MEQ11-20ASM

MEQX-20ASM MARKIMICROWAVE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Passive GaAs MMIC 20 GHz Equalizer Family MEQX-20ASM Copyright © 2019 Marki Microwave, Inc. P a g e 1 | R e v . E QFN

1 Device Overview

1.1 General Description

The MEQX-20ASM family of passive MMIC equalizer QFN are an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems. They provide positive slope from DC to 20GHz with DC attenuation options between 3 and 11dB. The unique design offers superior return loss to competitors. GaAs MMIC technology provides consistent unit-to-unit performance in a small, low cost form factor.

1.2 Features

▪ DC attenuation options from 3 to 11dB ▪ Typical Insertion Loss 1.2 dB at 20GHz ▪ VSWR < 1.5:1 Over Entire Band ▪ S2P data: MEQX-XASM.zip

1.3 Applications

▪ RF Transceivers ▪ High-Speed Data ▪ Telecom ▪ Cable Loss Compensation ▪ Amplifier Compensation

1.4 Functional Block Diagram

1.5 Part Ordering Options1

DC (dB) Description Package Green Status Product Lifecycle Export Classification MEQ3-20ASM 3 3x3 mm QFN SM RoHS Active EAR99 MEQ5-20ASM 5 MEQ6-20ASM 6 MEQ7-20ASM 7.4 MEQ10-20ASM 10 MEQ11-20ASM 11 EVAL-MEQ3-20A 3 Connectorized Eval Module Module EVAL-MEQ5-20A 5 EVAL-MEQ6-20A 6 EVAL-MEQ7-20A 7.4 EVAL-MEQ10-20A 10 EVAL-MEQ11-20A 11 1 Refer to our website for a list of definitions for terminology presented in this table. INPUT OUTPUT

www.markimicrowave.com MEQX-20ASM Copyright © 2019 Marki Microwave, Inc. P a g e 2 | R e v . E Table of Contents 3.4.2 Return Loss & Group Delay .. 6

Revision History

Revision Code Revision Date Comment - June 27, 2018 Datasheet Initial Release A August 2018 Added §4.2, EVAL Outline B November 2018 Updated §4.2, EVAL Outline C March 2019 Added ESD Rating D May 2019 Corrected Table in 4.1, Added Package Dimension Tolerance Spec E August 2019 Added §4.2, SM Footprint

www.markimicrowave.com MEQX-7ASM Copyright © 2019 Marki Microwave, Inc. P a g e 3 | R e v . E

2 Port Configurations and Functions

2.1 Port Diagram

A top-down view of the MEQX-20ASM package outline drawing is shown below. The MEQ equalizers are symmetrical allowing Port 1 or Port 2 to be used as the input.

2.2 Port Functions

Port Function Description Equivalent Circuit Pin 1 Input/Output Port 1 is DC connected to ground through a resistor. DC block is required if voltage present. Pin 9 Input/Output Port 2 is DC connected to ground through a resistor. DC block is required if voltage present. GND Ground SM package ground path is provided through the ground paddle. INCH [MM] PROJECTION .114 [2.90] .114 [2.90] .031 [.78] .059 [1.50] .020 Typ [.50] .012 Typ [.30] .013 Typ [.32] .003 Typ [.08] MEQ 63XX YYWW 11 1210 Ground Paddle

www.markimicrowave.com MEQX-7ASM Copyright © 2019 Marki Microwave, Inc. P a g e 4 | R e v . E

3 Specifications

3.1 Absolute Maximum Ratings

The Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. If these limits are exceeded, the device may be inoperable or have a reduced lifetime. Parameter Maximum Rating Units Port 1 DC Current 40 mA Port 2 DC Current 40 mA Power Handling, at any Port +30 dBm Operating Temperature -55 to +100 °C Storage Temperature -65 to +125 ºC

3.2 Package Information

ESD Human Body Model (HBM), per MIL-STD-750, Method 1020 1A

3.3 Electrical Specifications2

The electrical specifications apply at TA=+25°C in a 50Ω system. Typical data shown is for the equalizer in a SM package with a sine wave input applied to port 1. Min and Max limits are guaranteed at TA=+25°C. All bare die are 100% DC tested and visually inspected. Part Number Typical Insertion Loss Typical Return Loss Units DC 20 GHz DC-14 GHz MEQ3-20ASM 3 1 19 dB MEQ5-20ASM 5 1.1 22 dB MEQ6-20ASM 6 1 23 dB MEQ7-20ASM 7.5 1.1 26 dB MEQ10-20ASM 10 0.9 20 dB MEQ11-20ASM 11 1.2 27 dB 2 Equalizer is symmetrical. Reverse measurement is equivalent to forward measurement. All measurements taken in eval board without de-embedding.

