M7009 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Page 1 of 8 Nov 2, 2021 | Rev n | Doc: DS_M7009 Series M7009 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M7009 SERIES DC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- MINIATURE
- HIGH DENSITY
- SINGLE OUTPUT
- DC/DC POWER SUPPLY
- UP TO 75W
Page 2 of 8 Nov 2, 2021 | Rev n | Doc: DS_M7009 Series M7009 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Applications
Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Power Supply Special Features
- Miniature size
- High efficiency
- Input / Output isolation
- Fixed switching freq.
- EMI filters included
- Remote inhibit (On/Off)
- Non-latching protections: o Input under/over voltage o Overload/Short-circuit o Over temperature Electrical Specifications DC Input Normal steady-state voltage range: 18 to 36 VDC DC Output Voltage range: 3.3 to 56 V Current range: 0 to 10 A Power range: 0 to 75 W Isolation Input to Output: 200 VDC Input to Case: 200 VDC Output to Case: 100 VDC Abnormal transient protection† MIL-STD-1275A (100 V for 50 ms) MIL-STD-704A (80 V for 0.1 s) Efficiency 80% typical (28V variant, at nominal input voltage, full load, room temperature) EMC Meets* MIL-STD-461F CE102, CS101, CS114, CS115, CS116, RE102, RS103. Designed to meet* MIL-STD-461F CE101, RE101, RS101 Output voltage regulation Less than ±1% (low to high input voltage, no load to full load, –55 C to +85 C at baseplate). Ripple and Noise 100-150 mVp-p, typical (max. 1%) without external capacitance. Turn-on Transient No overshoot. † Converter will not be damaged, but may shutdown during the transient, and restart once input voltage is back within range. * Compliance achieved with 5μH LISN, shielded harness and static resistive load.
Page 3 of 8 Nov 2, 2021 | Rev n | Doc: DS_M7009 Series M7009 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Protections ** Input
- Under-Voltage Lockout Converter shuts if input voltage is below 16 ± 1V.
- Over-Voltage Lockout Converter shuts down if input voltage is above 51 ± 2V. Output
- Active Over-Voltage Protection Passive transorb selected at 110% ± 5% at output.
- Passive Over-Voltage Protection Transorb at output selected 20% ± 5% above nominal voltage.
- Overload / Short-Circuit Protection Output voltage turns off and on periodically with low duty-cycle (hiccup) to protect system conductors and converter from short circuit. General
- Over Temperature Protection Shutdown if baseplate temperature exceeds +105 C ± 5 C. Automatic recovery upon cooldown to below +95 C ± 5 C. Environmental Conditions Designed to meet MIL-STD-810G Temperature Methods 501.5 & 502.5 Operating: –55 C to +85 C (at baseplate) Storage: –55 C to +125 C (ambient) Vibration Method 514.6 Category 7: Aircraft – Jet, IAW figure C-6, 13.7grms, 1 hour per axis. Category 24: Minimum integrity, IAW figure E-3, 7.7 grms, 1 hour per axis. Altitude Method 500.5 Procedures I – up to 70,000 ft. (non-operational) Procedure II – up to 70,000 ft. (operational) Shock Method 516.6 Operational shock: 30 g, 11 ms, half-sine Crash safety: 100 g, 6 ms, half-sine Humidity Method 507.5 Up to 95% RH Salt Fog Method 509.5 Reliability 150,000 hours, calculated per MIL-STD-217F Notice 2 at +85C baseplate, Ground Fix environment. Environmental Stress Screening (ESS) Including random vibration and thermal cycles is also available. Please consult factory for details. ** Thresholds and protections can be modified / removed – please consult factory.
