DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

© 2016 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com MMB SERIES Page 1 MMB SERIES\\052016\\Q2 Miniature Matrix: MMB Series Controlled with USB or EthernetCOAX SWITCHES ELECTRICAL CHARACTERISTICS (SWITCHES ONLY) Form Factor DPDT, break before make Frequency Range DC-18GHz Characteristic Impedance 50 Ohms Operate Time 15 ms (max.) Release Time 15 ms (max.) Actuation Voltage 24 Vdc Actuation Current, max. @ ambient 250 mA/switch ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS Operating Temperature –40°C to 65°C Standard Actuator Life 5,000,000 cycles Connector Type SMA Weight Enclosure A

1 Switch

2 Switches

22 oz. (624 g) (max.) 24 oz. (680 g) (max.) Weight Enclosure B 4 Switches 64 oz. (1814 g) (max.) PERFORMANCE LIMITS Frequency DC–6 GHz 6–12 GHz 12–18 GHz Insertion Loss, dB, max. 0.20 0.40 0.50 Isolation, dB, min. 70 60 60 VSWR , max. 1.25:1 1.40:1 1.50:1 PART NUMBER DESCRIPTION The MMB Series is an ideal solution that consists of Transfer, electromechanical coaxial switches designed to switch a microwave signals in a DPDT con fi gration. The characteristic impedance is 50 Ohms. The MMB Series is designed to allow the remote operation of 1 to 4 Transfer switches. Remote operation is accomplished via TCP/IP commands to the Matrix’s Ethernet interface. Switch control is also accessible via the USB virtual serial port, using the provided command set. Through these interfaces the Coax Switch can be switched to the desired position and its position can be read for verifi cation. The default switch position at power up can be set by the user. The MMB will feature a graphical user interface (GUI), which will enable user to control switches through graphical icons and visuals. ADDITIONAL INFORMATION Interface USB or TCP/IP Host Operating System Windows, MAC, Linux Operating System Embedded INCLUDED ITEMS

  • AC/DC Power Adapter • USB Cable
  • Power Cord • Installation CD
  • Ethernet Cable BUILD YOUR BOX Number of Switches (Select One): ENCLOSURE A ENCLOSURE B Remote Control (Select One): Frequency Range (Select One): DC-18GHz USB Only USB & Ethernet For additional RF performance data please refer to Coax Switch Part number list in Glossary (page 4) Actuation Type (Select One): Failsafe Latching See Page 4, for Part Number List for switches usedFor additional options, please contact factory. DC-26.5GHz

MMB SERIES Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2016 TELEDYNE COAX SWITCHES MMB SERIES\\052016\\Q2 Miniature Matrix: MMB Series Controlled with USB or Ethernet COAX SWITCHES BLOCK DIAGRAM EXAMPLE MICROCONTROLLER TCP/IP USB

24 DC Input

MECHANICAL OUTLINE FOR ENCLOSURE A Enclosure A: UP TO 2 TRANSFER SWITCHES Max. Length with Switches= 7.75 (196.85)

© 2016 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com MMB SERIES Page 3 MMB SERIES\\052016\\Q2 Miniature Matrix: MMB Series Controlled with USB or EthernetCOAX SWITCHES MECHANICAL OUTLINE FOR ENCLOSURE B Enclosure B: UP TO 4 TRANSFER SWITCHES (.875) [22.2] (1.46) [37.1] (.50) [12.7]

MMB SERIES Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2016 TELEDYNE COAX SWITCHES MMB SERIES\\052016\\Q2 Miniature Matrix: MMB Series Controlled with USB or Ethernet COAX SWITCHES Actuator An actuator is the electromechanical mechanism that transfers the RF contacts from one position to another upon DC command. Ethernet A high-speed interface used in local area networks (LAN). Ethernet is also known as IEEE 802.3 standard. Isolation Isolation is the measure of the power level at the output connector of an unconnected RF channel as referenced to the power at the input connector. It is speci fi ed in dB below the input power level. Magnetic Sensitivity An electro-mechanical switch can be sensitive to ferrous materials and external magnetic fi elds. Neighboring ferrous materials should be permitted no closer than 0.5 inches and adjacent external magnetic fi elds should be limited to a fl ux density of less than 5 Gauss. Performance Parameters vs Frequency Generally speaking, the RF performance of coaxial switches is frequency dependent. With increasing frequency, VSWR and insertion loss increase while isolation decreases. All data sheets specify these three parameters as “worst case” at the highest operating frequency. If the switch is to be used over a narrow frequency band, better performance can be achieved. Switching Time Switching time is the total interval beginning with the arrival of the leading edge of the command pulse at the switch DC input and ending with the completion of the switch transfer, including contact bounce. It consists of three parts: (1) inductive delay in the coil, (2) transfer time of the physical movement of the contacts, and (3) the bounce time of the RF contacts. This does not include time added by the communication interface, application or operating system. Universal Serial Bus (USB) An industry standard that de fi nes the cables, connectors and communication protocols used in a bus for connection, communication and power supply between computers and electronic devices. TRANSFER Switch A four-port switch consisting of two independent pairs of RF paths. These pairs are actuated simultaneously. This actuation is similar to that of a double-pole double-throw switch. GLOSSARY Part Number List Frequency Series Link DC-18GHz CCS-37S http://www.teledynecoax.com/pdf/coaxialswitches/CCS-37S_CS-37S%20FAILSAFE.pdf