communication level reliability
  • Recommended for external lens applica- tions
  • Suitable for sensing applications Maximum Reverse Voltage 5 Volts Storage Temperature -40 to +125°C Operating Temperature -40 +85° C Soldering Lead Temperature 260° C for 10 Seconds Max. Continuous Optical Power at 70°C 1.1 mW

Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com www.optekinc.com SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITION POT Power Out Total 1.45 4.5 mW IF = 12 mA ITH Threshold Current 2.0 5.5 mA Note1 VF Forward Voltage 2.15 V IF = 12 mA IR Reverse Current, VCSEL 30 nA VR = 5 V RS Series Resistance 15 40 ohms Note 2 h Slope Efficiency 0.17 mW/mA Note 3 Linearity 0.0 Note 4 l Wavelength 830 850 860 nm Dl Optical Bandwidth 0.85 nm q Beam Divergence 12 Degree IF = 12 mA tr/tf Rise and Fall Time 200 ps 20% to 80% NRI Relative Intensity Noise -123 db/Hz DlTH/DT Temp Coefficient of Threshold Current ±1.5 mA 0° - 70° C, Note 1 Dl/DT Temp Coefficient of Wavelength 0.06 %/°C 0° - 70° C, IF = 12 mA DVFDT Temperature Coefficient for VF -2.5 mV/°C 0° - 70° C, IF = 12 mA Dh/DT Temperature Coefficient for Efficiency -0.4 %/C 0° - 70° C, Note 3 OPV200 Technical Data NOTES: (1) Threshold Current is based on the two line intersection method specified in Telcordia GR-468-Core. Line 1 from 6 mA to 8 mA. Line 2 from 0 mA to 2 mA. (2) Series Resistance is the slope of the Voltage-Current line from 8 to 12 mA. (3) Slope efficiency, is the slope of the best fit LI line from 8 mA to 12 mA. (4) Using data points taken for slope efficiency above, delta L/delta I shall be calculated for each adjacent pair of .5mA points. The minimum shall be 0.0. (No negative values permitted). Electrical/Optical Characteristics (at 25 C unless otherwise specified) Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com www.optekinc.com OPV200 Technical Data Output Power vs. Forward Current Forward Current (mA) Normalized Output Power (12mA, 25 Forward Voltage vs. Forward Current Forward Current (mA) Forward Voltage (V) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1.2 1.4 1.6 1.8 2.0 2.2 25 C 0 C 70 C 25 C 0 C 70 C Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com www.optekinc.com Pin Connection

1 VCSEL Anode

2 VCSEL Cathode

3 N/C

Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. 1) Tolerances are ±0.005 unless otherwise specified