www.markimicrowave.com MEQX-7ASM Copyright © 2019 Marki Microwave, Inc. P a g e 5 | R e v . E

3.4 Typical Performance Plots

3.4.1 Insertion Loss

-14 -12 -10 0 2 4 6 8 10 12 14 16 18 20 22 24 26 Insertion Loss (dB) Frequency (GHz) MEQ3-20ASM MEQ6-20ASM MEQ10-20ASM MEQ5-20ASM MEQ7-20ASM MEQ11-20ASM

www.markimicrowave.com MEQX-7ASM Copyright © 2019 Marki Microwave, Inc. P a g e 6 | R e v . E

3.4.2 Return Loss & Group Delay3

3 Group delay measured in eval board without de-embedding. -40 -35 -30 -25 -20 -15 -10 0 2 4 6 8 10 12 14 16 18 20 Return Loss (dB) Frequency (GHz) MEQ3-20ASM -40 -35 -30 -25 -20 -15 -10 0 2 4 6 8 10 12 14 16 18 20 Return Loss (dB) Frequency (GHz) MEQ5-20ASM -40 -35 -30 -25 -20 -15 -10 0 2 4 6 8 10 12 14 16 18 20 Return Loss (dB) Frequency (GHz) MEQ6-20ASM 100 110 120 130 140 150 160 170 180 190 200 0 2 4 6 8 10 12 14 16 18 20 Group Delay (ps) Frequency (GHz) MEQ5-20ASM 100 110 120 130 140 150 160 170 180 190 200 0 2 4 6 8 10 12 14 16 18 20 Group Delay (ps) Frequency (GHz) MEQ6-20ASM -40 -35 -30 -25 -20 -15 -10 0 2 4 6 8 10 12 14 16 18 20 Return Loss (dB) Frequency (GHz) MEQ7-20ASM 100 110 120 130 140 150 160 170 180 190 200 0 2 4 6 8 10 12 14 16 18 20 Group Delay (ps) Frequency (GHz) MEQ7-20ASM

www.markimicrowave.com MEQX-7ASM Copyright © 2019 Marki Microwave, Inc. P a g e 7 | R e v . E -40 -35 -30 -25 -20 -15 -10 0 2 4 6 8 10 12 14 16 18 20 Return Loss (dB) Frequency (GHz) MEQ10-20ASM 100 110 120 130 140 150 160 170 180 190 200 0 2 4 6 8 10 12 14 16 18 20 Group Delay (ps) Frequency (GHz) MEQ10-20ASM -40 -35 -30 -25 -20 -15 -10 0 2 4 6 8 10 12 14 16 18 20 Return Loss (dB) Frequency (GHz) MEQ11-20ASM 100 110 120 130 140 150 160 170 180 190 200 0 2 4 6 8 10 12 14 16 18 20 Group Delay (ps) Frequency (GHz) MEQ11-20ASM

www.markimicrowave.com MEQX-7ASM Copyright © 2019 Marki Microwave, Inc. P a g e 8 | R e v . E

4 Mechanical Data

4.1 SM Package Outline Drawing

Unless otherwise specified, dimensions are in inches. Tolerances are: .XX ±.02 .XXX ±.005 1. Substrate material is ceramic. 2. I/O Leads and Ground Paddle plating is (from base to finish): Ni: 8.89um MAX 1.27um MIN Pd: 0.17um MAX 0.07um MIN Au 0.254um MAX 0.03um MIN 3. All unconnected pads should be connected to PCB RF ground.

4.2 SM Package Footprint

SM-Package Surface-Mount Landing Pattern Click here for a DXF of the above layout. Click here for leaded solder reflow. Click here for lead-free solder reflow INCH [MM] PROJECTION .114 [2.90] .114 [2.90] .031 [.78] .059 [1.50] .020 Typ [.50] .012 Typ [.30] .013 Typ [.32] .003 Typ [.08] MEQ 63XX YYWW 11 1210 Ground Paddle Part Number Circuit Number MEQ3-20ASM 6339 MEQ6-20ASM 6340 MEQ10-20ASM 6341 MEQ5-20ASM 6342 MEQ7-20ASM 6343 MEQ11-20ASM 6345

www.markimicrowave.com MEQX-20ASM Marki Microwave reserves the right to make changes to the product(s) or information contained herein without notice. Marki Microwave makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Marki Microwave assume any liability whatsoever arising out of the use or application of any product. © Marki Microwave, Inc.

4.3 Eval Package Outline Drawing

Unless otherwise specified, dimensions are in inches. Tolerances are: .XX ±.02 .XXX ±.005