OP205CL_14 OPTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A 10/06 Page 1 of 2 Infrared Light Emitting Diode OP205CL Description: The OP205CL is a high efficiency GaAIAs infrared LED mounted in a TO-46 metal can package. The device features a special dome lens that allows a very narrow beam angle. The result is a near parallel beam that is useful in applications that requires a collimated light source with a uniform intensity pattern. OP205CL LED is mechanically and spectrally matched to OP800 series phototransistors. Features:

  • High power GaAIAs
  • Narrow beam angle—near parallel beam
  • 875 nm wavelength
  • TO-46 package
  • Wide operating temperature range

Ordering Information

OP205CL 875 nm 10° 34mm RoHS Applications:

  • Optical encoders
  • Triangulation sensors
  • Long distance sensing 0mm Pinhole L=2-5mm D -3.0 -2.4 0 40% 60% 80% 100% 120% Relative Radiant Intensity Linear Displacement—D (mm) Relative Radiant Intensity vs. Linear Displacement 20% L = 2mm L = 3mm L = 5mm

Infrared Light Emitting Diode OP205CL OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A 10/06 Page 2 of 2 Electrical Characteristics (TA = 25°C unless otherwise noted) Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40° C to +125° C Operating Temperature Range -40° C to +100° C Lead Soldering Temperature 260° C(1) Reverse Voltage 3.0 V Continuous Forward Current 50 mA Power Dissipation 160 mW(2) Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. De-rate linearly at 2.17 mW/° C above 25° C. 3. Total Optical Power (P O) is measured by OPTEK Technology equipment. SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS PO Radiant Intensity 8.5 12.0 - mW IF = 50mA(3) VF Forward Voltage - - 2.0 V IF = 50mA IR Reverse Current - - 10 µA VR = 3.0V λP Peak Emission Wavelength - 875 - nm IF = 20mA ΘHP Total Emission Angle at Half Power Points - 6 10 Deg. IF = 20mA 100°C -40°C Relative Radiant Intensity vs. Forward Current vs. Temperature 0 10 20 30 40 50 Forward Current (mA) Relative Radiant Intensity 100% 150% 200% 250% 300% 350% Normalized at IF = 20mA, TA = 20°C. Temperatures stepped in 20°C Increments 50% 0% 1.1 1.2 1.3 1.4 1.5 1.6 Forward Voltage (V) Forward Voltage vs. Forward Current vs. Temperature 0 10 20 30 40 50 Forward Current (mA) -40°C 100°C Temperatures stepped in 20°C Increments