OP223_06 OPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.2 07/06 Page 1 of 3 Hi-Reliability GaAIAs Infrared Emitting Diode OP223, OP224 (TX, TXV) OP224 (S) Description: Each OP223 (TX, TXV) and OP224 (S, TX, TXV) device is an 890 nm high reliability gallium aluminum arsenide infrared emitting diode that is mounted in a miniature hermetically sealed “pill” type package which can be directly mounted to PCBoards. The gallium aluminum arsenide feature provides twice the radiated output of gallium arsenide at the same forward current. After electrical testing by manufacturing, devices are processed to OPTEK’s 100 percent screening program, which is patterned after MIL-PRF-19500. With a wavelength centered at 890 nm, the OP223 (TX, TXV) and OP224 (S, TX, TXV). TX and TXV devices are processed to OPTEK’s military screening program patterned after MIL-PRF-19500. S devices are processed to OPTEK’s military screening program patterned after MIL-STD-883. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Contact your local representative or OPTEK for more information. Features:

  • Processed to OPTEK’s military screening program, patterned after MIL-PRF-19500
  • Miniature hermetically sealed “pill” package
  • Twice the power output of GaAs at same drive current
  • “S” level screening available
  • Mechanically and spectrally matched to OP600 phototransistors Part Number LED Peak Wavelength Output Power/ Minute Total Beam Angle Lead Length OP223TX 890 nm 1.00 mW/cm2 24° N/A OP223TXV 1.50 mW/cm2 OP224S OP224TX OP224TXV Applications:
  • Non-contact reflective object sensor
  • Assembly line automation
  • Machine automation
  • Machine safety
  • End of travel sensor
  • Door sensor Pin # LED Sensor

1 Anode Collector

2 Cathode Emitter

[MILLIMETERS]DIMENSIONS ARE IN:

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.2 07/06 Page 2 of 3 Hi-Reliability GaAIAs Infrared Emitting Diode OP223, OP224 (TX, TXV) OP224 (S) Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -65o C to +150o C Operating Temperature Range -55o C to +125o C Lead Soldering Temperature 1/16 inch (1.6 mm) from case for 5 seconds with soldering iron 260° C Reverse Voltage 2.0 V Continuous Forward Current 100 mA Power Dissipation(2) 100 mW Notes: 1. No clean or low solids. RMA flux is recommended. Durati on can be extended to 10 seconds maximum when flow soldering. 2. Derate linearly 1.00 mW/° C above 25° C. Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode EE (APT) Radiant Power Output OP223 (TX, TXV) OP224 (S, TX, TXV) 1.00 1.50 mW IF = 50 mA IF = 50 mA VF Forward Voltage 0.80 - 1.80 V I F = 50 mA IR Reverse Current - - 100 µA V R= 2.0 V λP Wavelength at Peak Emission - 890 - nm I F = 50 mA B Spectral Bandwidth between Half Power Points - 80 - nm I F = 50 mA ∆λP /∆T Spectral Shift with Temperature - 0.18 - nm/°C I F = Constant θHP Emission Angle at Half Power Points - 18 - Degree I F = 50 mA

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.2 07/06 Page 3 of 3 Hi-Reliability GaAIAs Infrared Emitting Diode OP223, OP224 (TX, TXV) OP224 (S) OP223 (TX, TXV), OP224 (S, TX, TXV) 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Forward Current (mA) Typical Forward Voltage (V) -60° C -40° C -20° C 0° C 20° C 40° C 60° C 80° C 100° C 120°C Forward Voltage vs Forward Current vs Temperature 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Forward Current I F (mA) Normalized Optical Power -60° C -40° C -20° C 0° C 20° C 40° C 60° C 80° C 100° C 120° C Normalized at 50 mA and 20° C Optical Power vs IF vs Temperature Distance (inches) Normalized Output Power 10 mA 20 mA 30 mA 40 mA 50 mA 60 mA 70 mA 80 mA 90 mA 100 mA Normalized at 1" and 50 m A Forward Current Distance vs Output Power vs Forward Current 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 -20 -15 -10 -5 0 5 10 15 20 Angular Displacement (Degrees) Relative Radiant Intensity Forward Voltage vs Relative Radiant Intensity vs Angular Displacement