M8767 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Page 1 of 5 Nov 9, 2021 | Rev d | Doc: DS_M8767 Series M8767 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M8767 SERIES DC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- MINIATURE
- HIGH DENSITY
- SIX OUTPUTS
- DC/DC CONVERTER
- UP TO 80W
Page 2 of 5 Nov 9, 2021 | Rev d | Doc: DS_M8767 Series M8767 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Applications
Military, Ruggedized, Telecom, Industrial Special Features
- Miniature size
- High efficiency
- Wide input range
- Up to 80W, higher output available – please contact us.
- Input / Output isolation
- Fixed switching frequency (250 kHz)
- TTL logic enable
- EMI/RFI filters included
- Indefinite short circuit protection with auto- recovery
- Input over-voltage shutdown with auto- recovery
- Over temperature shutdown with auto- recovery Environmental Conditions Meets or exceeds MIL-STD-810D Temperature: Operating –55 C to +85 C (baseplate) Storage –55 C to +125 C Reliability 150,000 hours, calculated per MIL-STD-217F at +85 C baseplate, ground fixed. * EMC compliance achieved when tested with 5 μH LISNs, shielded harness and static resistive load. Electrical Specifications DC INPUT DC Input range: 18 to 48 VDC Input transient protection: All models meet or exceed (no damage) MIL-STD-1275A (100V for 50 mSec) and MIL-STD-704A, MIL-STD-704D (80V for 0.1 Sec) Over-voltage shutdown with auto-recovery Efficiency: Up to 80% EMC: Designed to meet* MIL-STD-461F CE101, CE102, CS101, CS114, CS115, CS116, RE101 RE102, RS101, RS103 Isolation: 200V between Input and Output 200V between Input and Case DC OUTPUT (floating) Line/Load regulation: Less than 1% (no load to full load, –55 C to +85 C) Ripple and Noise: 50mVp-p, typical (max. 1%) Current limiting (Foldback): Continuous protection for unlimited time Over voltage protection: Passive transorb on output. Over temperature protection: Shutdown at baseplate temperature of +100 C (5 C) Automatic recovery at baseplate temperature lower than +90 C (5 C) Isolation: 200V between Output and Input 100V between Output and Case
Page 3 of 5 Nov 9, 2021 | Rev d | Doc: DS_M8767 Series M8767 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in PIN ASSIGNMENT Standard Version * Note: The SIGNAL RTN is referred to the input. This is used as grounding for SYNC IN and INHIBIT signals OUTLINE DRAWING Standard Version *Specifications are subject to change without prior notice by the manufacturer Notes 1. Dimensions are in inches [mm] 2. Tolerance is: .XX 0.01IN .XXX 0.005 IN 3. Weight: Approx. 4.4 oz (125 g) PIN No. PIN Function 9, 24 + VIN 8, 23 VIN RTN
20 INHIBIT
5 SYN IN.
19 SIGNAL RTN
No. PIN Function 11, 26 +OUT 1 10, 25 - OUT 1 13, 28 + OUT 2 12, 27 - OUT 2 15, 30 + OUT 3 PIN No. PIN Function 14, 29 - OUT 3 7, 22 + OUT 4 6, 21 - OUT 4 4 + OUT 5 3 - OUT 5 PIN No. PIN Function 2, 17 + OUT 6 1, 16 - OUT 6
18 CHASSIS
Page 4 of 5 Nov 9, 2021 | Rev d | Doc: DS_M8767 Series M8767 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in PIN ASSIGNMENT Optimal * Note: The SIGNAL RTN is referred to the input. This is used as grounding for SYNC IN and INHIBIT signals PIN No. PIN Function 9, 24 + VIN 8, 23 VIN RTN 5 SYN IN. No. PIN Function 11, 26 +OUT 1 10, 25 - OUT 1 13, 28 + OUT 2 12, 27 - OUT 2 15, 30 + OUT 3 PIN No. PIN Function 14, 29 - OUT 3 7, 22 + OUT 4 6, 21 - OUT 4 4 + OUT 5 3 - OUT 5 PIN No. PIN Function 2, 17 + OUT 6 1, 16 - OUT 6 18 N.C
Page 5 of 5 Nov 9, 2021 | Rev d | Doc: DS_M8767 Series M8767 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in OUTLINE DRAWING Optimal Notes 4. Dimensions are in inches [mm] 5. Tolerance is: .XX 0.01IN .XXX 0.005 IN 6. Weight: Approx. 4.4 oz (125 g) *Specifications are subject to change without prior notice by the manufacturer