M3110 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 10
Technical content
Page 1 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in M3110 SERIES 3-PHASE AC/DC POWER SUPPLY PRODUCT HIGHLIGHTS
- ULTRA-LOW INPUT CURRENT THD
- HIGH POWER FACTOR
- HIGH EFFICIENCY
- SINGLE OUTPUT
- LAGGING POWER FACTOR OPTIONAL
- UP TO 1000 W
Page 2 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in
Applications
Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Special Features
- High efficiency
- Wide input range
- Input / Output isolation
- Limited Inrush Current
- EMI filters included
- THDI < 2% @ full load
- Remote On/Off
- Output Good signal (option)
- Indefinite short circuit protection with auto-recovery
- Over-voltage shutdown
- Over temperature shutdown with auto-recovery Electrical Specifications AC Input DC Output Isolation Nominal: Voltage range: 5 to 50 VDC Input to Output: 500 VDC 115/200 VAC, 47-440 Hz, 3- phase Output power: up to 1000 W Output Current: Up to 40A Input to Case: 500 VDC Output to Case: 100 VDC Steady state: 100 to 130 VAC (173 to 225 VAC Line to line) Transients:
180 VAC (312VAC Line to
line)/ 50 msec per MIL-STD- 704 Full performances between 104 to 127VAC (180 to 220VAC Line-to-Line Output Voltage Regulation Efficiency EMC Up to ±1% (no load to full load, 88% Typical (nominal input, Complies with MIL-STD-461E: over input voltage normal range, –40 C to +71 C) 28VDC output, full load, room temperature) CE101, CE102, CS101, CS114, CS115, CS116, RE102, RS103 Ripple and Noise 100−150 mVp-p, typical (max. Turn on Transient No Voltage over shoot during Power Factor Lagging PF per MIL-STD-704F Optional. Please consult factory for details. 1%) without external power on. capacitance.
Page 3 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Protections and Properties* Input
- Inrush Current: Up to 0.09 A2sec (for circuit breaker selection purposes) Up to 6 x Iin,max in the first 20 ms post energizing.
- Phase loss detection: The unit disable in case of phase loss. Output
- Over Voltage Protection: Shutdown and latch at 10-20% above maximum voltage.
- Current Limiting: Continuous protection less than 150% of the current rating. General
- Over Temperature Protection: Shutdown at base plate temperature of +100 C 5 C Automatic recovery at base plate temperature of +85 C 5 C. Environmental Conditions Designed to meet MIL-STD- 810F Temperature Operating: –40 C to +71 C (at Altitude Method 500.4, Procedure I & II: Salt Fog Method 509.4 baseplate) Storage: –55 C to +125 C Up to 70,000 ft. non-operational Up to 50,000 ft. operational Humidity Vibration (random) Shock Method 507.4 Method 514.5 Method 516.5 Procedure I Category 4 - General minimum Procedure I Up to 95% RH integrity exposure 30 g, 11 ms terminal peak saw- IAW Figure 514.5C-17 tooth, 1 hour per axis. Reliability 74,677 hours, at +71 °C baseplate, Airborne Inhabited Fighter (AIF) environment. 37,128 hours, at +71 °C baseplate, Airborne Uninhabited Fighter (AUF) environment. 1,505,738 hours, at +25 °C baseplate, Ground Fixed (GF) environment. Calculated IAW MIL-HDBK-217F Notice 2. Environmental Stress Screening (ESS) Including random vibration and thermal cycles is also available. Please consult factory for details. * Thresholds and protections can be modified / removed – please consult factory.
