OPF470_14 OPTEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com Issue A 8/2012 Page 1 of 3 Fiber Optic Detector OPF470 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Applications
♦ Industrial Ethernet equipment ♦ Copper-to-fiber media conversion ♦ Intra-system fiber optic links ♦ Video surveillance systems OPF470
- Electrically isolated plastic cap package
- High speed, low capacitance
- Designed to self align in the 0.228 diameter bore of stand- ard fiber optic receptacles.
- Press fit simplified component installation
- 35MHz operation minimum The OPF470 is a low noise silicon PIN photodiode mounted in a low cost package for fiber optic applications. It offers fast re - sponse at moderate bias and is compatible with LED and laser diode sources in the 800-1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applications. The OPF470 is designed to be compatible with multimode optical fibers from 50/125 to 200/300 microns. RoHS
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com Issue A 8/2012 Page 2 of 3 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Electrical/Optical Characteristics (TA = 25°C unless otherwise noted) Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -55° C to +115° C Operating Temperature Range -40° C to +100° C Lead Soldering Temperature(1) 260° C Continuous Power Dissipation(2) 200 mW Maximum Reverse Voltage 100 VDC Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended. 2. De-rate linearly at 2.13mW/ °C above 25°C . SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS R Responsivity 0.45 0.55 A/W VR = 5.0V; 50/125µm fiber; λ = 850nm ID Dark Current 0.1 5.0 nA VR = 5.0V λp Peak Response Wavelength 905 nm tr Output Rise Time 6.0 ns VR = 15V; RL = 50Ω, 10%-90% CT Total Capacitance 3.0 pF VR = 20V FoV Field of View 80 deg
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com Issue A 8/2012 Page 3 of 3 Fiber Optic Detector OPF470 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Mechanical Data DIMENSIONS ARE IN INCHES (MILLIMETERS)