MMD-3567L MARKIMICROWAVE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
GaAs MMIC Millimeter Wave Doubler MMD-3567L Copyright © 2019 Marki Microwave, Inc. P a g e 1 | R e v . A Module 1. Device Overview
1.1 General Description
The MMD-3567L is a MMIC millimeter wave doubler fabricated with GaAs Schottky diodes. This operates over a guaranteed 17.5 to 33.5 GHz input frequency range or a doubled output frequency range of 35 to 67 GHz. This doubler is a bandlimited version of the MMD-3580L. The sister die version, MMD- 3580LCH, is capable of operating beyond 80GHz. Both the wire bondable die and connectorized units are available.
1.2 Features
▪ High fundamental rejection ▪ Millimeter wave output frequencies ▪ Low +7 dBm minimum input drive
1.3 Applications
▪ High frequency synthesis ▪ LO signal chain
1.4 Functional Block Diagram
1.5 Part Ordering Options1
Number Description Package Green Status Product Lifecycle Export Classification MMD-3567LU Connectorized module, 1.85 mm connector output U RoHS Active EAR99 1 Refer to our website for a list of definitions for terminology presented in this table.
www.markimicrowave.com MMD-3567L Copyright © 2019 Marki Microwave, Inc. P a g e 2 | R e v . A Table of Contents 3.3 Recommended Operating Conditions . 4
Revision History
Revision Code Revision Date Comment - February 2018 Datasheet Initial Release A February 2019 Updated output return loss
www.markimicrowave.com MMD-3567L Copyright © 2019 Marki Microwave, Inc. P a g e 3 | R e v . A 2. Port Configurations and Functions
2.1 Port Diagram
A top-down view of the MMD-3567L’s S package outline drawing is shown below. The MMD-3567L should only be used in the forward direction, with the input and output ports given in Port Functions.
2.2 Port Functions
Port Function Description Equivalent Circuit for Package Port 1 Input Port 1 is DC open for the U package. Port 2 Output Port 2 is DC open for the U package. GND Ground U package ground provided through metal housing and outer coax conductor.
www.markimicrowave.com MMD-3567L Copyright © 2019 Marki Microwave, Inc. P a g e 4 | R e v . A 3. Specifications
3.1 Absolute Maximum Ratings
The Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. If these limits are exceeded, the device may be inoperable or have a reduced lifetime. Parameter Maximum Rating Units Port 1 DC Current TBD mA Port 2 DC Current TBD mA Power Handling, at any Port +TBD dBm Operating Temperature -55 to +100 °C Storage Temperature -65 to +125 ºC
3.2 Package Information
ESD Human Body Model (HBM), per MIL-STD-750, Method 1020 TBD Weight U Package 10 g
3.3 Recommended Operating Conditions
The Recommended Operating Conditions indicate the limits, inside which the device should be operated, to guarantee the performance given in Electrical Specifications Operating outside these limits may not necessarily cause damage to the device, but the performance may degrade outside the limits of the electrical specifications. For limits, above which damage may occur, see Absolute Maximum Ratings. Min Nominal Max Units TA, Ambient Temperature -55 +25 +100 °C Input Power +7 +11 dBm
3.4 Sequencing Requirements
There is no requirement to apply power to the ports in a specific order. However, it is recommended to provide a 50Ω termination to each port before applying power. This is a passive diode doubler that requires no DC bias.
www.markimicrowave.com MMD-3567L Copyright © 2019 Marki Microwave, Inc. P a g e 5 | R e v . A
3.5 Electrical Specifications
The electrical specifications apply at TA=+25°C in a 50Ω system. Typical data shown is for the connectorized U package doubler used in the forward direction with a +8 dBm sine wave input. Min and Max limits apply only to our connectorized units and are guaranteed at TA=+25°C. RF testing of our die is performed on a sample basis to verify conformance to datasheet guaranteed specifications. Parameter Test Conditions Min Typical Max Units Input (Port 1) Frequency Range 17.5 33.5 GHz Output (Port 2) Frequency Range 35 67 Input Power +7 +11 dBm 2F Conversion Loss (CL) Input = 17.5 - 33.5 GHz Output = 35 - 67 GHz 11 15 dB Suppression2,3 1F Input = 17.5 - 40 GHz Output = 17.5 - 40 GHz 38 dBc 3F Input = 17.5 – 22.3 GHz Output = 52.5 - 67 GHz 44 4F Input = 15 – 16.8 GHz Output = 60 - 67 GHz 21 Isolations4 1F Input = 17.5 - 40 GHz Output = 17.5 - 40 GHz 47.7 dB 3F Input = 17.5 – 22.3 GHz Output = 52.5 - 67 GHz 54.4 4F Input = 15 – 16.8 GHz Output = 60 - 67 GHz 31
2 Suppressions and isolations measured with an input source with >70dBc (relative to fundamental
input) harmonic suppression
3 Suppression is defined as the harmonic power relative to the 2F doubled output power
4 Isolation is defined as the harmonic power relative to the 1F fundamental input power.
www.markimicrowave.com MMD-3567L Copyright © 2019 Marki Microwave, Inc. P a g e 6 | R e v . A
3.6 Typical Performance Plots
www.markimicrowave.com MMD-3567L Copyright © 2019 Marki Microwave, Inc. P a g e 7 | R e v . A
www.markimicrowave.com MMD-3567L Marki Microwave reserves the right to make changes to the product(s) or information contained herein without notice. Marki Microwave makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Marki Microwave assume any liability whatsoever arising out of the use or application of any product. © Marki Microwave, Inc. 4. Mechanical Data