M714 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Page 1 of 3 Nov 2, 2021 | Rev d | Doc: DS_M714 Series M714 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M714 SERIES DC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- MINIATURE
- HIGH DENSITY
- QUAD OUTPUT
- DC/DC POWER SUPPLY
- UP TO 60 W
Page 2 of 3 Nov 2, 2021 | Rev d | Doc: DS_M714 Series M714 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
APPLICATIONS
Military, Ruggedized, Telecom, Industrial SPECIAL FEATURES
- Miniature size
- High efficiency
- Wide input range
- Up to 15 W/IN
- Input / Output isolation
- Fixed switching frequency (250KHz)
- TTL logic enable
- EMI/RFI filters included
- Indefinite short circuit protection with auto-recovery
- Input over-voltage shutdown with auto-recovery
- Over temperature shutdown with auto-recovery ENVIRONMENTAL Meets or exceeds MIL-STD-810D Temperature: Operating -55°C to +85°C (baseplate) Storage -55°C to +125°C RELIABILITY 150'000 hours, calculated per MIL-STD-217F at +85°C baseplate, ground fixed. * Specifications are subject to change without prior notice by the manufacturer ELECTRICAL SPECIFICATIONS DC INPUT DC input range: 18 to 48 VDC Input transient protection: All models meet or exceed (no damage) MIL-STD- 1275A (100V for 50mSec) and MIL-STD-704A, MIL-STD-704D (80V for 0.1Sec) Over-voltage shutdown with autorecovery Efficiency: up to 82% EMI/RFI: Design to meet or exceed MIL-STD-461C CE03, CE07, CS01, CS02, CS06, RE02, RS02, RS03 Isolation: 200V between Input and Output 200V between Input and Case DC OUTPUT (floating) Line /load regulation: Less than 2% (no load to full load, -55°C to +85°C) Ripple and noise: 50mVp-p, typical (max. 1%) Current limiting (Hiccup): Continuous protection for unlimited time. Over voltage protection: Passive transzorb on output. Over temperature protection: Shutdown at baseplate temperature of +100°C (±5°C) Automatic recovery at baseplate temperature lower than +90°C (±5°C) Isolation: 200V between Output and Input 100V between Output and Case
Page 3 of 3 Nov 2, 2021 | Rev d | Doc: DS_M714 Series M714 SERIES DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in PIN ASSIGNMENT Pin No. Pin Function 11, 23 + VIN 10, 22 VIN RTN 12, 24 + OUT 1 13, 25 - OUT 1 1, 14 + OUT 2 OUTLINE DRAWING Pin No. Pin Function
7 SYN IN
8 SIGNAL RTN
9 INHIBIT
No. Pin Function 2, 15 - OUT 2 3, 16 N.C. 4, 17 N.C. 5, 18 N.C. 6, 19 N.C. *Specifications are subject to change without prior notice by the manufacturer (OR EQ.) 2 PL. (CONN. D-TYPE 25 PIN) Notes 1. Dimensions are in Inches [mm] 2. Tolerance is: .XX ±.02 IN .XXX ±.01 IN 3. Weight: 8.8 Oz (250 gr)