DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

© 2017 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com MMA SERIES Page 1 MMA SERIES\\062017\\Q2 COAX SWITCHES Miniature Matrix: MMA Series Controlled with USB or Ethernet ELECTRICAL CHARACTERISTICS (SWITCHES ONLY) Form Factor SPDT, break before make Frequency Range Up to DC-40 GHz Characteristic Impedance 50 Ohms, 75 Ohms (SMB only) Operate Time 15 ms (max.) Release Time 15 ms (max.) Actuation Voltage 24 Vdc Actuation Current, max. @ ambient Varies ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS Operating Temperature –40°C to 65°C Standard Actuator Life 5,000,000 cycles Connector Type SMA, 2.92mm, N, TNC, SMB Weight Non-Terminated

1 Switch

2 Switches

4 Switches

18 oz. (510 g) (max.) 20 oz. (567 g) (max.) 23 oz. (652 g) (max.) Weight Terminated 60 oz. (1701 g) (max.) 62 oz. (1758 g) (max.) 64 oz. (1814 g) (max.) PART NUMBER DESCRIPTION The MMA Series is an ideal solution that consists of SPDT, electromechanical coaxial switches designed to switch a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The terminated option provides an impedance match for the unselected port. The MMA Series is designed to allow the remote operation of 1 to 4 Single Pole Double Throw switches. Remote operation is accomplished via TCP/IP commands to the Matrix’s Ethernet interface. Switch control is also accessible via the USB virtual serial port, using the provided command set. Through these interfaces the Coax Switch can be switched to the desired position and its position can be read for verifi cation. The default switch position at power up can be set by the user. The MMA will feature a graphical user interface (GUI), which will enable user to control switches through graphical icons and visuals. ADDITIONAL INFORMATION Interface USB or TCP/IP Host Operating System Windows, Mac, Linux Operating System Embedded INCLUDED ITEMS

  • AC/DC Power Adapter • USB Cable
  • Power Cord • Installation CD
  • Ethernet Cable BUILD YOUR BOX Number of Switches (Select One): Connector (Select One): Remote Control (Select One): USB Only USB & Ethernet Non-Terminated Terminated 1 (Enclosure A) 1 (Enclosure A) 2 (Enclosure A or B) 2 (Enclosure A) 4 (Enclosure A or B) 4 (Enclosure B) SMA (DC-18GHz) SMA (DC-26.5GHz) SMB (DC-3GHz) N (DC-12GHz) TNC (DC-11GHz) K (DC-33GHz) K (DC-40GHz) Actuation Type (Select One): Failsafe Latching * Only available in Non-Terminated Models See Page 4, for Part Number List for switches usedFor additional options, please contact factory.

MMA SERIES Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2017 TELEDYNE COAX SWITCHES MMA SERIES\\062017\\Q2 COAX SWITCHES Miniature Matrix: MMA Series Controlled with USB or Ethernet MECHANICAL OUTLINE FOR ENCLOSURE A BLOCK DIAGRAM EXAMPLE MICROCONTROLLER TCP/IP USB

24 DC Input

Enclosure A : UP TO 4 NON-TERMINATED SPDT SWITCHES (SMA, K, SMB) Enclosure A : UP TO 2 TERMINATED SPDT SWITCHES (SMA-T) Max. Length with Switches= 7.75 (196.85)

© 2017 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com MMA SERIES Page 3 MMA SERIES\\062017\\Q2 COAX SWITCHES Miniature Matrix: MMA Series Controlled with USB or Ethernet MECHANICAL OUTLINE FOR ENCLOSURE B Enclosure B: UP TO 4 TERMINATED SPDT SWITCHES (SMA-T Only) (.875) [22.2] (1.46) [37.1] (.50) [12.7]

MMA SERIES Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2017 TELEDYNE COAX SWITCHES MMA SERIES\\062017\\Q2 COAX SWITCHES Miniature Matrix: MMA Series Controlled with USB or Ethernet Enclosure B: UP TO 4 TERMINATED SPDT SWITCHES (SMA Only) Enclosure B: UP TO 4 TERMINATED SPDT SWITCHES (Type N Connector Only)