Page 4 of 8 Nov 2, 2021 | Rev n | Doc: DS_M7009 Series M7009 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Typical Efficiency/Loss Curves M7009-101 (12 VDC output) M7009-104 (28 VDC output) 70% 71% 72% 73% 74% 75% 76% 77% 78% 79% 80% 81% 82% 83% 84% 0 10 20 30 40 50 60 70 80 90 100 Efficiency Output Power [W] Efficiency 18V Input 28V Input 36V Input 0 10 20 30 40 50 60 70 80 90 100 Loss Output Power [W] Loss 18V Input 28V Input 36V Input 62% 64% 66% 68% 70% 72% 74% 76% 78% 80% 82% 84% 0 10 20 30 40 50 60 70 80 90 Efficiency Output Power [W] Efficiency 18VDC 28VDC 36VDC 0 10 20 30 40 50 60 70 80 90 Loss Output Power [W] Loss 18VDC 28VDC 36VDC
Page 5 of 8 Nov 2, 2021 | Rev n | Doc: DS_M7009 Series M7009 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Typical MIL-STD-461F Conducted Emissions Plots The following measurements were performed with 5 μH LISNs M7009-101 (12 VDC output) Test conditions: Input Voltage: 28.074 VDC Output Voltage: 12.018 VDC Current: 6.048 A Power: 72.68 W CE101 (30 Hz to 150 kHz) CE102 (150 kHz to 10 MHz) M7009-104 (28 VDC output) Test conditions: Input Voltage: 28.01 VDC Output Voltage: 28.015 VDC Current: 2.8524 A Power: 79.9 W CE101 (30 Hz to 150 kHz) CE102 (150 kHz to 10 MHz)
Page 6 of 8 Nov 2, 2021 | Rev n | Doc: DS_M7009 Series M7009 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Functions and Signals INHIBIT (pin 8) Description: The INHIBIT signal is used to turn the power supply ON and OFF. Operation: Applying “1” or leaving open will turn the power supply ON. For constant operation, leave this pin unconnected. Applying “0” or shorting this pin to its return line will turn the power supply OFF. (Optional to change the logic of this signal. Please consult with factory.) Signal Type: 5V TTL or dry contact (open/short). Return line: This signal is referenced to INHIBIT RTN pin. Optional to change the logic of these signals. Please consult with the factory. SENSE (pin 2) & SENSE RTN (pin 3) Description: The SENSE is used to compensate for voltage drop across the output wires by sensing the voltage at the load and correcting the increasing the output voltage accordingly, to provide the desired voltage at the load's terminals. Operation: Connect the SENSE pin to the positive load terminal, and the SENSE RTN pin to the negative (return) load terminal. The sense compensation is typically limited to 5% or 0.5V – the lesser of the two. If not used, connect SENSE directly to OUTPUT pins, and the SENSE RTN pin directly to the OUTPUT RTN pins. IMPORTANT: to avoid damage to the converter and/or the load - DO NOT LEAVE THE SENSE/SENSE RTN PINS UNCONNECTED. Pin Assignment Connector: M24308/24-38F or eq. Mates with: M24308/2-2F or eq. Pin No. Function Pin No. Function
1 OUTPUT +
9 OUTPUT +
2 SENSE +
10 OUTPUT +
3 SENSE RTN –
11 OUTPUT +
4 OUTPUT RTN –
12 OUTPUT RTN –
5 OUTPUT RTN –
13 OUTPUT RTN –
6 INPUT RTN –
14 INPUT RTN –
7 INPUT +
15 INPUT +
8 INHIBIT +
Page 7 of 8 Nov 2, 2021 | Rev n | Doc: DS_M7009 Series M7009 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Outline Drawing Notes 1. Dimensions are in inches [mm] 2. Tolerance is: .XX ± 0.01 in .XXX ± 0.005 in 3. Weight: 4.76 oz [135 g]
Page 8 of 8 Nov 2, 2021 | Rev n | Doc: DS_M7009 Series M7009 DC/DC POWER SUPPLY Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Standard Configurations This PN can be configured to any output voltage within its possible range (see 'DC Output – Voltage range' in 'Electrical Specifications' table). Part Number Output Voltage Max Output Current M7009-100 5 VDC 10 A M7009-101 12 VDC 6 A M7009-102 15 VDC 5 A M7009-103 24 VDC 3 A M7009-104 28 VDC 2.5 A M7009-105 48 VDC 1.5 A Note: Specifications are subject to change without prior notice by the manufacturer