M57140-01 ISAHAYA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

15V, 30mA OUT PUT 15V, 30mA OUT PUT 15V, 30mA 1 2 3 4 5 6 OUT PUT 15V, 100mA , , , , B A E G H F D C J TERMINAL NUMBER Dimensions Inches Millimeters A 2.03 51.5 B 0.71 18.0 MAX C .39±.06 12.5±1.5 D .18±.06 4.5±1.5 E 0.07 1.8 Dimensions Inches Millimeters F 0.02 0.55 G 0.08 2.1 H 0.08 2.1 J 1.13 28.8 Description: M57140-01 is an isolated DC-to-DC converter designed to drive IPMs (Intelligent Power Modules). With an input of DC 20V, the module supplies four 15V outputs. Isola- tion is provided from primary to secondary and also between the secondaries. Interwinding isolation is designed for driving the IPM. Features::

  • Output Specification: +15V x 4, Total 3W max.
  • Primary-to-secondary Isolation:

2500 VRMS , One Minute

  • Secondary-to-secondary Isolation Voltage:

1500 VRMS , One Minute

  • Compact, Low Profile Design Applications:
  • IPMs for General Purpose Inverter and AC Servo
  • Power Source for MOSFET Driving Circuits Ordering Information: M57140-01 Outline Drawing and Circuit Diagram HYBRID IC M57140-01 IPM POWER SUPPL Y HYBRID IC

Between Pins 10 - 9 , 12 - 11, 14 - 13, IL = 30mA Between Pins 8 - 7 , IL = 100mA Between Pins 10 - 9 , 12 - 11, 14 - 13, IL = 30mA Between Pins 8 - 7 , IL = 100mA Absolute Maximum Ratings, VIN = 20V, Ta = 25 °C unless otherwise specified Item Symbol Test Conditions Limit Units Input Voltage VIN 25 Volts Load Current IL 30 mA 100 mA Operating Temperature Topr There Should be -10 ~ +75 °C Storage Temperature Tstg No Condensation -20 ~ +85 °C Internal Power Dissipation Pd Ð 1.5 W atts Primary-to-Secondary Isolation 1 Minute 2500 Vrms Secondary-to-Secondary Isolation 1 Minute 1500 Vrms Electrical Characteristics, VIN = 20V, Ta = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Input Source Voltage VIN Direct Current 18 20 22 Volts Output Voltage VO 13.5 15.0 16.5 Volts 13.5 15.0 16.5 Volts Peak Load Current ILP Ð3 3 Ð m A Ð 110 Ð m A Load Regulation Reg-out Ð 5 10 % Ð 7 12 % Efficiency h Ð7 0 Ð % Ð7 0 Ð % Between Pins 10 - 9 , 12 - 11, 14 - 13, IL = 0 ~ 30mA Between Pins 8 - 7 , IL = 0 ~ 100mA Between Pins 10 - 9 , 12 - 11, 14 - 13, IL = 0 ~ 30mA Between Pins 8 - 7 , IL = 0 ~ 100mA Between Pins 10 - 9 , 12 - 11, 14 - 13 Between Pins 8 - 7 Between Pins 10 - 9 , 12 - 11, 14 - 13, IL = 30mA Between Pins 8 - 7 , IL = 100mA Between Pins 10 - 9 , 12 - 11, 14 - 13, IL = 30mA Between Pins 8 - 7 , IL = 100mA Terminals 4 , 5 , 6 - 1 , 2 , 3 Terminals 14 - 13 , 12 - 11 , 10 - 9 Terminals 8 - 7 Terminals 4 , 5 , 6 - 1 , 2 , 3 Terminals 14 - 13 , 12 - 11 , 10 - 9 Terminals 8 - 7 4 5 6 1 2 3 IL 33mF 330mF VC IL 10mF + VC IL VIN = 20V 10mF M57140-01 + VC IL 10mF + VC , , , , Application Circuit HYBRID IC M57140-01 IPM POWER SUPPL Y HYBRID IC

+INPUT DC113V-380V M57120L-01 M57140-01 +15 RC SG AMP P U V W N AMP AMP AMP AMP AMP IPM SG SG SG SG SG RC RC RC +15 +15 +15 050V 47mF 50V 330mF 2.2mF R – TO STABILIZE WHEN NOT LOADED C – TO SMOOTH OUTPUT VOLTAGE , , , , Handling Precautions:

  • When M57140-01 is used under excessive load condition, output side rectifying diodes will be destroyed. Care should be exercised so as not to operate the device above the rated maximum load current.
  • Coating Materials should not be applied on this device because the application of coating materials for waterproofing could cause a stress and destroy a device. Application Circuit HYBRID IC M57140-01 IPM POWER SUPPL Y HYBRID IC

