M7019 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 9
Technical content
Page 1 of 9 Sep 29, 2021 | Rev (b) | Doc: M7019 Series M7019 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M7019 SERIES DC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- DC/DC POWER SUPPLY
- SINGLE OUTPUT
- UP TO 100 W
- MINIATURE
- HIGH DENSITY
Page 2 of 9 Sep 29, 2021 | Rev (b) | Doc: M7019 Series M7019 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Special Features
- Miniature size
- High efficiency
- Input / Output isolation
- Fixed switching freq.
- EMI filters included
- Remote inhibit (On/Off)
- Non-latching protections: o Input under/over voltage o Overload/Short-circuit o Over temperature Electrical Specifications DC Input Standard Version Normal steady-state voltage range: 18 to 48 VDC DC Output Voltage range: 3.3 to 56 V Current range: 0 to 15 A Power range: 0 to 100 W Isolation Input to Output: 200 VDC Input to Case: 200 VDC Output to Case: 100 VDC Extended Input Option– please consult factory. IAW MIL-STD-1275E (12 to 100 VDC) IAW MIL-STD-704A-F (6 to 80 VDC) Efficiency 87% typical (28V variant, at nominal input voltage, full load, room temperature) EMC Designed to meets* MIL-STD-461F CE101, CE102, CS101, CS114, CS115, CS116, RE101, RE102, RS101, RS103. Output voltage regulation Less than ±1% (low to high input voltage, no load to full load, –55 C to +85 C at baseplate). Ripple and Noise 100-150 mVp-p, typical (max. 1%) without external capacitance. Turn-on Transient No overshoot. * Compliance achieved with 5μH LISN, shielded harness and static resistive load.
Applications
Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Power Supply
Page 3 of 9 Sep 29, 2021 | Rev (b) | Doc: M7019 Series M7019 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Environmental Conditions Designed to meet MIL-STD-810G Temperature Methods 501.5 & 502.5 Operating: –55 C to +85 C (at baseplate) Storage: –55 C to +125 C (ambient) Vibration Method 514.6 Category 7: Aircraft – Jet, IAW figure C-6, 13.7grams, 1 hour per axis. Category 24: Minimum integrity, IAW figure E-3, 7.7 grams, 1 hour per axis. Altitude Method 500.5 Procedures I – up to 70,000 ft. (non-operational) Procedure II – up to 70,000 ft. (operational) Shock Method 516.6 Operational shock: 30 g, 11 ms, half-sine Crash safety: 100 g, 6 ms, half-sine Humidity Method 507.5 Up to 95% RH Salt Fog Method 509.5 Reliability 150,000 hours, calculated per MIL-STD-217F Notice 2 at +85C baseplate, Ground Fix environment. Thresholds and protections can be modified / removed – please consult factory. Protections Input
- Under-Voltage Lockout Standard version converter shuts if input voltage is below 16 ± 1V. For extended Input option – please consult factory.
- Over-Voltage Lockout Standard version converter shuts down if input voltage is above 53 ± 1V. For extended Input option – please consult factory.
- Reverse Polarity Protection Protection for unlimited time. Output
- Active Over-Voltage Protection Secondary control circuit takes over if output voltage exceeds 110% ± 5% of nominal voltage.
- Passive Over-Voltage Protection Transorb at output selected 20% ± 5% above nominal voltage.
- Overload / Short-Circuit Protection Output voltage turns off and on periodically with low duty-cycle (hiccup) to protect system conductors and converter from short circuit and overload. General
- Over Temperature Protection Shutdown if baseplate temperature exceeds +105 C ± 5 C. Automatic recovery upon cooldown to below +95 C ± 5 C.
Page 4 of 9 Sep 29, 2021 | Rev (b) | Doc: M7019 Series M7019 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Page 5 of 9 Sep 29, 2021 | Rev (b) | Doc: M7019 Series M7019 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Test Results CE102 MIL-STD-461F Conducted Emission, 10 kHz -150 kHz Line (nominal input voltage, full load) CE102 MIL-STD-461F Conducted Emission, 10 kHz -150 kHz Return (nominal input voltage, full load)
Page 6 of 9 Sep 29, 2021 | Rev (b) | Doc: M7019 Series M7019 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in CE102 MIL-STD-461F Conducted Emission, 150 kHz -10 MHz Line (nominal input voltage, full load) CE102 MIL-STD-461F Conducted Emission, 150 kHz -10 MHz Return (nominal input voltage, full load)
Page 7 of 9 Sep 29, 2021 | Rev (b) | Doc: M7019 Series M7019 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Functions and Signals INHIBIT (pin 8) Description: The INHIBIT signal is used to turn the power supply ON and OFF. Operation: Applying “1” or leaving open will turn the power supply ON. For constant operation, leave this pin unconnected. Applying “0” or shorting this pin to its return line will turn the power supply OFF. (Optional to change the logic of this signal. Please consult with factory.) Signal Type: 5V TTL or dry contact (open/short). Return line: This signal is referenced to INPUT RTN pin. Optional to change the logic of this signal. Please consult with the factory. SENSE (pin 2) & SENSE RTN (pin 3) Description: The SENSE is used to compensate for voltage drop across the output wires by sensing the voltage at the load and correcting the increasing the output voltage accordingly, to provide the desired voltage at the load's terminals. Operation: Connect the SENSE pin to the positive load terminal, and the SENSE RTN pin to the negative (return) load terminal. The sense compensation is typically limited to 5% or 0.5V – the lesser of the two. Note: If not used, connect SENSE directly to OUTPUT pins, and the SENSE RTN pin directly to the OUTPUT RTN pins. DO NOT LEAVE THE SENSE/SENSE RTN PINS UNCONNECTED- the output voltage will increase by 5% to 8%. Pin Assignment Connector: M24308/24-38F or eq. Mates with: M24308/2-2F or eq. Pin No. Function Pin No. Function
1 OUTPUT +
9 OUTPUT +
2 SENSE +
10 OUTPUT +
3 SENSE RTN –
11 OUTPUT +
4 OUTPUT RTN –
12 OUTPUT RTN –
5 OUTPUT RTN –
13 OUTPUT RTN –
6 INPUT RTN –
14 INPUT RTN –
7 INPUT +
15 INPUT +
8 INHIBIT +
Page 8 of 9 Sep 29, 2021 | Rev (b) | Doc: M7019 Series M7019 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Outline Drawing Notes 1. Dimensions are in inches [mm] 2. Tolerance is: .XX ± 0.02 in .XXX ± 0.010 in 3. Weight: 134 g
Page 9 of 9 Sep 29, 2021 | Rev (b) | Doc: M7019 Series M7019 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Standard Configurations This P/N can be configured to any output voltage within its possible range (see 'DC Output – Voltage range' in 'Electrical Specifications' table). Part Number Output Voltage Max Output Current Minimum Efficiency M7019-100 5 VDC 13 A 82% M7019-101 12 VDC 8 A 83% M7019-102 15 VDC 7 A 84% M7019-103 24 VDC 4 A 85% M7019-104 28 VDC 3.5 A 86% Additional standard configurations available. Consult factory for details. Note: Specifications are subject to change without prior notice by the manufacturer.