M3001-1 ENERCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Page 1 of 2 JAN 25, 2023 Rev (-) Doc: L.C COLD PLATE Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in ENERCON P/N M3001-1 Liquid Cooled Cold Plate Specifications and Parameters This cold plate is a d eep-drilled type, allowing an optimal heat dissipation at a flow rate of 1. 0 [GPM]. Due to the resulting 0.0103 [°C/W] thermal resistance at this flow rate, the cold plate can dissipate 2. 6 [kW] with an average temperature rise of only 18.5 [°C] (between the cold plate's user interface and inlet fluid), by using a cooling fluid at an inlet temperature of 20 [°C]. Design Features1
- Two sides cooling
- Adaptable design platform
- Controlled Pressure drop (using internal orifices)
- High pressure (burst-proof)2: 300 [psi]
- Leakage proof3: 250 [psi]
- Pressure loss @ 1[GPM] : 15[psi] (see table below)
- Quick release valves
- Internal orifice
- Max weight: 6.6 [kg] Performance Curves PRESSURE DROP & THERMAL RESISTANCE vs. FLOW RATE 1 Tested using 50% ethylene glycol + 50% distilled water. Coolant with higher distilled water ratio will provide smaller thermal resistance. 2 Pressure loss- 0.17 [psi]. Test duration- 10 minutes. Max allowed pressure drop- 0.25 [psi]. 3 Tested in water bath for 5 minutes. Success criteria was no bubbles. 4 Recommended working point- 1.5 [GPM]. M3001-1 Flow rate [GPM]** R ]°C/W [ ΔP (psi) 0.25 0.0167 1.17 0.50 0.0145 4.26 0.75 0.0121 8.97 1.00 0.0103 15.47 1.25 0.0088 23.44 1.50 0.0078 32.74 1.8 0.0070 43.49 2.00 0.0062 54.96 2.35 0.0059 74.81 0.25 0.0167 1.17
Page 2 of 2 JAN 25, 2023 Rev (-) Doc: L.C COLD PLATE Switzerland sales@enercon-europe.com Israel sales@enercon.co.il India sales@mpsindia.in Outline Drawing Notes: 1. Dimensions are in mm [In]. 3. First angle projection : 4. Material: Al 6061, Thermal treatment T651/ T6511. 5. Finish: chromate conversion coating per MIL-DTL-5541, type I, class 1A. 6. Additional threads and lengths are optional according to customer requirements. 7. Hardware information: 7.1. Coupler )inlet cooling(: Manufacturer: “HAM-LET GROUP”. P/N: QCE6-SS-B-FL37-3-8-R2. 7.2. Nipple )outlet cooling(: Manufacturer: “HAM-LET GROUP”. P/N: QCE6-SS-SAES-3/8-R150 .