DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
© 2017 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com MMC SERIES Page 1 MMC SERIES\\022017\\Q1 COAX SWITCHES Miniature Matrix: MMC Series Controlled with USB or Ethernet ELECTRICAL CHARACTERISTICS (SWITCHES ONLY) Form Factor Multi-Throw, break before make Frequency Range Up to DC-40 GHz Characteristic Impedance 50 Ohms Operate Time 15 ms (max.) Release Time 15 ms (max.) Actuation Voltage Available 24 Vdc Actuation Current, max. @ ambient 170 mA/switch ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS Operating Temperature –40°C to 65°C Standard Actuator Life 5,000,000 cycles Connector Type SMA, 2.9mm Weight Non-Terminated
1 Switch
2 Switches
26 oz. (737 g) (max.) 32 oz. (907 g) (max.) Weight Terminated 54 oz. (1531 g) (max.) 60 oz. (1701 g) (max.) PART NUMBER DESCRIPTION The MMC Series is an ideal solution that consists of multi-throw, electromechanical coaxial switches designed to switch a microwave signal from a common input to any of 3, 4, 5, 6, 7 or 8 outputs. The characteristic impedance is 50 Ohms. With the normally open actuator, all paths are open when the switch is de-energized. The MMC Series is designed to allow the remote operation of 1 to 2 Single Pole Multi Throw switches. Remote operation is accomplished via TCP/IP commands to the Matrix’s Ethernet interface. Switch control is also accessible via the USB virtual serial port, using the provided command set. Through these interfaces the Coax Switch can be switched to the desired position and its position can be read for verifi cation. The default switch position at power up can be set by the user. The MMC will feature a graphical user interface (GUI), which will enable user to control switches through graphical icons and visuals. * Only available in Normally Open Models, up to 18GHz See Page 5, for Part Number List for switches used ** Only available in Enclosure B ADDITIONAL INFORMATION Interface USB or TCP/IP Host Operating System Windows, MAC, Linux Operating System Embedded INCLUDED ITEMS
- AC/DC Power Adapter • USB Cable
- Power Cord • Installation CD
- Ethernet Cable BUILD YOUR BOX Frequency Range (Select One): Remote Control (Select One): Number of Throws (Select One): SP3T SP5T SP4T SP6T SP7T* SP8T* Number of Switches (Select One): USB Only USB & Ethernet DC-18GHz DC-26.5GHz DC-40GHz TYPICAL RF CHARACTERISTICS Frequency DC–6 GHz 6–12 GHz 12–18 GHz 18–26.5 GHz 26.5–34 GHz* (40 Option) 34-40 GHz* (40 Option) Isolation, dB, typ.. 70 60 60 50 50 50 For speci fi c RF performance data please refer to Coax Switch Part number list in Glossary (page 5) Non-Terminated (Enclosure A) Terminated (Enclosure B) 1 (Enclosure A) 1 (Enclosure B) 2 (Enclosure A) 2 (Enclosure B) Actuation Type (Select One): Normally Open Latching** For additional options, please contact factory.