IPM POWER SUPPL Y HYBRID IC OUTPUT VOLTAGE VS AMBIENT TEMPERATURE BETWEEN TERMINALS AND AMBIENT TEMPERATURE, T a, (°C) OUTPUT VOLTAGE, V o, (VOLTS) 02 0 40 8060 -20

16 IL = 100mA

VIN = 20V CONDITION: OTHER OUTPUT TERMINALS ARE NOT LOADED OUTPUT VOLTAGE - LOAD CURRENT CHARACTERISTICS BETWEEN TERMINALS AND LOAD CURRENT, I L, (mA) OUTPUT VOLTAGE, V o, (VOLTS) 20 40 60 10080 VIN = 20V CONDITION: OTHER OUTPUT TERMINALS ARE NOT LOADED Ta = 60°C 25°C 0°C 8 7 OUTPUT VOLTAGE -LOAD CURRENT CHARACTERISTICS BETWEEN TERMINALS - , - , - LOAD CURRENT, I L, (mA) OUTPUT VOLTAGE, V o, (VOLTS) 10 3020 Ta = 60°C 0°C, 25°C 10 9 12 11 14 13 VIN = 20V CONDITION: TERMINALS AND ARE NOT LOADED 8 7 OUTPUT VOLTAGE VS AMBIENT TEMPERATURE BETWEEN TERMINALS - , - , - 10 9 12 11 14 13 AMBIENT TEMPERATURE, T a, (°C) OUTPUT VOLTAGE, V o, (VOLTS) 02 0 40 8060 -20

16 IL = 30mA

VIN = 20V CONDITION: TERMINALS AND ARE NOT LOADED 8 7 OUTPUT VOLTAGE VS INPUT VOLTAGE BETWEEN TERMINALS AND INPUT VOLTAGE, V IN, (VOLTS) OUTPUT VOLTAGE, V o, (VOLTS) 18 19 20 232221 IL = 0mA IL = 100mA 8 7 Ta = 25°C OUTPUT VOLTAGE VS INPUT VOLTAGE BETWEEN TERMINALS - , - , - 10 9 12 11 14 13 INPUT VOLTAGE, V IN, (VOLTS) OUTPUT VOLTAGE, V o, (VOLTS) 18 19 20 232221 IL = 0mA Ta = 25°C 30mA INPUT CURRENT - OUTPUT POWER 0.1 0.2 OUTPUT POWER, P o, (WATTS) INPUT CURRENT, IIN, (mA) 12 43 0.3 Ta = 0°C 25°C 60°C VIN = 20V EFFICIENCY CHARACTERISTICS TOTAL OUTPUT POWER, P o, (WATTS) EFFICIENCY, h, (%) 12 3 4 Ta = 25°C VIN = 20V

IPM POWER SUPPLY HYBRID IC FOR SAFETY USING Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production, and in it’s reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage. When handling Hics, please note the following cautions. CAUTIONS Packing Carrying Storage Extended storage Maximum ratings Polarity The materials used in packing Hics can only withstand normal external conditions. When exposed to outside shocks, rain and certain environmental contaminators, the packing materials will deteriorates. Please take care in handling. 1) Don’t stack boxes too high. Avoid placing heavy materials on boxes. 2) Boxes must be positioned correctly during transportation to avoid breakage. 3) Don't throw or drop boxes. 4) Keep boxes dry. Avoid rain or snow. 5) Minimal vibration and shock during transportation is desirable. When storing Hics, please observe the following notices or possible deterioration of their electrical characteristics, risk of solder ability, and external damage may occur. 1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius with humidity at 40 to 60%. 2) Avoid locations where corrosive gasses are generated or w here much dust accumulates. 3) Storage cases must be static proof. 4) Avoid putting weight on boxes. When extended storage is necessary, Hics must be kept non-processed. When using Hics which have been stored for more than one year or under severe conditions, be sure to check that the exterior is free from flaw and other damages. To prevent any electrical damages, use Hics within the maximum ratings. The temperature, current, voltage, etc. must not exceed these conditions. To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in inserting leads into the board holes, conforming to the external view for the terminal arrangement.

IPM POWER SUPPLY HYBRID IC Marketing division, Marketing planning department 6 -41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan Keep safety first in your circuit designs!

  • ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility th at trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as ( 1) placement of substitutive, auxiliary, (2) use of non-farmable material or ( 3) prevention against any malfunction or mishap. Notes regarding these materials
  • These materials are intended as a reference to our customers in the selection of the ISAH AYA products best suited to the customer’s application; they don't convey any license under any intellectual prop erty rights, or any other rights, belonging ISAHAYA or third party.
  • ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials.
  • All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, a nd are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein.
  • ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human lif e is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transpor tation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
  • The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials.
  • If these products or technolo gies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re -export contrary to t he export control laws and regulations of Japan and/or the country of destination is prohibited.
  • Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein. Nov.2002