M7017 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Page 1 of 6 Jul 20, 2022 | Rev (f) | Doc: DS_M7017 Series M7017 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M7017 SERIES DC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- MINIATURE
- HIGH DENSITY
- SINGLE OUTPUT
- DC/DC POWER SUPPLY
- UP TO 200 W CONTINUOUS,
330 W PEAK
Page 2 of 6 Jul 20, 2022 | Rev (f) | Doc: DS_M7017 Series M7017 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Applications
Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Special Features
- Miniature size
- High efficiency
- Wide input range
- Input / Output isolation
- Remote sense
- External On/Off Inhibit
- High Density – up to 25.3 W/in³
- Fixed switching frequency (250 kHz)
- External synchronization capability
- EMI filters included
- Indefinite short circuit and current limit protection with auto-recovery
- Over-voltage shutdown with auto-recovery
- Over temperature shutdown with auto-recovery Electrical Specifications DC Input: DC Output: Isolation: 18 to 48VDC per MIL-STD-704F. Output range – 1.5V to 60V 200V between Input and Output Works thorough surges as Output current – up to 15A 200V between Input and Case defined by: Output power – steady state 200W 100V between Output and Case MIL-STD-704A (80V for 0.1 Sec) Peak power – 330W up to 5 Sec No damage for: (after that overload protection MIL-STD-1275A (100V for 50mSec) turns output to 70% from output). Line/Load regulation: Efficiency: EMC: Less than 1% (no load to full load, –55 C to +85 C, and over input voltage range). Typical 88-90% - (full load, room temperature) at worst case. Designed to meet* MIL-STD-461F CE101, CE102, CS101, CS114 CS115, CS116, RE101, RE102 RS101, RS103 Ripple and Noise: Load Transient Overshoot and Turn on Transient Less than 50mVp-p, typical (max. undershoot No voltage overshoot during 100mV) without external Output change at load transient of startup. capacitance. When connected 30%-100% with tr & tf of max to system capacitance ripple 30µsec is 5% of output voltage. drops significantly. Output recover to steady stated within less 0.5ms. *Compliance achieved with 5μH LISN, shielded harness and static resistive load. Protections * Input
- Input reverse polarity: Protection for unlimited time
- Under voltage protection: Unit protects itself (shutdown) below 15VDC. Turn on at 16V-18V with min. 3V hysteresis to shut down.
- Over voltage protection – unit protects itself (shut down) above 86VDC. Output
- Electronic over voltage protection: Internal control protects unit (no damage) 10% above nominal voltage.
- Passive zener on output: 20% above nominal voltage.
- Current limiting: Continuous protection (10-30% above maximum current) for unlimited time (Hick up). General
- Over temperature protection: Shutdown at base plate temperature of +105 C C) Automatic recovery at base plate temperature lower than +95 C (
- POR: Protection override signal for BATTLE SHORT function * Thresholds and protections can be modified / removed – please consult factory.
Page 3 of 6 Jul 20, 2022 | Rev (f) | Doc: DS_M7017 Series M7017 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Environmental Design to Meet MIL-STD-810F Temperature: Operating: –55 C to +85 C Altitude: Method 500.4, Procedure I & II, 40,000 Salt Fog: Method 509-4 (base plate) Storage: –55 C to +125 C ft. and 70,000 ft. Operational Reliability Humidity: Vibration and Shock: Shock - Saw-tooth, 30g peak, 11mS. 150,000 hours, calculated per MIL-STD-217F at +85 C base minimum integrity exposure. (1 hour per axis.)
Page 4 of 6 Jul 20, 2022 | Rev (f) | Doc: DS_M7017 Series M7017 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Pin Assignment P1 – Input J2 – Output Pin No. Pin Function Pin No. Pin Function Pin No. Pin Function Pin No. Pin Function
1 N/C 9 VIN RTN 1 VOUT RTN 9 N/C
2 SYNC 10 VIN RTN 2 VOUT RTN 10 SENSE
3 INHIBIT 11 VIN 3 VOUT RTN 11 VOUT
4 POR 12 VIN 4 VOUT RTN 12 VOUT
5 SIGNAL RTN 13 VIN RTN 5 VOUT RTN 13 VOUT
6 VIN 14 VIN RTN 6 SENSE RTN 14 VOUT
7 VIN 15 VIN RTN 7 N/C 15 VOUT
8 VIN 8 N/C
The INHIBIT signal is used to turn the power supply ON and OFF. TTL “1” or OPEN – will turn on the power supply. (For normal operation leave the signal not connected.) TTL “0” or short– will turn off the power supply. SYNC signal The SYNC IN signal is used to allow the power supply frequency to sync with the system frequency. The system frequency should be 250kHz ± 10kHz. When not connected the power supply will work at 250kHz SIGNAL RTN The INPUT SIGNAL RTN is referred to the input. This is used as grounding for SYNC IN, INHIBIT and POR signals. SENSE The SENSE is used to achieve accurate load regulations at load terminals (this is done by connecting the pins directly to the load’s terminals). The use of remote sense has a limit of voltage dropout between converter’s output and load terminals up to 0.5V. When not used connect + SENSE to +VOUT and –SENSE to –VOUT POR (Protection Override) The POR signal disables the Input Under Voltage protection, Input Over Voltage Protection, Over Temperature protection and Hiccup function (overcurrent and short circuit). TTL “0” or short – All protections are disabled (override mode). TTL “1” or OPEN – All protections are enabled (protected mode).
Page 5 of 6 Jul 20, 2022 | Rev (f) | Doc: DS_M7017 Series M7017 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Outline Drawing Heat Dissipation Surface Notes 1. Dimensions are in Inches [mm] 2. Tolerance is: .XX 0.02 IN .XXX 0.008 IN 3. Weight: Approx. 400g (14.1 oz) 4. Mounting holes can be modified – please consult factory. 5. Parasolid 3D module is available for download on site. * Specifications are subject to change without prior notice by the manufacturer.
Page 6 of 6 Jul 20, 2022 | Rev (f) | Doc: DS_M7017 Series M7017 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Standard Configurations Part number Input voltage range Output Voltage Output Current M7017-101 18 to 48 VDC 28.5 VDC 7 A