M3002-1 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Cham, www.enercon-europe.com Switzerland sales@enercon-europe.com Netanya, www.enercon.co.il Israel sales@enercon.co.il Gurgaon, www.mpsindia.in India sales@mpsindia.in Page 1 of 2 JUN 18, 2023 Rev (A) Doc: L.C COLD PLATE ENERCON P/N M 1-2300 Liquid Cooled Cold Plate Specifications and Parameters This cold plate is a d eep-drilled type, allowing an optimal heat dissipation at a flow rate of 1. 8 [GPM]. Due to the resulting 0.0177 [°C/W] thermal resistance at this flow rate, the cold plate can dissipate 1.2 [kW] with an average temperature rise of only 10.0 [°C] (between the cold plate's user interface and inlet fluid), by using a cooling fluid at an inlet temperature of 20 [°C]. Design Features1
- Single side cooling
- Adaptable design platform
- Controlled Pressure drop (using internal orifices)
- High pressure (burst-proof)2: 300 [psi]
- Leakage proof3: 250 [psi]
- Pressure loss @1.8[GPM] : 12 [psi] (see table below)
- Quick release valves
- Max weight: 6.3 [kg] Performance Curves PRESSURE DROP & THERMAL RESISTANCE vs. FLOW RATE 1 Tested using 66% ethylene glycol and 34% distilled water. Coolant with higher distilled water ratio will result in a lower thermal resistance. 3 Tested in water bath for 5 minutes. Success criteria was no bubbles. 4 Recommended working point- 1.6 [GPM]. M3002-1 Flow rate [GPM] R ]°C/W [ ΔP (psi) 0.25 0.0402 0.36 0.50 0.0317 1.25 0.75 0.0267 2.51 1.00 0.0240 4.14 1.25 0.0213 6.14 1.50 0.0195 8.56 1.80 0.0177 12.03 2.00 0.0166 14.66 2.50 0.0152 21.89
Cham, www.enercon-europe.com Switzerland sales@enercon-europe.com Netanya, www.enercon.co.il Israel sales@enercon.co.il Gurgaon, www.mpsindia.in India sales@mpsindia.in Page 2 of 2 JUN 18, 2023 Rev (A) Doc: L.C COLD PLATE Notes: 1. Dimensions are in mm [In]. 3. First angle projection : 4. Material: Al 6061, Thermal treatment T651/ T6511. 5. Finish: chromate conversion coating per MIL-DTL-5541, type I, class 1A. 6. Additional threads and lengths are optional according to customer requirements. 7. Hardware information: 7.1. Coupler )outlet cooling(: Manufacturer: “HAM-LET GROUP”. P/N: QCE6-SS-B-FL37-3-8-R2. 7.2. Nipple )inlet cooling ( : Manufacturer: “HAM-LET GROUP”. P/N: QCE6-SS-SAES-3/8-R150 . Outline Drawing