Page 4 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Highlights and Typical Characteristics Input Current Harmonics Input: 3x 115 Vrms /
400 Hz Output: 28 VDC /
Power Factor and THDI vs. Load Output Power [W] 1000 0 100 200 300 400 500 600 700 800 900 40% 30% 20% 10% 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Power Factor and Current THD vs load PF THDI
Page 5 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Pin Assignment Standard Version J1 - Input Connector Connector type: M24308/24-26F or eq. Mates with: M24308/2-2F or eq. Pin No. Pin Function Pin No. Pin Function
1 PHASE A 9 PHASE A
2 PHASE A 10 CHASSIS
3 N.C. 11 N.C.
4 PHASE B 12 PHASE B
5 PHASE B 13 N.C. 6 N.C. 14 CHASSIS
7 PHASE C 15 PHASE C
8 PHASE C
Connector type: M24308/2-1F or eq. Mates with: M24308/4-1F or eq. Pin No. Pin Function
1 REMOTE SENSE (+)
2 REMOTE SENSE (–)
3 N.C. 4 N.C. 5 N.C. 6 N.C. 7 N.C. 8 N.C.
9 REMOTE
Page 6 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Pin Assignment Optional J1 - Input Connector Connector type: M24308/24-26F or eq. Mates with: M24308/2-2F or eq. Pin No. Pin Function Pin No. Pin Function 3 N.C. 11 N.C. 5 PHASE B 13 N.C. 6 N.C. 14 CHASSIS Connector type: M24308/2-1F or eq. Mates with: M24308/4-1F or eq. Pin No. Pin Function 3 N.C.
4 Power Good RTN
5 N.C. 6 N.C. 7 N.C.
8 Power Good
Page 7 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Functions and Signals REMOTE SHUTDOWN signal The SHDN signal is used to turn the power supply ON and OFF. OPEN will turn the power supply ON. 5V applied between pin 9 and pin 2 will turn the power supply OFF. REMOTE SENSE signal The SENSE is used to achieve accurate load regulation at the load (this is done by connecting the pins directly to the load). The remote sense will compensate up to 2V or 10% of the nominal voltage, the lower of. In case remote sense is not required, short the +SENSE pin to the +OUT stud and the –SENSE pin to the –OUT stud. Power Good signal - Optional Uncommitted collector and emitter of an opto-isolator. Low (V< 0.8 @ 1mA, relative to Power Good RTN) indicates normal output voltage. Open (I< 0.1mA @ 5V) indicates low output voltage (due to over load, inhibited output or a failure). Absolute maximum ratings (Power Good to Power Good RTN): -0.5V/+15V Typical Connection Diagram M3110 Phase A Phase C (-) VOUT (+) VOUT Load Input Voltage SHDN (-) Sense (+) Sense Phase B Chassis Power Good Optional
Page 8 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Outline Drawing This figure is for reference only. For more details see Drawing M3110100
Page 9 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Notes 1. Dimensions are in Inches 2. Tolerance is: .XX 0.03 IN .XXX .10 IN 3. Weight: Approx. 6 lbs [2.75 kg]
Page 10 of 10 Oct 25, 2021 | Rev h | Doc: DS_M3110 Series M3110 Series– AC/DC Power Supply Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Standard Configurations Part number Input Output Special features Voltage range Frequency Voltage Current M3110-100 3-phase, 104 to 127 VAC 50/60/400 Hz 5 VDC 40 A M3110-101 3-phase, 104 to 127 VAC 50/60/400 Hz 12 VDC 40 A M3110-102 3-phase, 104 to 127 VAC 50/60/400 Hz 15 VDC 40 A M3110-103 3-phase, 104 to 127 VAC 50/60/400 Hz 24 VDC 40 A M3110-104 3-phase, 104 to 127 VAC 50/60/400 Hz 28 VDC 36 A M3110-105 3-phase, 104 to 127 VAC 50/60/400 Hz 48 VDC 21 A M3110-106 3-phase, 104 to 127 VAC 50/60/400 Hz 28 VDC 36 A Parallel operation via output voltage droop. Voltage regulation is ±3%. M3110-107 3-phase, 104 to 127 VAC 50/60/400 Hz 48 VDC 21 A Parallel operation via output voltage droop. Voltage regulation is ±3%. Note: Specifications are subject to change without prior notice by the manufacturer