M914 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Page 1 of 4 Feb 14, 2023 | Rev g | Doc: DS_M914 Series M914 SERIES AC/DC LINEAR POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M914 SERIES AC/DC LINEAR POWER SUPPLY PRODUCT HIGHLIGHTS
- MINIATURE
- HIGH DENSITY
- 3-PHASE 400HZ INPUT
- SINGLE/DUAL OUTPUT
- UP TO 90 W
Page 2 of 4 Feb 14, 2023 | Rev g | Doc: DS_M914 Series M914 SERIES AC/DC LINEAR POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Applications
Military, Ruggedized, Telecom, Industrial Special Features
- Miniature size
- Low noise non-switching linear regulator
- High Reliability Components
- Input / Output isolation
- EMI filters included
- Indefinite short circuit protection with
- auto-recovery
- Over Voltage Protection Environmental Meets or exceeds MIL-STD- 810D Temperature: Operating -55°C to +85°C (baseplate) Storage -55°C to +125°C Reliability 150'000 hours, calculated per MIL-STD-217F at +85°C baseplate, ground fixed. Electrical Specifications AC INPUT AC Input range: 115VAC, 3-Phase, 400 Hz EMC: Designed to meet or exceed MIL-STD-461D: CE03, CE07 RE02 RS02, RS03 CS01, CS02, CS06 Isolation: 500V between Input and Output 500V between Input and Case DC OUTPUT (floating) Line/Load regulation: Less than 1% (No load to full load, -40C to +90C) Ripple and Noise: 30 mVp-p, typical (max. 1%) Current limiting (Fold Back): Continuous protection for unlimited time Overvoltage protection: Passive tranzorb on outputs. Isolation: 500V between Output and Input 100V between Output and Case
Page 3 of 4 Feb 14, 2023 | Rev g | Doc: DS_M914 Series M914 SERIES AC/DC LINEAR POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Typical Pin Assignment for Single Output Outline Drawing Single Output
Page 4 of 4 Feb 14, 2023 | Rev g | Doc: DS_M914 Series M914 SERIES AC/DC LINEAR POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Typical Pin Assignment for Dual Output Outline Drawing Dual Output Notes 1. Dimensions are in Inches [mm] 2. Tolerance is: .XX ±0.01 IN .XXX ±0.005 IN 3. Weight (Typical): 33Oz (950gr) 4. Add suffix “S” for side connector model (replacing the top connector) *Specifications are subject to change without prior notice by the manufacturer.