MMC SERIES Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2016 TELEDYNE COAX SWITCHES MMC SERIES\\052016\\Q2 COAX SWITCHES Miniature Matrix: MMC Series Controlled with USB or Ethernet MECHANICAL OUTLINE FOR ENCLUSRE A FRONT VIEW BLOCK DIAGRAM EXAMPLE MICROCONTROLLER TCP/IP USB
24 DC Input
Enclosure A: UP TO 2 NON-TERMINATED SPMT SWITCHES Max. Length with Switches= 7.75 (196.85)
© 2017 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com MMC SERIES Page 3 MMC SERIES\\022017\\Q1 COAX SWITCHES Miniature Matrix: MMC Series Controlled with USB or Ethernet MECHANICAL OUTLINE FOR ENCLUSRE B Enclosure B: UP TO 2 TERMINATED SP3T to SP6T SWITCHES
MMC SERIES Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2016 TELEDYNE COAX SWITCHES MMC SERIES\\052016\\Q2 COAX SWITCHES Miniature Matrix: MMC Series Controlled with USB or Ethernet MECHANICAL OUTLINE FOR ENCLUSRE B Enclosure B: UP TO 2 TERMINATED SP7T to SP8T SWITCHES ORDERING CODE F = Failsafe, L = Latching
2 F L - HF40T
# of Switches # of Throws: C = 3 D = 4 E = 5 F = 6 G = 7 H = 8 Options Example: Options None = SMA DC-18GHz T = Terminated (can stack) HF26 = SMA DC-26.5GHz HP40 = 2.92 mm DC-40GHz
© 2017 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com MMC SERIES Page 5 MMC SERIES\\022017\\Q1 COAX SWITCHES Miniature Matrix: MMC Series Controlled with USB or Ethernet Actuator An actuator is the electromechanical mechanism that transfers the RF contacts from one position to another upon DC command. Ethernet A high-speed interface used in local area networks (LAN). Ethernet is also known as IEEE 802.3 standard. DHCP or Static IP can be confi gured through a web interface. Isolation Isolation is the measure of the power level at the output connector of an unconnected RF channel as referenced to the power at the input connector. It is speci fi ed in dB below the input power level. Magnetic Sensitivity An electro-mechanical switch can be sensitive to ferrous materials and external magnetic fi elds. Neighboring ferrous materials should be permitted no closer than 0.5 inches and adjacent external magnetic fi elds should be limited to a fl ux density of less than 5 Gauss. Multi-Throw Switch A multi-throw switch is a switch with one input and three or more output ports. The SPMT can switch a microwave signal to any of 2, 3, 4, 5, 6, 7 or 8 outputs from a single common input. Performance Parameters vs Frequency Generally speaking, the RF performance of coaxial switches is frequency dependent. With increasing frequency, VSWR and insertion loss increase while isolation decreases. All data sheets specify these three parameters as “worst case” at the highest operating frequency. If the switch is to be used over a narrow frequency band, better performance can be achieved. Switching Time Switching time is the total interval beginning with the arrival of the leading edge of the command pulse at the switch DC input and ending with the completion of the switch transfer, including contact bounce. It consists of three parts: (1) inductive delay in the coil, (2) transfer time of the physical movement of the contacts, and (3) the bounce time of the RF contacts. This does not include time added by the communication interface, application or operating system. Universal Serial Bus (USB) An industry standard that de fi nes the cables, connectors and communication protocols used in a bus for connection, communication and power supply between computers and electronic devices. VCP Driver available for Windows OS, Mac OS, and Linux. Termination When not connected to the common port, RF ports are shunted to ground via a 50Ω path, rated for 1W. GLOSSARY Part Number List (Non-Terminated) SP3T to SP6T Frequency Series Link DC-18GHz CCR-38S http://www.teledynecoax.com/pdf/coaxialswitches/CCR-38S_CR-38S%20NORMALLY%20OPEN.pdf DC-26.5GHz CCR-58S http://www.teledynecoax.com/pdf/coaxialswitches/CCR-58S_CR-58S%20NORMALLY%20OPEN.pdf DC-40GHz CCR-48K http://www.teledynecoax.com/pdf/coaxialswitches/CCR-48K_NORMALLY_OPEN.pdf Part Number List (Terminated) SP3T to SP6T Frequency Series Link DC-18GHz CCT-38S http://www.teledynecoax.com/pdf/coaxialswitches/CCT-38S_CT-38S%20NORMALLY%20OPEN.pdf DC-26.5GHz CCT-58S http://www.teledynecoax.com/pdf/coaxialswitches/CCT-58S_CT-58S%20NORMALLY%20OPEN.pdf DC-40GHz CCT-49K http://www.teledynecoax.com/rfswitches/SwitchPdf/CCT-49K_LATCHING.pdf Part Number List (Non-Terminated) SP7T to SP8T Frequency Series Link DC-18GHz CCR-58S http://www.teledynecoax.com/pdf/coaxialswitches/CCR-58S_SP8T_NORMALLY_OPEN.pdf Part Number List (Terminated) SP7T to SP8T Frequency Series Link DC-18GHz CCT-58S http://www.teledynecoax.com/pdf/coaxialswitches/CCT-58S%20SP8T%20NORMALLY%20OPEN.pdf