M8149 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Page 1 of 4 Sep 2, 2021 | Rev (d) | Doc: DS_M8149 Series M8149 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M8149 SERIES DC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- MINIATURE
- HIGH DENSITY
- QUAD OUTPUT
- UP TO 60W
Page 2 of 4 Sep 2, 2021 | Rev (d) | Doc: DS_M8149 Series M8149 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
APPLICATIONS
Military, Ruggedized, Telecom, Industrial SPECIAL FEATURES
- Miniature size
- High efficiency
- Wide input range
- Input / Output isolation
- Fixed switching frequency (250 kHz)
- TTL logic enable
- EMI/RFI filters included
- Indefinite short circuit protection with auto- recovery
- Input over-voltage shutdown with auto- recovery
- Over temperature shutdown with auto- recovery ENVIRONMENTAL Meets or exceeds MIL-STD-810D Temperature: Operating –55C to +85C (baseplate) Storage –55C to +125C RELIABILITY 150,000 hours, calculated per MIL-STD-217F at +85C baseplate, ground fixed. Note: Specifications are subject to change without prior notice by the manufacturer ELECTRICAL SPECIFICATIONS DC INPUT DC Input range: 18 to 48 VDC Input transient protection: All modules meet or exceed (no damage) MIL-STD-1275A (100V for 50 mSec) and MIL-STD-704A, MIL-STD-704D (80V for 0.1 Sec) Over-voltage shutdown with auto-recovery Efficiency: Up to 80% EMC: Designed to meet MIL-STD-461F* CE101, CE102, CS101, CS114, CS115, CS116, RE101, RE102, RS101, RS103 Isolation: 200V between Input and Output 200V between Input and Case DC OUTPUT (floating) Line/Load regulation: Less than 2% (no load to full load, –55C to +85C) Ripple and Noise: 50mVp-p, typical (max. 1%) Current limiting: Continuous protection for unlimited time Over voltage protection: Passive tranzorb on output. Over temperature protection: Shutdown at baseplate temperature of +100C (5C) Automatic recovery at baseplate temperature lower than +90C (5C) Isolation: 200V between Output and Input 100V between Output and Case * EMC compliance achieved when tested with 5 μH LISNs, shielded harness and static resistive load.
Page 3 of 4 Sep 2, 2021 | Rev (d) | Doc: DS_M8149 Series M8149 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Functions and Signals INHIBIT The INHIBIT signal is used to turn the power supply ON and OFF. TTL “1”or OPEN – Power supply is ON (For normal operation, leave this pin unconnected.) TTL “0” or SHORT to SIGNAL RTN – Power supply is OFF. SYNC The SYNC signal is used to allow the power supply's switching frequency to sync with the system clock. The external clock's frequency can be 250 kHz ± 10 kHz. When this pin is left open (unconnected) the power supply will synchronize to its internal clock, set at 250 kHz ± 10 kHz. SIGNAL RTN The SIGNAL RTN is used as a return path for the SYNC and INHIBIT signals. This pin is referenced to VIN RTN.
Page 4 of 4 Sep 2, 2021 | Rev (d) | Doc: DS_M8149 Series M8149 Series– DC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in PIN ASSIGNMENT PIN No. PIN Function PIN No. PIN Function PIN No. PIN Function 10, 11, 24, 25, 26 + VIN 3, 18 - OUT 2 16 SYN IN 7, 8, 9, 22, 23 VIN RTN 12, 27 + OUT 3 17 SIGNAL RTN 29, 30 + OUT 1 13, 28 - OUT 3 1 INHIBIT 14, 15 - OUT 1 5, 20 + OUT 4 2 CHASSIS 4, 19 + OUT 2 6, 21 - OUT 4 OUTLINE DRAWING Connector Type: RM272-030-312-2900 or Eq. Notes 1. Dimensions are in Inches [mm] 2. Tolerance is: .XX 0.01IN .XXX 0.005 IN 3. Weight: Approx. 3.5 oz (100 g.) Note: Specifications are subject to change without prior notice by the manufacturer