NPS62-M ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
60 Watts
Total Power: 60 Watts Input Voltage: 90 - 264 VAC 127 - 300 VDC # of Outputs: Single SPECIAL FEATURES Medical and ITE safety approvals Universal input Less than 1U high 2” x 4” footprint Remote sense Overload and short circuit protection Adjustable output voltage High efficiency High MTBF Built-in EMI filter (CISPR 22 Class B) International Efficiency Level V, Energy Star 2.0 & CeC compliant (except NPS62-M) Less than 300 mW no-load power consumption (less than 500 mW for NPS62-M) 0 °C to +80 °C operation Input power < 74 watts Complies with EN61000-3-2 UL Class I approved Class II approved (with Class A EMI) LPX100 enclosure kit available Dual AC fuses RoHS compliant SAFETY TUV: 60950, 60601-1 UL: 60950, 60601-1 CSA: 60950, 60601-1 NEMKO: 60950, 60601-1 CB: Certificate and report CE: Mark (LVD) CCC: Mark Electrical Specifications Input Input ra nge 90 - 264 Vac (wide range) 127-300 Vdc Frequency 47 - 63 Hz Inrush current < 50 A peak @ 230 Vac, cold start @ 25° C Input power < 74 Watts Efficiency 87% average (as per Energy Star 2.0 standard) (NPS62-M, 80%) EMI/RFI FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Safety ground leakage current 275 µA @ 50/60 Hz; 264 Vac input Output Maximum power 60 W for convection Adjustment range ± 20% minimum Hold-up time 13/75 ms 115/230 Vac input line Overload protection Short circuit protection on all outputs. Case overload protected @ 110-160% of normal rating Overvoltage protection 30-50% above nominal output Remote sense Compensated for 0.5 V lead drop max. Will operate without remote sense connected. Reverse connection protected. Data Sheet
Environmental Specifications Operating temperature 0 ° to 50 °C ambient derate each output at 2.5% per degree from 50 ° to 80 °C. -20 °C start up Storage temperature -45 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 10% to 90% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions Mechanical Drawing BARCODE SERIAL LABEL GND TAB (CN1) PIN 1 PIN 3 SK1 MODEL LABEL ROHS LABEL 0.16” (4.0) MOUNTING HOLE (4 PLACES) 4.00" (101.6) 3.73" (94.6) PIN 1 PIN 6 SK2 1.72" (43.8) 2.00" (50.8) 0.87" (22) NPS62-M 1.14” (29) M2 6 PIN OUTPUT CONNECTOR (SK2) 1.01" (26) INPUT CONNECTOR (SK1) VR1 OUTPUT VOLTAGE ADJUST POT 0.197” (5.0) MINIMUM STANDOFF HEIGHT
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com NPS60-M DS 21Mar2016
Ordering Information
Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Peak Load1 Regulation2 Ripple P/P (PARD)3 NPS62-M 5 V 0 A 11 A 13 A ± 2% 50 mV NPS63-M 12 V 0 A 5 A 5.5 A ± 2% 120 mV NPS63-M-0064 12 V 0 A 5 A 5.5 A ± 2% 120 mV NPS64-M 15 V 0 A 4 A 4.4 A ± 2% 150 mV NPS65-M 24 V 0 A 2.5 A 2.75 A ± 2% 240 mV Pin Assignments Connector NPS62-M NPS63-M NPS65-M SK1-1 Line Line Line SK1-3 Neutral Neutral Neutral CN1 Ground Ground Ground SK2-1 +5 V +12 V +24 V SK2-2 +5 V +12 V +24 V SK2-3 Common Common Common SK2-4 Common Common Common SK2-5 -Sense -Sense -Sense SK2-6 +Sense +Sense +Sense Mating Connectors AC Input Molex 09-50-8031 (USA) 09-93-0300 (UK) PINS: 08-52-0113 DC Outputs Molex 09-50-8061 (USA) 09-93-0600 (UK) PINS: 08-52-0113 Artesyn Embedded Technologies Connector Kit #70-841-006 includes all of the above. Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5 mm) 3. Mounting holes M1 and M2 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated. 6. For DC input an external DC safety rated fuse must be used 7. Warranty: 2 year 8. Weight: 0.26 lbs/0.118 kg 1. Peak current lasting <15 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. Compliant to Level VI efficiency. 5. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users.