© 2017 TELEDYNE RELAYS (800) 284-7007 • www.teledynecoax.com MMA SERIES Page 5 MMA SERIES\\062017\\Q2 COAX SWITCHES Miniature Matrix: MMA Series Controlled with USB or Ethernet Actuator An actuator is the electromechanical mechanism that transfers the RF contacts from one position to another upon DC command. Ethernet A high-speed interface used in local area networks (LAN). Ethernet is also known as IEEE 802.3 standard. DHCP or Static IP can be confi gured through a web interface. Isolation Isolation is the measure of the power level at the output connector of an unconnected RF channel as referenced to the power at the input connector. It is speci fi ed in dB below the input power level. Magnetic Sensitivity An electro-mechanical switch can be sensitive to ferrous materials and external magnetic fi elds. Neighboring ferrous materials should be permitted no closer than 0.5 inches and adjacent external magnetic fi elds should be limited to a fl ux density of less than 5 Gauss. Performance Parameters vs Frequency Generally speaking, the RF performance of coaxial switches is frequency dependent. With increasing frequency, VSWR and insertion loss increase while isolation decreases. All data sheets specify these three parameters as “worst case” at the highest operating frequency. If the switch is to be used over a narrow frequency band, better performance can be achieved. SPDT Switch A single-pole double-throw, bi-directional switch that can be used as having one input and two outputs or two inputs and one output. Switching Time Switching time is the total interval beginning with the arrival of the leading edge of the command pulse at the switch DC input and ending with the completion of the switch transfer, including contact bounce. It consists of three parts: (1) inductive delay in the coil, (2) transfer time of the physical movement of the contacts, and (3) the bounce time of the RF contacts. This does not include time added by the communication interface, application or operating system. Universal Serial Bus (USB) An industry standard that de fi nes the cables, connectors and communication protocols used in a bus for connection, communication and power supply between computers and electronic devices. VCP Driver available for Windows OS, Mac OS, and Linux. Termination When not connected to the common port, RF ports are shunted to ground via a 50Ω path, rated for 1W. GLOSSARY Switch Speci fi cation List Connector Frequency Series Link SMA DC-18GHz CCR-33S http://www.teledynecoax.com/pdf/coaxialswitches/CCR-53S_CR-53S%20FAILSAFE.pdf SMA DC-18GHz CCS-37S http://www.teledynecoax.com/pdf/coaxialswitches/CCS-37S_FAILSAFE_SHORT.pdf SMA DC-26.5GHz CCR-53S http://www.teledynecoax.com/pdf/coaxialswitches/CCR-33S_CR-33S%20FAILSAFE.pdf SMA DC-26.5GHz CCRT-53S http://www.teledynecoax.com/pdf/coaxialswitches/CCRT-53S_CRT-53S%20FAILSAFE.pdf 2.92mm DC-33GHz CCR-33K http://www.teledynecoax.com/pdf/coaxialswitches/CCR-33K_CR-33K%20FAILSAFE.pdf 2.92mm DC-40GHz CCR-40K http://www.teledynecoax.com/pdf/coaxialswitches/CCR-40K%20FAILSAFE.pdf SMB DC-3GHz CCR-33M http://www.teledynecoax.com/pdf/coaxialswitches/CCR-33M_CR-33M%20FAILSAFE.pdf N, TNC DC-12GHz CCS-32 http://www.teledynecoax.com/pdf/coaxialswitches/CCS-32_CS-32%20FAILSAFE.pdf ORDERING CODE F = Failsafe, L = Latching

4 A F - HF26T

# of Switches A = SPDT Options Example: Options None = SMA DC-18GHz T = Terminated SMB = SMB connectors HF## = High Frequency (GHz) HPN = High Power Type N connectors HPT = High Power TNC connectors